- Home
- Equipment
Refine by
Dakota Environmental Equipment & Supplies
29 equipment items found
Distributed by:Multi-Purpose Primary Tillage based inUpper Sandusky, OHIO (USA)
Undercoating; 22,500 lb. Capacity axle with outboard mounted hubs and drums; Anti-Lock Brakes with Automatic Slack Adjusters; Two speed 50,000 lb Landing Legs; I.C.C. standard sealed beam type Lighting; I.C.C. Reflective tape, Mud Flaps, Ladder and Catwalk (front & rear); 67' Height & 96' Width. All Trailers also come equipped with Shur-Lok roll Tarp. ...
Manufactured by:Dakota Ultrasonics based inScotts Valley, CALIFORNIA (USA)
The MX-1 will hold a single velocity, making it the perfect choice applications where only one material is being tested day after day. With the preset velocity in the gauge, you simply turn it on and go to work. The tool’s backlit display is easy to read, even in dim light conditions, and the unit operates for up to 200 hours on a single set of AA batteries. The MX-1 comes complete, ready ...
Manufactured by:Dakota Instruments, Inc. based inOrangeburg, NEW YORK (USA)
PTFE Needle Valves with Aluminum shells and Brass bushings are constructed of PTFE and PEEK. External, non-fluid contacting parts are anodized Aluminum. Valves are designed for lab and industrial corrosive gas, liquids, and high purity regulation. They can also be used as shut-off valves. ...
Manufactured by:Dakota Instruments, Inc. based inOrangeburg, NEW YORK (USA)
Pulse width modulated Driver Modules regulate the power supplied to the Proportionating Electromagnetic Valves based on a reference signal. Set-point signals, 0-5 Vdc or 4-20 mA, input are employed to control the output pulse width modulated voltage at a fixed frequency (≈30KHz) and amplitude. Incoming power to the valve coil is applied and discontinued for predetermined periods of time by ...
Manufactured by:Dakota Instruments, Inc. based inOrangeburg, NEW YORK (USA)
Compact and self-contained, Dakota's Mass Flow controllers are designed to indicate and control flow rates of gases. GC mass flow controllers combine the characteristics and accuracy of conventional mass flow devices at low costs previously unattainable. Available in flow ranges from 10 mL/min to 1000L/min relative to Nitrogen, each model is calibrated on-site with numerous gas selections, ...
Manufactured by:Dakota Ultrasonics based inScotts Valley, CALIFORNIA (USA)
Sizing Toolkits: DAC, AWS, TCG, DGS.Exception visibility in sunlight (AMOLED) color VGA display (320×240 pixels).P.R.F. – 8 to 333 Hz, adjustable.Screen Refresh Rate: Adjustable 60 & 120.Detection: Z-Cross, Flank & Peak. ...
Manufactured by:Dakota Ultrasonics based inScotts Valley, CALIFORNIA (USA)
Pulser Voltage: 100 – 200 volt square wave. Gain: 0 – 110 dB range. Filters: Wide, 1, 2, 5 & 10 MHz. Sizing Toolkits: DAC, AWS, TCG, DGS. Blanview sunlight viewable QVGA display (320×240 pixels). P.R.F. – 8Hz to 2kHz, adjustable. Screen Refresh Rate: 60 Hz. Detection Modes: Z-Cross, Flank & ...
Manufactured by:Dakota Ultrasonics based inScotts Valley, CALIFORNIA (USA)
The Dakota FX70 Flaw Detector is a versatile, handheld device integrating advanced flaw detection with material thickness measurement capabilities. It functions both as a thickness gauge, capable of measuring coatings and material thickness, and a flaw detector, identifying the size and position of flaws, differentiating between flaw types in various materials and welded joints. User-definable ...
Manufactured by:Dakota Ultrasonics based inScotts Valley, CALIFORNIA (USA)
The Dakota ZX Corrosion Thickness Gauges are basic thickness gauges making them affordable tools that require no special training to operate. The ZX Corrosion Thickness Gauge is available in four different models. Each thickness gauge provides the inspector with increasing functionality - from the entry level Dakota ZX1 Thickness Gauge, to the top of the range Dakota ZX6-DL Corrosion Thickness ...
Manufactured by:Dakota Ultrasonics based inScotts Valley, CALIFORNIA (USA)
The Dakota PMX High Penetration Precision Thickness Gauge (HPX DL+) is engineered for measuring materials that are challenging for sound penetration due to inconsistent material properties, grain structure, and substantial thickness. This gauge provides high voltage pulser options and filters that are specifically calibrated for low-frequency transducers ranging from 500 kHz to 10 MHz. Compatible ...
Manufactured by:Dakota Instruments, Inc. based inOrangeburg, NEW YORK (USA)
Digi-Sense's handheld or mounted Data Logging Anemometer takes and records accurate air velocity measurements in seven user-selectable units. For graphing and analysis, simply download data to a PC. Recorded data can be used to enhance your environment's comfort and safety. ...
Manufactured by:MPEsupplies.com by MPE based inSpringdale, ARKANSAS (USA)
Sewer Camera with Free Locator, Self-Leveling Sewer Camera 512Hz Sonde Meter Counter, Built-in Microphone & Speaker, 1080P 10" IPS Monitor, IP68 Waterproof Pipe Inspection Camera with ...
Manufactured by:Dakota Ultrasonics based inScotts Valley, CALIFORNIA (USA)
The time-based B-Scan feature of the PR-8V displays a cross section of the opposite surface, allowing engine builders the ability to see the contour of the back surface in cylinders while scanning.Use the Multi-Mode (Echo-Echo mode) feature to measure chassis tubing with or without paint and coatings. Built-in automatic gain control and selectable low, medium, and high gain settings offer the ...
Manufactured by:Dakota Ultrasonics based inScotts Valley, CALIFORNIA (USA)
Dakota's PZX1 and PZX1-DL Precision Thickness Gauges are designed for accurate measurement of thin substrate materials. Incorporating ThruPaint™ technology, these gauges provide precise readings without the need to remove Surface coatings. Commonly used in applications such as precision machining, stamping, aircraft, automotive, and thin plastics, the gauges feature a one-point calibration ...
Manufactured by:Dakota Ultrasonics based inScotts Valley, CALIFORNIA (USA)
The MX-2 is ideal for the person that tests a few different materials regularly. The MX-2 contains 8 velocities of common materials and two velocities that the user can set using a simple sofware program. The tool’s backlit display is easy to read, even in dim light, and the unit operates for up to 200 hours on a single set of batteries. The MX-2 comes complete, ready to use, and is ...
Manufactured by:Dakota Ultrasonics based inScotts Valley, CALIFORNIA (USA)
With the hand held MX-3 Ultrasonic micrometer, you can make reliable measurements or scan a length of material for the thinnest point. The tool’s backlit display is easy to read, even in dim light, and the unit operates for up to 200 hours on a single set of batteries. The MX-3 comes complete, ready to use and is protected by Dakota Ultrasonics 5 year limited ...
Manufactured by:Dakota Ultrasonics based inScotts Valley, CALIFORNIA (USA)
The PR-82 sonic tester has been modified for the automotive industry. This gauge is commonly used for measuring the thickness of cylinder walls, head ports, decks, tubing, body panals, and windshields. It also has the ability to scan the length of a part to find the the minimum thickness.The PR-82 is back-lit and the unit operates for up to 200 hours on a single set of batteries. It is protected ...
Manufactured by:Dakota Instruments, Inc. based inOrangeburg, NEW YORK (USA)
Available for multiple flow rates, this Acrylic Flow Meter has a Dual Direct Reading Scale with yellow backing for easy viewing of Water flow values. Viton® Seals, 1/8" FNPT and Brass End fittings are standard. The float material varies based on the metering range (316 SS, Carboloy, Glass). Available for metering flow rates from 20 mL/min (0.3 GPH) to 1400 mL/min (22 GPH). ...
Manufactured by:Dakota Instruments, Inc. based inOrangeburg, NEW YORK (USA)
Available for multiple flow rates, this Acrylic Flow Meter has a Dual Direct Reading Scale with yellow backing for easy viewing of Nitrogen flow values. Viton® Seals, 1/8" FNPT and Brass End fittings are standard. The float material varies based on the metering range (316 SS, Carboloy, Glass). Available for metering flow rates from 1.3 LPM (2.75 SCFH) to 45 LPM (100 SCFH). ...
Manufactured by:Dakota Pump Inc. based inMitchell, SOUTH DAKOTA (USA)
Dakota Pump is a Leader in the Packaged Water Booster Industry; Using our advantage as a single source supplier along with the use of nationally recognized manufacturers of pumps and major components, our water booster stations are an excellent choice for both the Design Engineer and the end ...