- Home
- Equipment
Refine by
Injecta Environmental Equipment & Supplies
39 equipment items found
Manufactured by:Injecta S.r.l. based inRieti (RI), ITALY
Suitable for the preparation of reagents and chemical, PVC, PE, Resins Transmission Shaft. Vertical Type, Compact Mixer, suitable for installation on polyethylene ...
Manufactured by:Injecta S.r.l. based inRieti (RI), ITALY
Hydro pump series pumps are installed on water net and use water flow rate it self as only propeller force. In this way they aspire the concentrated product, dose it according to percentage set and MIX it with the water passing by the solution obtained is then sent down stream. The Product Dose is always Proportional to Volume of water passing trough Hydro pump or whatever the Flow rate is or ...
Manufactured by:Injecta GmbH based inKlingenthal, GERMANY
Micro-blasted areas are used for a better glue joint with plastic components. Micro-blasted areas on the needle point are used as echo sound markings for ultrasonic ...
Manufactured by:Injecta S.r.l. based inRieti (RI), ITALY
These pumps are plunger piston metering pumps featuring a spring return stroke in an alluminium housing with oil bath. Each pumpis equipped with manual flow adjustment and can be equipped with an electric actuator which accepts A 4÷20 mA or ...
Manufactured by:Injecta S.r.l. based inRieti (RI), ITALY
These pumps are plunger piston metering pumps featuring a spring return stroke in an alluminium housing with oil bath Each pumpis equipped with manual flow adjustment and can be equipped with an electric actuator which accepts a 4÷20 mA or inverter. SS316 or PVC pump head. SS316 or ceramic piston. STROKE 25 mm. 40÷1000 lt/h max flow rate. 20 bar max pressure. 58-78-116 fixed ...
Manufactured by:Injecta S.r.l. based inRieti (RI), ITALY
These pumps are plunger piston metering pumps featuring a spring return stroke in an alluminium housing with oil bath. Each pumpis equipped with manual flow adjustment and can be equipped with an electric actuator which accepts A 4÷20 mA OR inverter. SS316, PP, PVDF or PVC pump head. PTFE DIAPHRAGM. Spring return mechanism in a PP housing. 17÷60 lt/h max flow rate. 5 bar max ...
Manufactured by:Injecta S.r.l. based inRieti (RI), ITALY
These pumps are plunger piston metering pumps featuring a spring return stroke in an alluminium housing with oil bath. Each pumpis equipped with manual flow adjustment and can be equipped with an electric actuator which accepts A 4÷20 mA or inverter. Piston/diaphragm dosing pumps with assembled inverter. SS316 or PVC pump head. SS316 or ceramic piston. In order to meet the power needs of ...
Manufactured by:Injecta S.r.l. based inRieti (RI), ITALY
Mono-lamp sterilizers for potable water are distinguished by their limited sizes. Enjoy the advantages of compact size and easy maintenance. The low pressure lamp’s disinfection capability 30.000 ...
Manufactured by:Injecta S.r.l. based inRieti (RI), ITALY
Simplicity in manufacture with the possibility of using stainless steel cartridges, polypropylene or alternative material. Optional: Able to for Backwash, Has Internal Anti-Corrosion Treatment, Use of Tri-Clamp Hydraulic Connection, Customized Sizing. Manifold collector: SS304 (INT/EXT Polished Steel). Filter Cartridges with passing hole, varying degrees of filtration, any material, Ø ext. ...
Manufactured by:Injecta S.r.l. based inRieti (RI), ITALY
Analogue electromagnetic dosing pump with constant dosing, with flow rate adjustment via knob on the front ...
Manufactured by:Injecta S.r.l. based inRieti (RI), ITALY
Analogue electromagnetic dosing pump with constant dosing, with flow rate adjustment via knob on front panel and proportional according to external analogue signal (4÷20 mA), LED operation indicator and provision for level ...
Manufactured by:Injecta S.r.l. based inRieti (RI), ITALY
Analogue electromagnetic dosing pump with constant, manually adjustable and proportional dosing by digital signal (e.g. pulse ...
Manufactured by:Injecta S.r.l. based inRieti (RI), ITALY
PVDF PUMP HEAD suitable for chemicals used in industrial, water treatment and drinking water applications. SFERA CERAMICA dosage reliability and full chemical ...
Manufactured by:Injecta S.r.l. based inRieti (RI), ITALY
Base-mounted dosing pump with stroke adjustment and constant dosing ...
Manufactured by:Injecta S.r.l. based inRieti (RI), ITALY
Suitable for the waste water treatment in industrial process. Compact fast or slow mixer. Aerator mixers. Flocculant use ...
Manufactured by:Injecta S.r.l. based inRieti (RI), ITALY
Digital electromagnetic dosing pump with constant, proportional dosing via an external analogue signal (0/4÷20 mA or 20÷4/0 mA) or a digital signal (water level, voltage ...
Manufactured by:Injecta S.r.l. based inRieti (RI), ITALY
Base-mounted dosing pump with stroke adjustment and proportional dosing ...
Manufactured by:Injecta S.r.l. based inRieti (RI), ITALY
Flow Rate: 70÷100 lt/min. Pressure: 10 bar. Water Temperature: 2÷40 °C. In/Out Connections: /2” - 1”. Dimensions: 108x234 ...
Manufactured by:Injecta S.r.l. based inRieti (RI), ITALY
Flow Rate: 70÷160 lt/min. Pressure: 10 bar. Water Temperature: 2÷40 °C. In/Out Connections: 3/4” - 1”, 1”1/2 - 1”1/4. Dimensions: 167x344 mm. 220V - 50Hz Power ...
Manufactured by:Injecta S.r.l. based inRieti (RI), ITALY
These pumps are plunger piston metering pumps featuring a spring return stroke in an alluminium housing with oil bath. Each pumpis equipped with manual flow adjustment and can be equipped with an electric actuator which accepts a 4÷20 ma or inverter. SS316, PP, PVDF or PVC pump head. PTFE diaphragm. Stroke 2-4-6 mm. 5,5÷460 lt/h max flow rate. 10 bar max pressure. 58-78-116 fixed ...