ARA Environmental Industry Equipment
-
Manufactured by ARA Instrumentsbased in USA
The ARA Cassette Separator is designed to easily open 47mm Filter Cassettes. This tool enables easy and efficient access to the filter ...
-
Manufactured by Antenna Research Associates, Inc. (ARA)based in USA
The ARA-3240 Series hosts extremely rugged and portable high-gain UHF SATCOM antennas that are available in full and compact sizes. These antennas are ideal for tactical command posts and temporary fixed site applications. The compact version is ideal for operation in high winds. The right-hand circular polarized (RHCP) antenna is designed to operate from 240 to 318 MHz at 200 Watts CW. These ...
-
Manufactured by Antenna Research Associates, Inc. (ARA)based in USA
ARA has a wide variety of Prime-Focus, Offset, Gregorian, and Cassegrain feeds and antennas for multi-band applications. These multiband feeds are designed to minimize phase center movement. This helps to better focus the feed within the reflector for optimal gain, providing the highest possible EIRP and ...
-
Manufactured by Antenna Research Associates, Inc. (ARA)based in USA
ARA’s series of log-periodic antenna arrays supports a wide variety of applications requiring high-power transmission. These arrays are designed to meet strict beamwidth, gain, and power handling requirements. The log periodic design produces very broadband characteristics and a unidirectional radiation pattern. These antennas can be used to make accurate electric field strength ...
-
Manufactured by ARA Instrumentsbased in USA
The Low Flow Research Sampler is a portable, rapidly deployable, battery-powered particulate sampling device. It utilizes FRM-style impactors for improved accuracy at 6 LPM and requires no grease or oil for low maintenance use. The compact-sized sampler can be configured to collect 24-hour TSP, PM10, or PM2.5 filter samples and can simultaneously measure and log all real-time sampling parameters, ...
-
Manufactured by Antenna Research Associates, Inc. (ARA)based in USA
The Vehicular Spectrum Operations Series of antennas are broadband monopoles designed to operate over a wide frequency range to support passive and active applications with low VSWR. These antennas exhibit exceptional gain in an omni-directional pattern. It is designed with compliance to the strictest military specifications, to include MIL-STD-801F environmental procedures. This series of ...
-
Manufactured by ION Science Ltd.based in UNITED KINGDOM
ARA O2 single gas detector is a cost effective personal detector with 24 months of continuous operation. This wearable, single gas detector has only one button to make use simple and alerts workers when health levels exceed set safety ...
-
Manufactured by ARA Instrumentsbased in USA
The RTP Profiler uses a Plantower light-scattering sensor to provide real-time data for two size ranges approximating PM10 and PM2.5. It is a low-cost sensor that is intended to show trends during the sample run, supplementing the filter data. The ARA N-FRM Sampler logs 5-minute averages during the filter sample collection. Data is stored and easily extracted via USB Flash Drive. The conversion ...
-
Manufactured by ARA Instrumentsbased in USA
The ARA N-FRM Sampler is a portable, battery-powered particulate sampler that establishes a new class of air sampler we call “Near FRM”. While it is not a certified US EPA Federal Reference Method sampler, the N-FRM Sampler delivers FRM accuracy at a fraction of the cost. It is the first of its kind to complete 24-hour sampling periods utilizing only battery-power at 16.7 ...
-
Manufactured by ARA Instrumentsbased in USA
The Cr6+ Adaptor allows users to modify the N-FRM Sampler for Hexavalent Chromium sampling. The N-FRM Sampler’s flow rate can easily be adjusted to 15 LPM for standard sampling. Filter Holder is not ...
-
Manufactured by ARA Instrumentsbased in USA
The Wind Sensor is a perfect addition to the ARA N-FRM Sampler for users interested in supplementing particulate sampling with wind speed and directional air sampling. In directional sampling mode the ARA N-FRM Sampler will only run when winds are blowing in a user-defined direction. Extension arm is included to raise sensor above the ...
-
Manufactured by ARA Instrumentsbased in USA
The FTS Calibrator accurately measures volumetric air flow, barometric pressure, and ambient temperature. Using a venturi-based flow element, the FTS Calibrator efficiently calibrates and audits ambient air samplers and industrial hygiene samplers. Its easy-to-use interface allows for simple programming and operation. Air flow is calculated and displayed at both ambient conditions and ...
-
Manufactured by Antenna Research Associates, Inc. (ARA)based in USA
The ARA-1220 and ARA-1220-101 antennas are wide band, omni- directional, vehicular communications antennas. The ARA-1220 and ARA-1220-101 are designed for use in the most demanding and harsh tactical conditions. The lightweight, low-profile construction combined with a standard NATO 4-Bolt mounting pattern allows it to be easily integrated into military vehicles and most antenna mast ...
-
Manufactured by Antenna Research Associates, Inc. (ARA)based in USA
Understanding weather patterns is an important tool for public safety and agriculture to ensure that the proper steps are being taken before storms. Properly monitoring weather patterns helps with preparation to limit damage and administer the proper size of response needed during and after major weather events. This is critical for public ...
-
Manufactured by ION Science Ltd.based in UNITED KINGDOM
ARA SO2 single gas detector is a cost effective personal detector with 24 months of continuous operation. This wearable, single gas detector has only one button to make use simple and alerts workers when health levels exceed set safety ...
-
Manufactured by ARA Instrumentsbased in USA
The aluminum filter holder is precisely manufactured for a tight seal and no contamination of the filter media. The filter holder is designed to use common EPA specified 47mm cassettes for PM2.5 sampling. PN 510-000. ...
-
Manufactured by Antenna Research Associates, Inc. (ARA)based in USA
ARA has a wide variety of Prime-Focus, Offset, Gregorian, and Cassegrain feeds and antennas for multiband applications. These multiband feeds are designed to minimize phase center movement. This helps to better focus the feed within the reflector for optimal gain, providing the highest possible EIRP and G/T. ARA designs, simulates, manufacturers, and tests all feed solutions in-house which can ...
-
Manufactured by ION Science Ltd.based in UNITED KINGDOM
The Carbon Monoxide (CO) single gas detector is a cost effective personal detector with 24 months of continuous operation. This wearable & personal CO gas detector has only one button to make use simple and alerts workers when Carbon Monoxide exceeds set safety ...
-
Manufactured by ARA Instrumentsbased in USA
The ARA omnidirectional PM10 Inlet is a compact version of the EPA prescribed Reference Method Inlet. It features a screened inlet, wind deflector, and precision PM10 inertial separator (impactor) with moisture trap. The PM10 Inlet is designed to operate at 1 cubic meter per hour (16.67 liters per minute). The inlet can be used alone for PM10 sampling or in combination with the ARA VIS-A sharp ...
-
Manufactured by ION Science Ltd.based in UNITED KINGDOM
Keeping Workers Safe and you Compliant! Industrial sites in the Oil & Gas, Petrochemical and Offshore sectors can be volatile places if the right safety measures are not in place. You need reliable and ATEX certified gas detectors to keep the workforce safe. Hydrogen Sulfide (H2S) may desensitise and render the body unconscious in no time at high concentrations, therefore, reliable personal ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you