- Home
- Equipment
Refine by
Arjay Environmental Equipment & Supplies
26 equipment items found
Manufactured by:Arjay Engineering based inOakville, ONTARIO (CANADA)
Pipe monitoring for dry conditions to protect pumps and equipment. Combining the technology of capacitance with unique sensor designs provide non-intrusive monitors for liquid handling systems. The result is a low cost and low maintenance system to determine the presence or absence of product in a pipe or pump. The 2852-DPM sensor monitors a cross sectional area of the pipe and locks in on the ...
Manufactured by:Arjay Engineering based inOakville, ONTARIO (CANADA)
Reliable level alarm and control of liquids and solids. The sensing probe continuously monitors the level changes in a vessel to alarm at user defined set points. It is typically used to control pumps and valves, alarm of high or low product conditions, or alert to potential overflow and dry conditions. The 2852-LS sensing probe monitors the capacitance field around the probe. As the level of ...
Manufactured by:Arjay Engineering based inOakville, ONTARIO (CANADA)
Reliable monitoring of process conditions and concentration. The sensing probe continuously monitors the dielectric stability of the product. Changes in dielectric can be tagged to product quality changes, moisture content, emulsions, concentrations and product phase changes. Typical applications include liquid blending, moisture content of solids, upset product intrusion or separation, and ...
Manufactured by:Arjay Engineering based inOakville, ONTARIO (CANADA)
The 4100-LEV provides continuous level monitoring of liquids and bulk solids. The 4100-LEV unique level system provides complete flexibility for monitoring one or more tanks in one complete package. The 4100-LEV sensing probe monitors the capacitance field between the probe and it’s concentric shield of the tank wall. As the level of product increases, the probe capacitance changes. This ...
Manufactured by:Arjay Engineering based inOakville, ONTARIO (CANADA)
Reliable monitoring of foaming conditions in process applications. Over 40 years of capactiance experience stands behind the 2852-FCM Foam Control Monitor. The sensing probe is tuned to the normal operating conditions of the gaseous or air phase in your process. The intrusion of foam around the probe will cause a capacitance change that is monitored by the remote controller. Variations in foam ...
Manufactured by:Arjay Engineering based inOakville, ONTARIO (CANADA)
The 2852-LT Remote Mounted Level Transmitter provides reliable level monitoring of liquids and solids for measurement and control. The unit continuously monitors the liquid or solids level in a tank, stand-pipe or containment. Outputs include analog, digital, and relay control for interface to alarms, valves, pumps and other process monitoring equipment. The 2852-LT sensing probe monitors the ...
Manufactured by:Arjay Engineering based inOakville, ONTARIO (CANADA)
Continuous monitoring of separated oil thickness on a water surface. The 4100-HCF monitors a floating sensor on the water surface to indicate the thickness of separated oil. An LCD display of the thickness, analog output and relay alarms are standard. The 4100-HCF float sensor monitors the capacitance field of the water surface. As the oil accumulates on the surface, the sensor capacitance ...
Manufactured by:Arjay Engineering based inOakville, ONTARIO (CANADA)
The 2852-OWS Remote Mounted Oil Alarm provides reliable interface monitoring of oil/water separators, sump pits and containments for pump control and alarm. The sensing probe continuously monitors for the oil/water interface in a water filled sump or separator. It is typically used to control pumps, operate valves, or activate alarms. The 2852-OWS sensing probe monitors the capacitance field ...
Manufactured by:Arjay Engineering based inOakville, ONTARIO (CANADA)
The 2882-OWS Probe Mounted Oil Alarm provides reliable monitoring for the oil/water interface in separators. The probe, once designed, is inserted into the separator or sump to the depth of desired oil accumulation. The electronics is calibrated to the capacitance field around the probe. As oil accumulates and effectively displaces the water, the capacitance change around the probe tip is ...
Manufactured by:Arjay Engineering based inOakville, ONTARIO (CANADA)
The FluoroCheck II is a benchtop and transportable unit for discrete sample measurements of ppm hydrocarbons in water. Direct water samples for screening or an EPA approved hexane oil extraction method may be ...
Manufactured by:Arjay Engineering based inOakville, ONTARIO (CANADA)
The HydroSense 4410-LMP Oil in Water Analyser offers continuous on-line monitoring for ppm concentrations of petroleum oils in effluent and produced water without chemicals or lag time. A non-contacting sensor design minimizes system maintenance. The 4410-LMP is the engineered combination of three unique ...
Manufactured by:Arjay Engineering based inOakville, ONTARIO (CANADA)
The HydroSense 2410 PPM Oil Water Analyzer continuously monitors the water sample flowing through it for ppm concentrations of hydrocarbons. The display, signal output, and alarm can be configured within the 0-1000 ppm range. On-line monitoring for ppm concentrations of petroleum oils in effluent and produced ...
Manufactured by:Arjay Engineering based inOakville, ONTARIO (CANADA)
Continuous profiling of oil/water interface and emulsions in tanks. Multiple capacitance probes staggered in an oil/water separator will provide a profile of the emulsion location and thickness. The 4100-PRO uses multiple sensing probes to measure the capacitance field at distinct points within the tank. The resulting profile can be used to track the vertical location of an interface/rag layer ...
Manufactured by:Arjay Engineering based inOakville, ONTARIO (CANADA)
Continuous monitoring for % concentration of water in oil emulsions. The 4100-OWM is used for monitoring as the water phase changes to oil in a tank or pipe. A probe inserted into a tank or pipe measures the capacitance field. This is ideal for general oil-in-water testing and other liquid phase changes in a ...
Manufactured by:Arjay Engineering based inOakville, ONTARIO (CANADA)
Reliable interface monitoring for alarm between two liquids. The sensing probe continuously monitors the liquid in a vessel and will alarm when the interface of a different dielectric liquid crosses the active probe. Typical applications include oil/water interface in pipes and separators, water accumulation in fuel tank bottoms, and product phase changes in process piping streams. The 2852-IFA ...
Manufactured by:Arjay Engineering based inOakville, ONTARIO (CANADA)
The HydroSense 4420-OCM PPM Oil Content Meter offers a low-cost approach to monitoring ppm concentrations of emulsified free oils in clean water. The 4420-OCM continuously monitors a clean water sample for oil leaks. The display, signal output, and alarm can be configured within the 0-250 ppm range. On-line alarm for oil presence in filtered effluent and cooling ...
Manufactured by:Arjay Engineering based inOakville, ONTARIO (CANADA)
Reliable monitoring of oil/water interface and emulsions. The sensing probe continuously monitors the capacitance of the inserted probe. As the interface or emulsion layer (rag layer) crosses over the probe, a proportional 4-20 mA output is provided. Typical applications include oil water separators, oil/water knock-out tanks, treater trains and decanting ...
Manufactured by:Arjay Engineering based inOakville, ONTARIO (CANADA)
For parking garages, arenas, warehouses, maintenance facilities and more. Arjay Engineering is proud to be an industry-leading supplier of industrial gas detectors for a wide variety of industries. Our extensive line of gas monitoring equipment offers quality products for all types of applications. With over 40 years of experience in the industry, it’s our goal to keep you and your ...
Manufactured by:Arjay Engineering based inOakville, ONTARIO (CANADA)
Non-intrusive monitoring of chutes and hoppers for bulk material detection. Combining the technology of capacitance with unique sensor designs provide non-intrusive monitors for bulk solids handling systems. The result is a low cost and low maintenance system to determine the presence or absence of product in a pipe, chute, or other vessel. Plugged Chute Detectors monitor a chute or vessel using ...
Manufactured by:Arjay Engineering based inOakville, ONTARIO (CANADA)
Reliable level alarm and control of liquids and solids. As a liquid or solid rises or lowers around the probe, the capacitance field changes. This is monitored and used to control the two on-board relays. Each relay includes full differential control to allow the relay to activate and de-activate between two distinct at user determined points on the probe. This can be used for pump and valve ...