- Home
- Equipment
Refine by
Dilution Environmental Equipment & Supplies
11 equipment items found
Premium
Manufactured by:Plymovent Group BV based inAlkmaar, NETHERLANDS
The SCS-Diluter is a stand-alone general filtration system, developed to reduce and control the background concentration of welding fumes in a workshop. The SCS-Diluter is a smart general fume extraction and air filtration solution without ductwork that works as a local exhaust ventilation system. In some cases source fume extraction and hoods are not an option, for example if metalwork pieces ...
Premium
Manufactured by:Plymovent Group BV based inAlkmaar, NETHERLANDS
The MDB-Diluter Pro Connect is a standalone general welding fume filtration system. MDB-Diluter systems are designed for intensive welding activities with heavy dust load. The unit prevents accumulation of welding fume beyond the legal limits by continuous filtration and dilution of polluted air. The blue haze of welding fumes, caused by the risen fumes that concentrate between four and six ...
Premium
Manufactured by:Plymovent Group BV based inAlkmaar, NETHERLANDS
The MDB-Diluter Pro is a standalone general welding fume filtration system. MDB-Diluter systems are designed for intensive welding activities with heavy dust load. The unit prevents accumulation of welding fume beyond the legal limits by continuous filtration and dilution of polluted air, working as an efficient air purification system. The blue haze of welding fumes, caused by the risen fumes ...
Manufactured by:Dosatron International based inTresses, FRANCE
pH plastic body electrode with 5 m cable • pH7 and pH9 buffer solutions in 55 mL containers • Floating level switch complete with plastic support • 1/2” inline PP electrode holder • Clamp 1/2” GF-DN50 saddle for electrode holder (2 pcs) • PVC M/F 1/2” - 3/8” reduction nipple • PP tube nut (2 ...
Manufactured by:TCR-Tecora based inCogliate (MB), ITALY
DDS system assembles in a single rack the sampler and the dilution unit. It is supplied by an internal rechargeable battery with a 7 hours autonomy. DDS is equipped with a membrane pump, a precision flowmeter and a dry gas meter. The two streams are regulated independently, so the dilution ratio should be changed to satisfy different stack condition. The temperatures inside the dry gas meter are ...
Manufactured by:TCR-Tecora based inCogliate (MB), ITALY
X-TDP (Twin Dilution Probe) is the last frontier of the gas sampling in stationary source emissions and process! Born from experience in the field and with the help of whom daily, it is faced with the need to operate with equipment that simplifies the collection of gas and allow to carry out several activities at the same time. Nonetheless, this solution allows a savings on investment compared to ...
Manufactured by:Dosatron International based inTresses, FRANCE
The 25-Gallon High Capacity Mobile Fill Cart conveniently allows the user to add and adjust disinfectant/chemical concentrations on ...
Manufactured by:Dekoron Unitherm based inCape Coral, FLORIDA (USA)
The heat traced sample/umbilical will maintain the gases at an appropriate temperature all the way from the probe assembly to the analyzer shelter. Good engineering practice dictates that this be short as possible but it is of more importance to place the analyzer in a convenient location. Lengths up to 1,000 feet are possible. The sample umbilical bundle will contain one or more tubes for the ...
Manufactured by:CleanAir Europe based inLa Penne-sur-Huveaune, FRANCE
The Model 108 Heated Sample Diluter dilutes an introduced sample gas of high concentration at a dilution ratio of 1:10 (standard) or 1:100 (optional) to allow linear measurement of total hydrocarbon concentration ratios greater than tens of thousands of ppm, up to 10% and higher. For faster response, greater range and zero stability, sample injection is the method of choice in this proven heated ...
Manufactured by:Topas GmbH based inDresden, GERMANY
The Dynamic Dilution System DDS 560 is designed to definitely and reproducibly dilute aerosols according to EN ISO 14644 part 3 and VDI 3491 Blatt 15 with possibility to adjust the dilution factor. The adjusted dilution factor is shown on a display. On the basis of this principle particles are removed from the sample according to the chosen and displayed dilution ratio. The particle size ...
Manufactured by:Topas GmbH based inDresden, GERMANY
The dilution system DIL 554 is designed to accurately dilute aerosols to produce a defined particle concentration. It has a stainless-steel housing and is battery-operated. The main application is the verification of test aerosols for testing clean rooms. EN ISO 14644-3 defines the necessity of appropriate dilution systems when using test aerosols for verification. According to Standard VDI 2083 ...