- Home
- Equipment
Refine by
Aquatec Environmental Equipment & Supplies
33 equipment items found
Manufactured by:Aquatec VFL s.r.o. based inDubnica nad Váhom, SLOVAKIA
The shafts are produced by the plastic rotomoulding technology. To ensure high strength and static resistance, the shell of the tank is made of high-grade (PE) ...
Manufactured by:Aquatec Indonesia based inBandung Barat, INDONESIA
PT. Gani Arta Dwitunggal developed the fastest submersible cage in the world, first in South East Asia, able to submerge 15 meters underwater in under 5 minutes of operation time and can be refloated back to the surface in under 10 minutes. The cage submerges and refloats perfectly on its sides, always retaining perfect cylindrical net shape. This technology is developed to be used in typhoon ...
Manufactured by:Aquatec Indonesia based inBandung Barat, INDONESIA
PT. Gani Arta Dwitunggal produces pipe joint (bracket) for round HDPE cages using high capacity HDPE injection machine in order to make it into a compact one piece component including rail support. The result is a monoblock pipe joint (bracket) that has no connection or weak points, and therefore able to withstand rough sea ...
Manufactured by:Kelln Consulting Ltd. based inLumsden, SASKATCHEWAN (CANADA)
This 2-160 System will water 144 cow/calf pairs at 80' lift and 105 pairs at 200' of lift. The SWP-4000 is a positive displacement, continuous duty, low output submersible pump. This pump is best suited for low output wells of moderate depth and for applications with small daily output requirements. It has unique-tight power connectors and can be repaired It can be used with an optional pressure ...
Manufactured by:Kelln Consulting Ltd. based inLumsden, SASKATCHEWAN (CANADA)
The SWP-6000 is a positive displacement, continuous duty, low output submersible pump. This pump is best suited for low output wells of moderate depth and for applications with small daily output requirements. It has unique-tight power connectors and can be repaired It can be used with an optional pressure tank to create pressurized line system. The SWP-6000 offers more flow (up to 3gpm) than the ...
Manufactured by:Aquatec International, Inc. based inIrvine, CALIFORNIA (USA)
Aquatec’s 3-chamber and 5-chamber diaphragm pumps are used for a variety of transfer and recirculation applications including heat exchange for open or closed loop systems, feed water transfer, diluted chemicals transfer, and agitation. Most models are designed for intermittent duty, although some models are rated for continuous operation. Aquatec offers a variety of chemically compatible ...
Manufactured by:Aquatec International, Inc. based inIrvine, CALIFORNIA (USA)
Aquatec’s 3-chamber and 5-chamber diaphragm pumps are used for a variety of water delivery applications. Commonly used either to pressurize water from an atmospheric tank, to deliver purified water to a specific point of use, or simply to increase pressure when required. Most models are designed for intermittent duty, although some models are rated for continuous ...
Manufactured by:Aquatec VFL s.r.o. based inDubnica nad Váhom, SLOVAKIA
AT 30 to AT 300 oval wastewater treatment plants were invented to purify sewage water for blocks of houses, small village, parts of a village, accommodation properties, restaurants, recreational properties, manufacturing factories, industrial parks. After preliminary purification of industrial wastewater with organic pollution the plants serve as biological treatment for meat processing ...
Manufactured by:Aquatec VFL s.r.o. based inDubnica nad Váhom, SLOVAKIA
Low profile underground plastic tanks are 100% water resistant tank manufactured by the rotomoulding technology. Eliminating the possibility of groundwater occurence the tank is then assembled on the compacted sub-base of 25 cm of thickness including the overlapping the footprint of the tank by 20 cm. In 30 cm layers 4/8 gravel is used for backfilling the tank and make up the sub-base. ...
Manufactured by:Aquatec International, Inc. based inIrvine, CALIFORNIA (USA)
Aquatec’s original product, the 6800 Series and 8800 Series, are still the global standard in diaphragm booster pump technology, providing the highest quality and most reliable inlet pressure for efficient membrane utilization. Aquatec’s leading Innovation continues with the introduction of three new booster pump Series: the compact front-ported 3300 Series for applications where pump ...
Manufactured by:Aquatec International, Inc. based inIrvine, CALIFORNIA (USA)
Aquatec’s 3-chamber and 5-chamber diaphragm pumps are used for a variety of water delivery applications. Commonly used either to pressurize water from an atmospheric tank, to deliver purified water to a specific point of use, or simply to increase pressure when required. Most models are designed for intermittent duty, although some models are rated for continuous ...
Manufactured by:Aquatec-Maxcon Pty Ltd based inWulkuraka, AUSTRALIA
Disinfection systems treat water to inactivate pathogenic microorganisms and render the water completely safe for drinking and domestic use. The call for a higher log reduction for recycled water use has called for a combined multi system. UV systems are exceptionally useful in treating protozoan cysts such as giardia and cryptosporidium, while Ozone and Chorination are most effective against ...
Manufactured by:Aquatec - Produktions- und Vertriebs GmbH based inZeltweg, AUSTRIA
The Green activator is a system easy to install. You can simply attach it to your existing main water pipe from outside. The Green activator works without electricity and chemistry. It reduces the surface tension of water by permanent magnetism and rises the viscosity of water. Because of the changed water structure, deposits at pipes and nozzles diminish. The duration of life of irrigation ...
Manufactured by:Aquatec - Produktions- und Vertriebs GmbH based inZeltweg, AUSTRIA
The Print activator is a system easy to install. You can simply attach it to your existing main water pipe from outside. The Print activator works without electricity and chemistry. It reduces the surface tension of water by permanent magnetism and rises the viscosity of water. Because of the changed water structure, deposits at pipes and rollers diminish. The duration of life of printing ...
Manufactured by:Aquatec-Maxcon Pty Ltd based inWulkuraka, AUSTRALIA
Grit particles which are smaller than the aperture of the screen will pass through and cause abrasive problems on pipes, pumps and sludge handling equipment. The grit particles can settle in channels, aeration tank floors and sludge digestors which can create maintenance problems. Therefore, a grit removal system is required for most sewage treatment ...
Manufactured by:Aquatec-Maxcon Pty Ltd based inWulkuraka, AUSTRALIA
Aquatec Maxcon supplies fine bubble membrane type plate diffusers, membrane and ceramic type disc diffusers, as well as tubular diffusers, all of which provide the highest available efficiencies. Integral mixing systems are also offered for optimised ...
Manufactured by:Aquatec Indonesia based inBandung Barat, INDONESIA
PT. Gani Arta Dwitunggal layered its HDPE pipe with 1-2mm of anti-UV and Antibiofouling layer. Antibiofouling prevents fouling on HDPE pipe, reducing maintenance efforts and costs associated with biofouling management. Anti-UV protects HDPE pipe from intense UV rays and greatly increase product lifetime. This technology is environmentally friendly and only available with ...
Manufactured by:Aquatec Indonesia based inBandung Barat, INDONESIA
PT. Gani Arta Dwitunggal developed round HDPE cages that can be used in offshore waters with waves up to 4 meters high or more. In order to achieve such engineering feat, Aquatec implements improved butt fusion technology, which is a butt fusion connection with the thickness up to twice the thickness of the pipe, resulting in much stronger connection than the pipe itself. This technology ...
Manufactured by:Aquatec Indonesia based inBandung Barat, INDONESIA
One of the first Aquatec product is the Square Flexi Type Cage, designed to be flexible and durable even in 2 meters wave. The main feature of the cage is its knockdown system, where the cage is composed of separate components that can be assembled using stainless steel grade 316 bolts with simple tools, and can be dismantled when needed. This makes the cost of transportation cost very efficient, ...
Manufactured by:Aquatec VFL s.r.o. based inDubnica nad Váhom, SLOVAKIA
Polypropylene (PP) plastic sheets are produced on the extrusion line of plastic for plastic sheets. The main areas of application are: welding of tanks and other objects, formwork lining of different kinds and ...