- Home
- Equipment
Refine by
Turbines Environmental Equipment & Supplies
15 equipment items found
Manufactured by:Turbines Inc. based inAltus, OKLAHOMA (USA)
The TMG Series gas flow meter delivers accurate measurement in a variety of applications. This durable turbine meter is designed to withstand challenging conditions and deliver accurate results over a long service life. The Turbines Inc. gas flow meter delivers +/- 1% standard accuracy over the flow range. For every turbine flow meter manufactured by Turbines, Inc., a unique K-factor is ...
Manufactured by:National Turbine Corporation based inSyracuse, NEW YORK (USA)
Number of Stages : 1 through 6. Inlet Connection : 5" Tube or ANSI Flange. Outlet Connection : 5" ANSI Flange. Operating Speed : 3525 RPM. Maximum Casing Pressure : 15 PSIG. Bearings : Ball, self—aligning, flange mount, Life per ABMA B-10 standard Grease. Lubrication : Grease. Impeller Diameter : 19" (483mm). Impeller Tip Speed : 18,534 FPM (5344m/min). Drive : Direct coupled (belt drive ...
Manufactured by:Turbines Inc. based inAltus, OKLAHOMA (USA)
The LF Series flow meter is manufactured specifically for low-flow applications ranging from .007 to 3gpm. The Low Flow Meter can handle working pressures up to 20,000psi (based on end-connection used) and deliver +/- .25% repeatability over the specified flow range. Turbines, Inc. documents the K-factor for each meter by means of a 20-point NIST-traceable factory or independent laboratory ...
Manufactured by:Turbines Inc. based inAltus, OKLAHOMA (USA)
The ZQ320 provides the optimum in performance, reliability and convenience in mobile printing. Using Bluetooth communications the printer can communicate with the CDS1000 remotely. This intelligent printer automatically enters sleep mode when it is idle, and automatically wakes up upon receipt of a printing job; no need for workers to remember to turn off the printer to save power. Charging ...
Manufactured by:Turbines Inc. based inAltus, OKLAHOMA (USA)
The F Series Flow Monitor by Turbines, Inc. is engineered to effectively address the measurement needs across a wide swath of industries such as industrial, agricultural, commercial, and oil and gas sectors. These monitors are adept at handling a spectrum of flow measurement tasks requiring high accuracy and reliability. They feature a backlit LCD display that shows both rate and total flow ...
Manufactured by:Turbine Marine Inc based in1940 NW 32nd St, FLORIDA (USA)
GENERATOR SPECIFICATIONS: 1MW Continuous Duty. 1.1MW Standby peak. Highly portable built-in air lift rigging. Size 20’L x 8’W x 8’H. Weight: 19,500 lbs. 380-400V, 50 Hz. 440-480V, 60 Hz. ...
Manufactured by:Hansen Turbine Assemblies based inGalax, VIRGINIA (USA)
Reduce costs and outage downtime with Hansen Turbine’s American made axial flow compressor section blading, VIGV’s, stator ring and vane assemblies. Our extensive inventory of rotating and stationary compressor blading is manufactured from 403CB or C450 to meet your ...
Manufactured by:Hansen Turbine Assemblies based inGalax, VIRGINIA (USA)
Protect valuable ground or flight turbines: give them serious corrosion and erosion resistance with excellent surface finish coatings. Where tight tolerances or the potential for media entrapment exists, or on dimensionally critical surfaces thinner coatings can be applied. Some applications require no media finishing to achieve a final ...
Manufactured by:Turbines Inc. based inAltus, OKLAHOMA (USA)
The WM Liquid Wafer Style Turbine flow meter is a highly-versatile product line that offers all stainless steel, precision-machined components with CD4MCu and/or 416 stainless steel rotors in line sizes from 3/8″ through ...
Manufactured by:Tecfluid S.A based inSant Just Desvern, SPAIN
Vibrating fork level switch for liquids and solids. Compact and Robust. High resistance to high temperatures and pressures. Possibility of selection of activation, with or without the presence of product, and detection of granular solids. No moving parts and low ...
Manufactured by:National Turbine Corporation based inSyracuse, NEW YORK (USA)
Number of Stages : 1 through 5. Inlet Connection : 2 7/8 Pipe, (optional) 2 1/2 NPT or 3" (76.2 mm) Flange, ASA 125# Drillinc. Outlet Connection : 2 7/8 Pipe, (optional) 2 1/2 NPT or 3" (76.2 mm) Flange, ASA 125# Drillinc. Operating Speed : 3550,7050 or 8180 RPM. Maximum Casing Pressure 15 PSIG (1.05 kg/cm2). Seals (air) : Labyrinth. Bearings : Ball, 10-Year Minimum Life Per AFBMA B-10 Standard ...
Manufactured by:Turbines Inc. based inAltus, OKLAHOMA (USA)
The E Series Flow Monitor by Turbines Incorporated is engineered to meet high standards for explosion-proof performance. It ensures safety in daily operations, with a design that surpasses typical environmental requirements. This robust flow rate indicator and totalizer is tailored for integration with turbine meters and frequency-generating devices. It features a programmable interface ...
Manufactured by:National Turbine Corporation based inSyracuse, NEW YORK (USA)
Number of Stages : 1 through 10 Inlet Connection : 5” (127 mm) Flange, ASA 125# Drilling Outlet Connection : .5” (127 mm) Flange, ASA 125# Drilling Operating Speed : 3550 RPM Maximum Casing Pressure : 20 PSIG (1.41 kg/cm2) Seals (air) : Labyrinth Seals (gas) : Packing Gland (Special Seals Available) Bearings : Ball, 10-Year Minimum Life per AFBMA B-10 Standard (Made in U.S.A.) ...
Manufactured by:National Turbine Corporation based inSyracuse, NEW YORK (USA)
Filter Area: 74 Square Feet Filter Material: Singed Polyester - Other Materials Available Filter Design: Inverted Bag - Snap Bottom Shaker Mechanism: Manual Transverse - Standard Automatic Shaker - Optional Dust Bucket: 2.7 Cubic Foot "Feather-Lite" Corrosion-Proof, Molded High Density Polyurethane, Translucent To View Dirt Level. Steel 4.0 Cubic Foot Bucket - Optional Tank Construction: 12 Gauge ...
Manufactured by:National Turbine Corporation based inSyracuse, NEW YORK (USA)
We supply a wide range of parts to keep your vacuum system tank in top condition. Clean filter bags and air tight gaskets help assure peak performance from your vacuum ...