- Home
- Equipment
Refine by
Wei Environmental Equipment & Supplies
31 equipment items found
Manufactured by:Wastewater Engineers, Inc. based inOxford, MICHIGAN (USA)
The WE-MC-S solids filter & dewatering cart is a unit intended for the separation of gross solids from a waste stream. Typically the WE-MC-S unit is used in conjunction with a cone bottomed settling ...
Manufactured by:WEI SRL based inFiorenzuola, ITALY
is a patented product designed and made by WEI, composed by external body with inside tapered surface with expandable die tongs and centering pipe ring, rotating device mounted on bearing with lubrication ...
Manufactured by:Hua-Wei Machine Taiwan based inTaipei, TAIWAN
Cylinder for Heavy ...
Manufactured by:Hua-Wei Machine Taiwan based inTaipei, TAIWAN
Cylinder for Special Purpose- airport ground ...
Manufactured by:Sistag AG based inEschenbach, SWITZERLAND
Design: : Double flanged with lever and weight. Size: 65 - 400 mm. Material: EN-GJL-250/ EN-GJS-400-15. Flange Drilling: PN 10/16. Pressure Rating: up to 10 bar. Face to face dimension: EN 558-48, DIN 3202 F6. Main applications: Waste Water, ...
Manufactured by:Sistag AG based inEschenbach, SWITZERLAND
Body: Ductile Iron EN-GJS-400-15. Disc: Ductile Iron EN-GJS-400-15. Corrosion protection: Body inside with enamel finish and outside with a cermet and top coat RAL 5015.. Shaft: 1.4057. Bearing: 2.1090. Seal: EPDM. Actuation: Handwheel/Worm Gear. Nominal pressure: 10/16 bar. Flange drilling EN 1092 / ISO 7005. Face-to-face EN 558 / ISO 5752 part 14. Actuating flange: acc. to ISO 5211. Test acc. ...
Manufactured by:Wastewater Engineers, Inc. based inOxford, MICHIGAN (USA)
These units are engineered as a receiving sump for the fast evacuation of solids laden waste streams. These units are situated at the discharge end of the waste generating equipment to rapidly move the waste from the point of generation to a storage/collection area with a minimum of settling out of solids. Each unit is supplied with either an electric (Model S-222E) or air operated (Model S-222A) ...
Manufactured by:Wastewater Engineers, Inc. based inOxford, MICHIGAN (USA)
Streams that have a large amount of suspended solids often need to have those solids removed before treatment. A model ST-Tank is specifically designed to collect fluids and allow retention time for solids to settle. A solids filtration unit is designed to reside below the tank to collect the solids for disposal. The ST-Tanks have a 45 angle, and are available in several sizes in steel. Optional ...
Manufactured by:Wastewater Engineers, Inc. based inOxford, MICHIGAN (USA)
This equipment is intended to automatically adjust pH of an actively flowing stream to a pre-set pH ...
Manufactured by:Wastewater Engineers, Inc. based inOxford, MICHIGAN (USA)
The low profile Model #461 is intended for use as a dumping station for either floor scrubbing equipment or mop buckets. The unit features (2) shallow, screened baskets at the front of the unit. Theses screened baskets have 1/8” perforations, handgrips, and a 2’ depth to promote the accumulation of large debris from floor cleaning operations. The user simply dumps water to pass ...
Manufactured by:WEI SRL based inFiorenzuola, ITALY
WEI duplex pumps are designed reflecting an accurate selection of all components materials and machining, procedures to ensure remarkable. Simplicity of design and the components replacement’s ease allow utilization WEI pumps for water, oil, drilling mud, grouting and other services by combining various types, available in different materials, of fluid ends, liners, pistons, valves and ...
Manufactured by:Sistag AG based inEschenbach, SWITZERLAND
Valve operated by pneumatic cylinder. Supply pressure: 6–8 bar. Material acc. to data sheet 2.0.13. Corrosion protection acc. to data sheet 2.0.12. Flange drilling: PN 10/16 EN 1092 / ISO 7005. Face-to-face: EN 558 / ISO 5752 part 20. Nominal pressure PN: DN 50–300 10 bar. DN 350–400 6 bar. DN 450–600 4 bar. Operating pressure: Refer to table column OP. Test acc. EN ...
Manufactured by:Sistag AG based inEschenbach, SWITZERLAND
Materials acc. to data sheet 2.0.13. Corrosion protection acc. to data sheet 2.0.12. Flange drilling: PN 10/16 EN 1092 / ISO 7005. Face-to-face: EN 558 / ISO 5752 part 20. Nominal pressure PN: 16 bar. Operating pressure: Refer to table column OP. Test acc. EN 12266-1, rate A. ...
Manufactured by:Sistag AG based inEschenbach, SWITZERLAND
Material acc. to data sheet 2.0.13. Body and upper construction with epoxy powder coating. Stainless steel parts without coating. Flange drilling: PN 10/16 EN 1092 / ISO 7005. Face-to-face: EN 558 / ISO 5752 part 20. Nominal pressure PN: DN 50–200 10 bar. DN 250–300 6 bar. DN 350–400 4 bar. Operating pressure: Refer to table column OP. For dead-end installation we recommend to ...
Manufactured by:Wastewater Engineers, Inc. based inOxford, MICHIGAN (USA)
Wastewater Engineers, Inc. is pleased to announce a breakthrough in Oil Removal technology. Our LOR and OR series of oil coalescers will remove up to 97% of free oil on a single pass. Engineering and design breakthroughs have provided outstanding performance and dramatic improvements in fluid management. Your LOR Series Coalescer will help extend the life of your metalworking fluids by removing ...
Manufactured by:WEI SRL based inFiorenzuola, ITALY
WEI has been manufacturing Shale Shakers for more than 20 years. WEI Shale shaker 2’ x 3 ½ ’, the smallest in the range of WEI Shale shakers, has a shaking basket tilting, hydraulically controlled, to allow the operator to take into account mud specific weight, viscosity and type of cuttings to separate. Upper gates and lower open gate for Mud flow regulation are hydraulically ...
Manufactured by:Hua-Wei Machine Taiwan based inTaipei, TAIWAN
No Need to Remove Main Cutting Cylinder for Repair. Most Economical & Versatile Scrap Shear for a wide range of scrap types,. Lowest Electricity Consumption - Only 112 kW/hr for 1000T Model. Unique Screwed Assembly Structure of Blades & Blade Holders. Easy Loading / Feeding - Regular Excavators Applicable. Capable of Daily 24 hrs Operation for Steelmakers. Lowest Operation Cost - ...
Manufactured by:WEI SRL based inFiorenzuola, ITALY
WEI, is proudly able to manufacture special equipment as per Client’s needs, thanks to its multi-decade experience in the Oil & Gas sector. WEI has also a wide quality department where visual, liquid and magnetic controls are done on each piece. Every item, from the design to the manufacture is strictly conform to API ...
Manufactured by:WEI SRL based inFiorenzuola, ITALY
Stop Sand is a patented product made by WEI, in Italy, respecting API rules. It is a Liner Hanger with ports for placing Gravel Pack around screens. It is particulary designed for water wells where the aquifer is made up by loose sediments. It is mainly composed by three equipment: Liner Hanger, Gravel Setting Tool and Stop Sand Setting ...
Manufactured by:Hua-Wei Machine Taiwan based inTaipei, TAIWAN
Cylinder for Special Purpose - Culvert Pipes ...