- Home
- Equipment
Refine by
Cla Val Environmental Equipment & Supplies
193 equipment items found
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
Cla-Val Models 98-06 and 698-06 Water Saving Valves use two downstream set points to achieve optimum system pressure; i.e. the capability delivering only the pressure that is needed to meet current ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
Cla-Val 39 Series Anti-Slam Air Release and Vacuum Breaker Valves protect piping and equipment against water hammer, surge conditions and vacuum formation during filling or draining operations. Often installed adjacent to pumps or at high points in a pipeline, they perform the following four functions in potable water, raw water and sewage ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
The Cla-Val Model 100G-UT is an electrically actuated hydraulic on/off deluge valve with fail last position pilot designed for use in multiple applications. The 100G-UT can be actuated locally by relieving cover pressure through our EDVR (Emergency Deluge Valve Release) or remotely via ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
The Cla-Val PC-22D provides control of the pump and pump control valve, preventing surges in the system when the pump starts or stops. It consists of a pre-wired electrical control panel employing a programmable valve controller to sequence the pump and pump control valve during all modes of operation. The programmable valve controller, which is housed in a NEMA 4X rated enclosure, provides ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
The Cla-Val Model 60-BT Pump Control Valve is a pilot-operated valve designed for installation on the discharge of booster pumps to eliminate pipeline surges caused by the starting and stopping of the ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
The Cla-Val Model 100G-UO-FS1 is a Single Fail Safe electrically actuated on/off deluge valve designed for use in multiple applications. The 100G-UO-FS1 can be actuated locally by relieving cover pressure through our EDVR (Emergency Deluge Valve Release) or remotely via solenoid. The 100G-UO-FS1 will need to be reset locally be reengaging the latching ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
The Cla-Val Model 354GF Valve is used to control fuel pressure delivered into an aircraft through an underwing refueling nozzle. The 354GF is intended for use on various forms of aircraft refueling ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
One of the most commonly used valves in magazine sprinkling systems, the Cla-Val Navy Standard Valve is built to meet the requirements of MIL-V 17501 ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
Cla-Val Series 413-01 Valve is used to control above ground and underground storage tanks. This valve is available in a variety of configurations, sizes and ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
The Cla-Val Model CDHS-34 Electronic Actuated Differential Pressure Pilot Control provides remote set-point adjustment and accurate differential pressure control for the rate of flow control on Cla-Val 340 Series Control Valves. Remote set-point command signals can be from any SCADA-type control system using analog 4-20 mA signal, by contact closure for cc/ccw rotation or through Modbus RTU. A ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
The Cla-Val Model 90M Automatic Pressure Reducing Valve is used in shipboard piping systems, wherever pressure reducing is required. Typical applications include sanitary flushing and evaporator cooling systems. ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
The Cla-Val Model 81-18 Check Valve is a hydraulically operated No-Slam Check Valve. This valve opens when the pressure at the inlet exceeds the discharge pressure. A gradual rate of opening prevents sudden opening surges. When a pressure reversal occurs the higher downstream pressure is applied to the cover chamber through the control tube lines, and the valve closes drip ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
The Cla-Val 100PM-4B Automatic Control Valve is used in Dry and Wet Type Magazine Sprinkling ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
The Cla-Val Model 50-48 Back Pressure and Check Valve is a hydraulically-operated, diaphragm actuated, globe or angle pattern valve. It is available in various materials and full range of sizes. It consists of three major components: body, diaphragm assembly and cover. The diaphragm assembly is the only moving part. The rugged simplicity of design and packless construction assure a long life ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
The Cla-Val Model 100G-UC is a hydraulically actuated on/off latching deluge valve designed for use in multiple applications. The 100G-UC can be actuated locally by relieving cover pressure through our EDVR (Emergency Deluge Valve Release) or remotely based on customer design. The 100G-UC will need to be reset locally by reengaging the latching ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
The 100-01KO Hytrol is the main valve used in Cla-Val Automatic Control Valves for high differential applications requiring remote control, pressure regulation, solenoid operation, rate of flow control or liquid level control. The Anti-Cavitation Trim components can be retrofitted to existing valves if the application indicates an appropriate ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
The Cla-Val Model 90-05 Pressure Reducing Valve is a full port valve that automatically reduces a higher inlet pressure to a steady lower downstream pressure, regardless of changing flow rate and/or varying inlet pressure. This valve is an accurate, pilot-operated regulator capable of holding downstream pressure to a pre-determined limit. When downstream pressure exceeds the pressure setting of ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
The 50M-5 is a remote sensing pressure relief valve specifically designed for use in marine fuel oil transfer system aboard surface marine vessels. Available in globe pattern, sizes 1-1/2” through 8,” and 8” for angle pattern valves. Built to meet the requirements of MIL-F20042, Class 150 and 250 for flanged and MIL-F1183 for union-style ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
The Cla-Val Model 134-61 Seawater Service Solenoid Control Valve is an on-off control valve which either opens or closes upon receiving an electrical signal to the solenoid pilot ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
The Cla-Val 2 ½” Model 90-ADJ-PRV-25 features a Forged Brass finish body with Forgeline Bonnet and Seat Assembly. The system water pressure is controlled by adjusting the flow restriction, however, if full flow is required the restriction can be overridden.This heavy-duty design is factory tested to 300 psi (2070 KPa). It is also UL/ULC Listed. A brass body is standard but can be ...