- Home
- Equipment
Refine by
Eds Environmental Equipment & Supplies
17 equipment items found
Manufactured by:REDstack BV based inSneek, NETHERLANDS
The Desalt-ED cross flow stack is a special design EDR module (Electro Dialyses Reversal) for desalination of water. A single stack has a capacity of up to 36 m3/h waterflow (see models). Typical salt removal is 50 to 60%. The stack design prevents ionic shortcut currents, and has a low spacer thickness, which results in low energy ...
Manufactured by:Ram Environnement based inSt Ouenl`Aumone, FRANCE
To supply several engines that do not have the space to install the embedded version, or do not have the hydraulic force, but also to supply several Fog-Cannons TURBO-RAM during large demolitions operations, RAM Environnement has created a range groups of remote mixing. Then you only have to assemble the spray booms on the ...
Manufactured by:EDS srl Electronic Detection Systems based inSan Giovanni Lupatoto, ITALY
Optical beam smoke detector flush mount execution. Optical range ma 50 ...
Manufactured by:EDS srl Electronic Detection Systems based inSan Giovanni Lupatoto, ITALY
Optical reflector for Beam Smoke Detectors, 18×40 ...
Manufactured by:EDS srl Electronic Detection Systems based inSan Giovanni Lupatoto, ITALY
In spark detection systems, devices other than the specific detector are normally required. Usually these additional devices allow the detected sparks extinguishing, the acoustic signalling of alarms, the control of extinguishing systems and the eventual block of the silo material feeding ...
Manufactured by:EDS srl Electronic Detection Systems based inSan Giovanni Lupatoto, ITALY
Optical dust detector reflection – analog output 0-5V – relay output – RS485 – selectable scale 50-100-500-1.000 ...
Manufactured by:EDS srl Electronic Detection Systems based inSan Giovanni Lupatoto, ITALY
The flame detector FL20BX is formed by a special Optical Head made ??of light alloy, separated from the rest of the electronics (analyzer), explosion-proof Ex-d certified CESI. The Optical Head therefore allows for installation in environments where there is an atmosphere at risk of explosion and where the space available for installation are restricted. Important element is the fact that the ...
Manufactured by:EDS srl Electronic Detection Systems based inSan Giovanni Lupatoto, ITALY
Gas detector for Organic gases. Protection Index IP65. Microprocessor control. Automatic zero compensation. Analog output 0-5V. Optional output 4-20mA ...
Manufactured by:EDS srl Electronic Detection Systems based inSan Giovanni Lupatoto, ITALY
Gas detector for Alcohol and Solvent. Protection Index IP65. Microprocessor control. Automatic zero compensation. Analog output 0-5V. Optional output 4-20mA with US420 ...
Manufactured by:Environmental Data Services (EDS) based inNerang, AUSTRALIA
The EMS-003D Data Logger is a fully sealed, single channel event logger, which is internally powered via 2 AA Alkaline batteries and supplied in a powder coated aluminium, die cast enclosure and rated IP68 protection including connectors. The logger will work submerged to a depth of 30 metres. The EMS-003D Data Logger is capable of logging single channel Digital Input states such as Tipping ...
Manufactured by:Ram Environnement based inSt Ouenl`Aumone, FRANCE
Easy to install without large structural changes of the engine, RAM-ED is particularly suitable for urban use for excavators (all brands) equipped with hydraulic clamps, since operating directly on the high-pressure network of the excavator. The water supply can be done by a rotating arm on the excavator to avoid damaging the ...
Manufactured by:Environmental Data Services (EDS) based inNerang, AUSTRALIA
The Pump Station Manager (PSM) is an innovative, compact, user friendly computerised flowmeter and pump station management system, designed for the monitoring of universal pumping stations and wet-well ...
Manufactured by:ED-VAN Vantilator Sanayi Ve Ticaret Ltd Sti based inYenisehir, TURKEY
Capacity Range: From 550 m³/h to 66.000 m³/h flow rate. Being included in the category of industrial dust collectors, the cyclones are used directly or before the jet filter to collect solid particles. Cyclones operate on the dust separation principle, after a cyclonic movement at the inlet. Air lock and weighted cover can be counted as equipment of the unit. The cyclone collects ...
Manufactured by:EDS srl Electronic Detection Systems based inSan Giovanni Lupatoto, ITALY
In spark detection systems, devices other than the specific detector are normally required. Usually these additional devices allow the detected sparks extinguishing, the acoustic signalling of alarms, the control of extinguishing systems and the eventual block of the silo material feeding system. The operations described above are carried on by the SCP04 Control Unit in very short times, with ...
Manufactured by:EDS srl Electronic Detection Systems based inSan Giovanni Lupatoto, ITALY
The flame detector FL10 is capable of detecting within a few seconds a flame produced by a fire within its field view. It finds particular application in the places where it is assumed that a fire can develop quickly such example in the stores of petroleum products, paints, plastics, alcohols, etc.. The operating principle is based on the detection of the infrared radiation emitted by a flame. ...
Manufactured by:Environmental Data Services (EDS) based inNerang, AUSTRALIA
The EMS-050D Data Logger is a fully sealed multi channel logger, which is internally powered via a lithium battery and or via an analogue sensor channel. The logger is supplied in a powder coated aluminium die cast enclosure and rated to IP68 protection (including connectors). The logger will work submerged to a depth of 30 meters. The EMS-050D Data Logger is capable of logging multiple channel ...
Manufactured by:ED-VAN Vantilator Sanayi Ve Ticaret Ltd Sti based inYenisehir, TURKEY
Capacity Range: From 100 m³/h to 700.000 m³/h flow rate. Pressure Range: from 10 mmWC to 3500 mmWC pressure. Centrifugal fan is defined as a mechanical device that moves air or other gases. Centrifugal fans increase the air/gas flow volume by using the kinetic energy of the impellers. In turn, it moves the air against the resistance caused by ducts, valves, and other components. ...