- Home
- Equipment
Refine by
Auma Environmental Equipment & Supplies
12 equipment items found
Manufactured by:Automated Valve & Control based inLa Porte, TEXAS (USA)
AUMA is the world's largest manufacturer of Electric Motor Operators, with a new state of the art manufacturing facility in Canonsburg, Pennsylvania, backed up with three large facilities in Germany. The product line is widely known and respected because of 50- plus years of German engineering. they have obtained electrical approvals from FM, NEMA, ATEX (formally Cenelec) and Russia's GOST. A ...
Manufactured by:Auma Riester GmbH & Co. KG based inMuellheim, GERMANY
AC actuator controls are your perfect solution if the application requires self-adapting control functions, data logging, a configurable interface or if valve and actuator are to be integrated into a Plant Asset Management System due to advanced diagnostic ...
Manufactured by:Auma Riester GmbH & Co. KG based inMuellheim, GERMANY
SA multi-turn actuators are rated for open-close duty and positioning duty (classes A and B) / (short-time duty S2 - 15 min). Special sizing for longer running times is available for the S2 - 30 min ...
Manufactured by:Auma Riester GmbH & Co. KG based inMuellheim, GERMANY
With SARV .2 multi-turn actuators for modulating duty paired with ACV 01.2 actuator controls, the proven SA/SAR range is enhanced by variable speed models. AUMA is spearheading market technology by offering a wide speed control ratio of 1:10. SARV multi-turn actuators are rated for modulating duty (class C) S4 - 25 %. Special versions for S4 - 50 % are also ...
Manufactured by:Auma Riester GmbH & Co. KG based inMuellheim, GERMANY
High pressure impacts in pipelines demand multi-turn actuators supplying high torques. When combining multi-turn actuators with GHT multi-turn gearboxes, the torque range can be extended to 120,000 Nm. Torque range: to 120000 ...
Manufactured by:Auma Riester GmbH & Co. KG based inMuellheim, GERMANY
If the drive shaft is to be positioned at a certain angle to the output drive shaft, combinations of the multi-turn actuators SA with AUMA spur gearboxes GST are used. The output torque can be increased many ...
Manufactured by:Auma Riester GmbH & Co. KG based inMuellheim, GERMANY
With SAV .2 multi-turn actuators for open-close duty paired with ACV 01.2 actuator controls, the proven AUMA SA/SAR range is enhanced by variable speed models. AUMA is spearheading market technology by offering a wide speed control ratio of ...
Manufactured by:Auma Riester GmbH & Co. KG based inMuellheim, GERMANY
If the effective direction must be displaced by 90°, GK bevel gearboxes are used. The output torque can be considerably multiplied. ...
Manufactured by:Auma Riester GmbH & Co. KG based inMuellheim, GERMANY
Explosion-proof devices must be used in plants where potentially explosive atmospheres are likely to occur. These devices are designed so that they will not act as an ignition source. They neither generate ignition sparks, nor hot surface temperatures. Certification is performed in close collaboration with national and international certification bodies. For multi-turn actuators SAEx/SAREx 07.2 ...
Manufactured by:Auma Riester GmbH & Co. KG based inMuellheim, GERMANY
AUMA offers sophisticated control for premium safety requirements with AC 01.2-SIL or ACExC 01.2-SIL actuators controls. SA .2 and SQ .2 actuators combined with these actuator controls can be deployed in safety-related system systems up to SIL 3. AC 01.2 actuator controls in SIL version are equipped with an additional SIL module designed for the execution of safety functions. ...
Manufactured by:Auma Riester GmbH & Co. KG based inMuellheim, GERMANY
SAR multi-turn actuators are rated for modulating duty (class C) S4 - 25 %. Special versions for S4 - 50 % and S5 - 25 % are also available. The actuators can be combined with different actuator controls: From simple OPEN-CLOSE actuator controls to the micro-controlled version with logging of operating data or fieldbus interface. ...
Manufactured by:Auma Riester GmbH & Co. KG based inMuellheim, GERMANY
The use of a frequency converter specially conceived for the actuator deployment offers many advantages. Besides the variable speed, the insensitivity to voltage and frequency variations, the lack of current increase during motor start-up as well as the valve protection by soft approaching of the end positions should be ...