- Home
- Equipment
Refine by
Iag Environmental Equipment & Supplies
11 equipment items found
Manufactured by:Ingeniería Acústica García-Calderón S.L.L. (IAG) based inMadrid, SPAIN
Ultra-light power generator-amplifier, model DD500G, (ref 14021), with built-in pink noise generator, 2 x 500 W r.m.s. It is recommended to connect the same to the ultra-strong dodecahedron DD14, to obtain the maximum use of the sound level that the DD14 source is capable of ...
Manufactured by:Ingeniería Acústica García-Calderón S.L.L. (IAG) based inMadrid, SPAIN
If you need to have the directivity diagram and the directivity index of your source (with its specific serial number), at IAG we offer you the test service to verify the directivity of the sound sources used to perform insulation tests. acoustic according to the following standards: Section 4.2.1 of ISO 3382-1 and ISO 3382-2. Annex A1 of ISO 140-4. Annex A2 of ISO16283-1: 2014. Annex D2 of ISO ...
Manufactured by:Ingeniería Acústica García-Calderón S.L.L. (IAG) based inMadrid, SPAIN
It is designed for use with the dodecahedrons of the IAG DD5 and DD14, also being compatible with loudspeakers that have tripod fixing holes of 35 mm in ...
Manufactured by:Ingeniería Acústica García-Calderón S.L.L. (IAG) based inMadrid, SPAIN
Black, ultralight and padded bag, for safe, comfortable and light transport of DD5 dodecahedron or DD14 dodecahedron and ...
Manufactured by:Ingeniería Acústica García-Calderón S.L.L. (IAG) based inMadrid, SPAIN
The remote control jack for the IAG DD400 amplifier is the easiest way to turn the amplifier on or off. With a typical transmission range of 25 m, the signal is able to pass through most of the walls and ...
Manufactured by:Ingeniería Acústica García-Calderón S.L.L. (IAG) based inMadrid, SPAIN
ALL-IN-ONE transport case, to house the DD5 dodecahedron and the DD400G power ...
Manufactured by:Ingeniería Acústica García-Calderón S.L.L. (IAG) based inMadrid, SPAIN
Rigid suitcase, small, light and resistant, for the transport of the sound source IAG DD5. Ideal complement for the safe transport of the IAG DD5 sound source. It is a flight-case of small dimensions in which the sound source DD5 of IAG will be protected during ...
Manufactured by:Ingeniería Acústica García-Calderón S.L.L. (IAG) based inMadrid, SPAIN
Characteristics: Length: 3 m. Flexibility. Speak-ON connectors on their ...
Manufactured by:Ingeniería Acústica García-Calderón S.L.L. (IAG) based inMadrid, SPAIN
Tripod made of high quality black aluminum. Details and joints made of black plastic and neoprene foam grips for ergonomics. It has a shoe with 3/8 "thread where the appropriate adapter cylinder must be fixed to place the DD5 ...
Manufactured by:Ingeniería Acústica García-Calderón S.L.L. (IAG) based inMadrid, SPAIN
If you are going to perform insulation tests to airborne noise between enclosures or to measure reverberation time, do you need two people to transport it? Do you have back pain? Does it cost to raise the sound source 7 floors without a lift? it costs to load and unload the source of the vehicle ?, does not fit in the trunk ...
Manufactured by:Ingeniería Acústica García-Calderón S.L.L. (IAG) based inMadrid, SPAIN
When we need to perform airborne sound insulation tests between enclosures with high acoustic insulation (above 70 dBA DnTA), we have a serious problem: we can not generate sufficient sound level in the emitter enclosure to measure levels in the receiver enclosure with sufficient and acceptable Signal / Noise ratio. Well, because the insulation is very high or because the background noise in the ...