- Home
- Equipment
Refine by
Doseuro Environmental Equipment & Supplies
13 equipment items found
Manufactured by:Envirowater based inSantiago, CHILE
The SDP family of solenoid metering based metering pumps provides an alternative solution for low application rate situations where end users seek reliable results with simple operability and high precision, which is guaranteed using microprocessor ...
Manufactured by:FPZ S.p.A. based inConcorezzo, ITALY
PDP series positive displacement plunger dosing pump are manufactured according to API standard 675. Multiplex drive units with different performances can be coupled between them, independently from the size and stroke number. Stroke adjustment can be carried with the pump at rest or in operation. Accuracy is better than 1% from 10 to 100% of maximum output. Minimum required NPSh depends on ...
Manufactured by:FPZ S.p.A. based inConcorezzo, ITALY
Each pump is fitted with a standard gearbox reduction system and with a vertical mounted B14 shaped electric motor in accordance with UNEL-MEC specifications. The motor power range is from 0.18 Kw up to 0.75 KW as the European standard: 3 phase voltages of 230/400V @ 50/60Hz, 4 pole and 1 phase voltages of 230/50-60 Hz or 110/60 Hz. As motors conform to UNEL-MEC specifications, there are many ...
Manufactured by:FPZ S.p.A. based inConcorezzo, ITALY
Each pump is fitted with a standard gearbox reduction system and with a vertical mounted B14 shaped electric motor in accordance with UNEL-MEC specifications. The motor power range is from 0.18 Kw up to 0.37 KW as the European standard: 3 phase voltages of 230/400V @ 50/60Hz, 4 pole and 1 phase voltages of 230/50/60 Hz or 110/60 Hz. As motors conform to UNEL-MEC specifications, there are many ...
Manufactured by:FPZ S.p.A. based inConcorezzo, ITALY
Every pump is fitted with a standard gearbox reduction system and with vertical mounted B14 shaped electric motor in accordance with the UNEL-MEC specifications. The motor power range is from 0.18 Kw up to 0.75 Kw a the at European standard: 3 phase voltages of 230/400V @ 50/60Hz, 4 poles and 1 phase voltages of 230/50-60Hz or 110/60Hz. As motors conform to UNEL-MEC specifications, there are many ...
Manufactured by:FPZ S.p.A. based inConcorezzo, ITALY
Each pump is built with a standard gearbox reduction system and a vertically mounted B14 shaped electric motor in compliance with UNEL-MEC specifications. Motors power is usually 0,09 Kw with 4 poles: 3-phase 230/400 Volts 50/60 Hz, and single phase 230V/50 Hz or 110V/60 Hz. As the motors comply to UNEL-MEC specifications, there are many available options with different voltages, frequencies and ...
Manufactured by:FPZ S.p.A. based inConcorezzo, ITALY
The latest new DOSEURO product to improve the already well known high performance pumps. Quickly and Easily is the RAPIDA s motto, thanks to display, control board and different function that allow to immediately adjust the pump ...
Manufactured by:FPZ S.p.A. based inConcorezzo, ITALY
The SDP family provides an alternative solution in lower rates application field where end users look forward reliable results and simple operation. Using a built-in microprocessor, with its own flexibility, makes the SDP series extremely complete and suitable for a wide range of applications, thanks to several functions included in the same pump, even with few ...
Manufactured by:FPZ S.p.A. based inConcorezzo, ITALY
Doseuro pre-engineered JSO metering systems are designed to provide a complete dosing solution for all our metering pumps. JSO metering systems include rugged PP frames (1.5 cm) for single or dual dosing pumps and inlet and outlet discharge piping. Inlet piping includes an isolation ball valve, Y filter and calibration pot. Discharge piping includes isolation ball valves, pulsation dampeners, ...
Manufactured by:FPZ S.p.A. based inConcorezzo, ITALY
SDI Sandwich Hydraulic Diaphragm pumps are manufactured according API 675. SDI pumps are suitable for use when: The liquid to dose contains small amounts of suspended solids, the dosed liquid is a toxic solution, liquid leaking are not ...
Manufactured by:FPZ S.p.A. based inConcorezzo, ITALY
A built-in safety valve is installed in the hydraulic circuit, in order to protect the diaphragm against over pressure. The peculiarity of this pump is the special sandwich diaphragm and the reliability of the diaphragm rupture detection system. Each pump has a standard gearbox reduction system and is available with an IEC B14 electric motor that meets UNEL - MEC specifications. The motor power ...
Manufactured by:FPZ S.p.A. based inConcorezzo, ITALY
Type DMT and type DMM: High speed mixers directly coupled to the motor, for small tanks up to 1000 litres capacity, with polypropylene coated shaft and propeller. Type DEM: High speed mixers, directly coupled to the motor, supported by a protection lantern, housing an extra bearing kit, for increased shaft stability, and an extra seals kit, for increased protection from the mixed ...
Manufactured by:FPZ S.p.A. based inConcorezzo, ITALY
These plants produce from 300 to 5000 lt/h of fully polyelectrolyte solution at constant solution strength from powder /emulsion stock. Their compact design in Stainless steel AISI 304 or High Density PolyPropylene includes all necessary controls for water make up and polymer feed and incorporates the following equipment and features: Dissolution, diluition and ageing tanks. Polymer and water ...