- Home
- Equipment
Refine by
Geo Environmental Equipment & Supplies
158 equipment items found
Showcase
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The 200 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. The rig has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the center of gravity of the CPT crawler, either an electrical or mechanical probe (called a cone) is pushed into the ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
Lost or expendable tips are widely used by the geotechnical industry for numerous reasons, such as the placing of piezometer standpipes for groundwater profiling, soil gas, grouting, ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
For pulling the sounding tubes out of the ground after testing, Gouda-Geo supplies wedge clamps with hardened jaws in various sizes in combination with a pulling bowl. These wedge clamps can both be placed on top of the hydraulic and manual pulling devices. The largest advantage of wedge clamps is the fact that they do not really damage the tubes. They are safe and reliable devices and come at ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
A settlement beacon is a measuring pole with large footplate used to determine changes in the level of deeper soil layers when subject to forces caused by filling. It is also possible to determine more accurately the amount of filling material ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
Purpose designed hydraulic wrench for driving ground anchors of the 100 kN and 200 kN stand-alone and trailer-based CPT penetrometer rigs into and out of the ground. To be operated by 2 persons. The hydraulic power for the wrench is supplied by the power-pack of the CPT penetrometer rig. The wrench comes complete with 2 high-pressure hydraulic hoses of 6 meters length and is fitted with ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
In the quotations Gouda-Geo issues a clear distinction is made between on one hand the CPT penetrometer pusher (this could either be a << truck-based >>, << crawler-based >>, << trailer-based >> or << stand-alone >> unit) and on the other hand the CPT system (this could either be mechanical or electrical CPT(U) system with automated or manual ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
Our water level meters are accurate and reliable meters designed for fast, easy and reliable measurements of water levels (and optionally the temperature as well) in wells, piezometer standpipes, bore holes, observation tubes, tanks and in open water. Its sturdy design makes it a reliable tool suitable for intensive use and is easy to repair in case it might break ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The digital CPT-logger is the heart of the data acquisition system for geotechnical and environmental testing procedures, such as cone penetration testing (CPT). It is to be used in combination with a standard laptop or industrial computer and data acquisition software, such as a CPT-Explorer. You can order this innovative product at Gouda ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
Nearshore cone penetration testing is not as difficult as it might seem. In case of nearshore CPT (also referred to as over-water or marine CPT) the specifications of the equipment, the operation and the procedures to follow differ slightly from land testing. It is for reason recommendable to opt for a CPT penetrometer rig that has been purposely designed for this job. The 200 kN stand-alone CPT ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The sounding rods are used during Dynamic Penetration Testing (DPT) and Standard Penetration Testing (SPT) to hammer the sounding tips into the ground by means of a dynamic penetrometer rig. Gouda-Geo DPT and SPT sounding rods meet the highest quality standards. The rod material is manufactured by one of Europe’s leading steel manufacturers according to our own “Gouda-Geo” ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The hand pulled dynamic penetrometer rigs of the LMSR series are either driven by a gasoline engine, an electric motor or by a hydraulic ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The mud wiper is specially designed to wipe off effectively the dirt of the CPT sounding tubes when retracting them out of the ground. It is made of stainless steel, so no corrosion and it is easy to ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The 200 kN stand-alone CPT penetrometer set is a lightweight and economical rig with full Cone Penetration Testing (CPT) capabilities. It is suitable for both electrical and mechanical CPT testing. The stand-alone CPT penetrometer pusher set composes of a 200 kN penetrometer pusher featuring 2 hydraulic cylinders with manually operated valves and a stainless-steel housing for datalogger and ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The 110 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. The rig has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques in an efficient manner. By means of the penetrometer pusher, installed in the center of gravity of the CPT crawler, either an electrical or mechanical probe (called a cone) is pushed into the ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
Seismic cone penetration testing (SCPT or SCPTu) is an accurate and reliable geotechnical instrument and system used to determine low strain in-situ compression (P) and shear (S) wave velocity profiles. Our seismic CPT system is made for the international market. The seismic CPT system is used worldwide and features the following advantages: Seismic tests are carried out during a traditional ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The 200 kN multi-purpose CPT penetrometer platform is an economical skid-based rig with full CPT testing capabilities. It comes with CW-couplings for quick and easy attaching to a hydraulic excavator. It is suitable for both electrical and mechanical CPT testing. The platform is ballasted up to a weight of approx. 5,000 kg and fully autonomous due to its diesel-hydraulic power pack. It comes with ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The hand-pushed CPT penetrometers by Gouda Geo-Equipment are portable and handy tools for simple, quick and accurate assessment of soil conditions for various purposes. We deliver our penetrometer to many international companies for their soil investigation projects. Our penetrometers are easy and straightforward to operate; you can push them into the ground using the weight of your own ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
All Gouda-Geo CPT sounding tubes are suitable for mechanical cone penetration testing (in short CPTm or mCPT). The key characteristic of mechanical CPT is the fact that the reaction forces encountered by the mechanical cone are transferred to the measuring head by means of so-called inner rods. These rods can move freely without any obstruction inside the CPT sounding tubes. The rods are ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
The 200 kN CPT crawler is a CPT penetrometer rig based on a crawler undercarriage. It is designated as being a “basic” rig, since it lacks the electronically controlled hydraulics and remote control which comes with the “professional” 200 kN CPT crawler. The rig has been designed to execute soil mechanical research based on static Cone Penetration Testing (CPT) techniques ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
Purposely designed rig for working inside buildings. The short-stroke 200 kN pusher is provided with a built-in push-and-pull clamp and powered by a 400 Vac electric-hydraulic power-pack. Standard 1000 mm long CPT tubes are ...