- Home
- Equipment
Refine by
Ipec Environmental Equipment & Supplies
16 equipment items found
Manufactured by:JWC Environmental based inSanta Ana, CALIFORNIA (USA)
The PLB and PLT dewatering auger conveyor systems work as a screenings press to capture materials from municipal and industrial wastewater screens. Wet debris waste is dewatered and compacted while is being conveyed it to a discharge point. The PLB screw conveyor consists of a spiral, mechanical gear drive, U-trough housing, screen sections, cleaning shower, and a mechanical tensioning device. ...
Manufactured by:IPEC based inChapel Hill, NORTH CAROLINA (USA)
The process is based on low-temperature pyrolysis principle, involving the use of heat to thermally decompose hydrocarbon-based material in the condition of oxygen ...
Manufactured by:IPEC Global based inRialto, CALIFORNIA (USA)
1000-Jr Reactors can stand-alone or be integrated with classifiers, pump stations, etc. These units come fully assembled including multi-stage reactor tank, mixers, automated chemical addition pumps and controls with full instrumentation. They can be configured for hundreds of different waste streams besides the ones you see here. Contact us for details. 1000-Jr flow rates can vary from as low ...
Manufactured by:IPEC Global based inRialto, CALIFORNIA (USA)
1000-STD Reactors can stand-alone or be integrated with a classifier, pump station, filter press, etc. The reactors come fully assembled including multi-stage reactor tank, mixers, automated chemical addition pumps and controls with full instrumentation. As with all of our reactors they can be configured for hundreds of different waste streams besides the ones you see here. Call us for details. ...
Manufactured by:IPEC Global based inRialto, CALIFORNIA (USA)
Level-1 systems are supplied with a polyethylene conical bottom reactor tank, skid mounted structural platform, high efficiency mixer, recipe driven process control, up to 4 reagent pumps, two of which are time dosed. Automated over-temp shut down, integrated control ...
Manufactured by:JWC Environmental based inSanta Ana, CALIFORNIA (USA)
Receiving System Tank Screens Out Solids: TLT Sewage Receiving systems are designed for taking in municipal sewage or septage and screening out solids prior to passing it on for further treatment. The TLT 100-300 products are designed to receive pumped municipal sewage and the larger TLT 400 and 500 are able to also accept septage waste from haul ...
Manufactured by:IPEC Global based inRialto, CALIFORNIA (USA)
Our premier Pump and Lift Station, when you need the best! The IPEC Series 500 is a fully integrated pump and lift station combining receiver tank, pumps, valving/piping and automated controls for transferring continuous or intermittent flows of wastewater streams from upstream processes. This is a dual pumping system that is fully automated with multi-level sensor controls and alarms. The ...
Manufactured by:IPEC based inChapel Hill, NORTH CAROLINA (USA)
The process is based on low-temperature pyrolysis principle, involving the use of heat to thermally decompose hydrocarbon-based material in the condition of oxygen deficit. ...
Manufactured by:IPEC based inChapel Hill, NORTH CAROLINA (USA)
The amount of electricity generated is calculated in each case; depends on calorific value, type and volume of raw ...
Manufactured by:IPEC based inChapel Hill, NORTH CAROLINA (USA)
The amount of electricity generated is calculated in each case; depends on calorific value, type and volume of raw ...
Manufactured by:IPEC Ltd based inManchester, UNITED KINGDOM
The AA Ultrasonic acoustic probe is designed for use on air insulated terminations where a clear sound path between the electrically stressed insulation and the probe is ...
Manufactured by:IPEC Ltd based inManchester, UNITED KINGDOM
IPEC’s UHF (Ultra High Frequency) sensors are used to detect PD in EHV cable terminations, GIS (Gas Insulated Switchgear). The sensors pick up signals in the UHF range (200MHz-2.5GHz) and are mounted against the insulating barrier spacers that separate components of the HV asset. The sensors work with multiple IPEC monitoring ...
Manufactured by:IPEC Global based inRialto, CALIFORNIA (USA)
Level-2 systems are supplied with all of the features of a Level-1 system plus OPR monitor/control and additional reagent pumping systems. Level-2 systems are very flexible and can be configured for most applications. Contact us for ...
Manufactured by:IPEC Ltd based inManchester, UNITED KINGDOM
The ASM-Portable is a Portable Partial Discharge (PD) Monitor for cables, switchgear, and other high-voltage assets. The unit is part of the IPEC’s wider range of on-line PD monitoring systems. The ASM-P can be configured with up to 32 PD sensor channels. If excessive discharge is detected, the ASM-P raises an alarm that can be configured either locally or by email. This enables the ...
Manufactured by:JWC Environmental based inSanta Ana, CALIFORNIA (USA)
The PPS Compactor extracts moisture from solids by the compaction of slurry against a tubular screen element with perforated round or slotted holes. Solids are retained on the surface areas and liquid is passed through the holes. Compaction occurs as the solids are transported by a screw. The screw is designed so that pressure is gradually increased during transport, which helps in retaining ...
Manufactured by:IPEC Ltd based inManchester, UNITED KINGDOM
The CC-TEV Capacitive Coupler detects TEVs as they pass over the cladding of the high voltage plant. Fast output signals are recorded by the ASM, PrecisePD or PD-SG1 systems. The sensor is encased in a durable PVC sleeve for added protection. Embedded in the body are powerful magnets allowing for coupling to steel ...