- Home
- Equipment
Refine by
Herbold Environmental Equipment & Supplies
32 equipment items found
Manufactured by:Herbold Meckesheim GmbH based inMeckesheim, GERMANY
The Herbold guillotine was developed for the processing of bales of fibres, tapes, multifilaments, fishing nets, adhering films and large lumps or rubber bales. A hydraulically operated knife cuts the bales or lumps into slices of adjustable ...
Manufactured by:Herbold Meckesheim GmbH based inMeckesheim, GERMANY
The HGM series granulators have been developed for the size reduction of difficult, especially tough material or material containing foreign bodies, for which normal granulators have too short a knife life, and conventional shredders cannot produce the required end-product. Low-speed granulators – the right technology for shredding in the recycling ...
Manufactured by:Herbold Meckesheim GmbH based inMeckesheim, GERMANY
Due to a large working surface of the rotor, the machine has an excellent ingestion performance and is appropriate for materials that could only be fed in batches with traditional shredders, such as big-bags or large voluminous containers. The shredding of the material to a uniform and constant granular size is determined by the selection of the screen. Contrary to the conventional two-shaft ...
Manufactured by:Herbold Meckesheim USA - Resource Recycling Systems Inc. based inNorth Smithfield, RHODE ISLAND (USA)
Herbold HB granulators combines the features of a shredder with a large infeed hopper and hydraulic ram, with a horizontally fed granulator in a space saving ...
Manufactured by:Herbold Meckesheim GmbH based inMeckesheim, GERMANY
Grinders in the SML LS series minimise the amount of ultra-fine particles in the grinding stock thanks to their lower rotational speed and significantly reduce noise levels. Ideally suited to applications directly at the injection moulding ...
Manufactured by:Neue Herbold Maschinen-und Anlagenbau GmbH based inSinsheim, GERMANY
The granulators of the SMV series are fitted with the known advantages of the double cross cutting process. The well constructed rotor stator blade system is the actual tool with which the power is increased considerably. The compact design of the granulator SMV is a clearly visible design feature, which allows flexible use with low space ...
Manufactured by:Neue Herbold Maschinen-und Anlagenbau GmbH based inSinsheim, GERMANY
The NEUE HERBOLD Granulators SX series are equipped with the double cross cutting technique. Both the rotating knives, as well as the stator blades in the mill housing are arranged to each other at an angle. This technique ensures a precise cutting gap over the entire working width and for a precise cut. The noise level is thereby significantly ...
Manufactured by:Neue Herbold Maschinen-und Anlagenbau GmbH based inSinsheim, GERMANY
Equipped with “double cross cutting geometry”, the cutting mill LM produces a cleaner and more uniform granulate. In the mill housing, the rotor blades, and the slanted opposite stator knives are angeled to each other. The operation of this double cross-section ensures precise cutting gap along the full working width. In addition to lower noise, the thermal load of the supplied ...
Manufactured by:Neue Herbold Maschinen-und Anlagenbau GmbH based inSinsheim, GERMANY
The rotors of the NEUE HERBOLD granulators type SM are equipped with double cross cutting technique. Both the rotating knives, as well as the stator blades in the mill housing are placed to each other at an angle. This technique ensures a targeted constant gap over the entire wide of the working surface and also ensures effective cutting. Simultaneously, the noise level is significantly ...
Manufactured by:Neue Herbold Maschinen-und Anlagenbau GmbH based inSinsheim, GERMANY
A slow-speed rotor shaft is the key feature of HZR series. The feed material is hydraulically conveyed to the cutting area of the rotor by a pusher. After reaching the end position, the pusher automatically moves back to the starting position. For a strong pulling power, a powerful drive with mounted hydraulic clutch is ...
Manufactured by:Neue Herbold Maschinen-und Anlagenbau GmbH based inSinsheim, GERMANY
A special characteristic of the two shaft shredder of the ZRM Series are the low-speed shafts. They can be driven electrically or hydraulically. The shafts overlap each other – thus ensure a quick size-reduction process. To optimize the material feeding, the shredder can be equipped with a hydraulic ...
Manufactured by:Neue Herbold Maschinen-und Anlagenbau GmbH based inSinsheim, GERMANY
The pre-wash screws has are specially designed to discharge forein bodies in the material and for moistening of the material with water. This is mainly used for the recycling of film for pre-treatment and for protection of the intensive ...
Manufactured by:Neue Herbold Maschinen-und Anlagenbau GmbH based inSinsheim, GERMANY
The capacity of the pipe shredder depends on the impact strength, the wall thickness of the tubes and the screen perforation. The output per working hour is up to 3 tons with a perfect state of cutting tools. The feed of the pipe shredder is from the side by a feeding tub in front of the ...
Manufactured by:Neue Herbold Maschinen-und Anlagenbau GmbH based inSinsheim, GERMANY
The NEUE HERBOLD Screw Shredder plants are equipped with pairs of similarly helicaly srew shafts. The breaking shafts are stored in a welded trough-shaped housing. For the separation of sand and soil, the housing can be equipped with a sieve bottom. The breaking of the feeding material works via shear forces both between the screw shafts and the counter teeth in the housing. The slide shafts are ...
Manufactured by:Neue Herbold Maschinen-und Anlagenbau GmbH based inSinsheim, GERMANY
The NEUE HERBOLD hammer mills series HM have versatile applications. At extremely high throughput rates, this series has been specially developed all brittle materials for the economical size ...
Manufactured by:Herbold Meckesheim USA - Resource Recycling Systems Inc. based inNorth Smithfield, RHODE ISLAND (USA)
Herbold SML series general purpose granulators are robust and low-noise machines for general purpose applications. Compact, transportable, easy to clean. Perfect design for frequent color and material changes. They are suitable for processing all light, bulky or voluminous plastics scraps with thin or medium walls including; films, cans, barrels, car bumpers, thin-walled tubes, profiles, ...
Manufactured by:Herbold Meckesheim USA - Resource Recycling Systems Inc. based inNorth Smithfield, RHODE ISLAND (USA)
Herbold HV Series Plastcompactors Agglomerator / Densifiers are used for the processing and preparation of plastics including the agglomeration of powders, fibers, film and foam materials; drying of powders, fibers, film and foam materials; re-crystallization of PET flakes; and compounding of thermo-plastics and ...
Manufactured by:Herbold Meckesheim GmbH based inMeckesheim, GERMANY
The SMP series for the processing of profiles and pipes. These are self-feeding machines with a horizontal feed hopper for bars measuring six metres or more in length. An additional inlet for short pieces and mitre offcuts is ...
Manufactured by:Herbold Meckesheim GmbH based inMeckesheim, GERMANY
Herbold granulators with forced feeding of the type SB have been in successful use worldwide for many years. The feed material is not fed into the grinding chamber by gravity, as in the case of standard granulators, but by an even feeding by screw ...
Manufactured by:Herbold Meckesheim GmbH based inMeckesheim, GERMANY
We can supply hammer mills for size reduction tasks that mainly need to be done by means of impact and blows. We build them in sizes from 450 x 600 to 1000 x 2500 mm circle of rotation diameter x working width and with drives up to 200 kW. It is possible to make hammer mills that are relatively insensitive to foreign bodies. Typical applications in plastics recycling are the pre-shredding of old ...