- Home
- Equipment
Refine by
Link Belt Environmental Equipment & Supplies
20 equipment items found
Manufactured by:Link-Belt Cranes based inLexington, KENTUCKY (USA)
Greaseless 38 ft – 142 ft (11.6 m – 43.3 m) full-power five-section boom. Optional two-piece SmartFly is available with offset positions of 2°, 15°, 30°, and 45° with no capacity deducted for stowed attachment. Fully rigged transports under 105,000 lbs (47 627 kg) with counterweights installed. Ergonomic operator’s cab designed with the operator in ...
Manufactured by:Link-Belt Cranes based inLexington, KENTUCKY (USA)
Greaseless 41 ft – 127 ft pin and latch four-section boom. Manually offsetable one- or two-piece fly: offsetable to 2°, 15°, 30°, and 45°. Full fly is stowable on the machine, and no capacity deducts for stowed ...
Manufactured by:Link-Belt Cranes based inLexington, KENTUCKY (USA)
36.8 ft – 115 ft full-power greaseless formed boom (five feet longer than predecessor). 28.5 – 51 ft two-piece onboard fly. Full fly is stowable on the machine, and no capacity deducts for stowed attachment. 171 ft maximum tip height with full attachment. Transports fully equipped at under 84,000 lbs with 18,400 lb counterweight. ...
Manufactured by:Link-Belt Cranes based inLexington, KENTUCKY (USA)
Greaseless 42.7 ft – 197.3 ft pin and latch six-section boom. Three-piece (10 ft – 32.5 ft – 55 ft) fly with integrated heavy-lift section: manual OR hydraulic offset options. One, two, or three available lattice inserts to achieve max tip height of 315.1 ...
Manufactured by:WSG & Solutions, Inc. based inMontgomeryville, PENNSYLVANIA (USA)
Rugged and reliable, Link-Belt Catenary Bar Screens are commonly used in unattended applications such as CSO control facilities, where the debris loads can be heavy and varied. Sprockets, bearings and shafts are located above the maximum water level, facilitating ease of maintenance and the potential for damage and corrosion. The rakes bear against the face of the bars by the catenary action of ...
Manufactured by:Link-Belt Cranes based inLexington, KENTUCKY (USA)
Four-section 38.6 ft – 120 ft (11.8 m – 36.5 m) full-power boom — maximum tip height of 184.5 ft (56.2 m) with SmartFly. V-CALC offers variable side frame track positions. TCC-800 offers optional one- or two-piece 35 ft – 58 ft (10.6 m – 17.6 m) ...
Manufactured by:WSG & Solutions, Inc. based inMontgomeryville, PENNSYLVANIA (USA)
The Link-Belt® 4-Rope Bar Screen is a fixed bar rack, cable type front cleaned screen. As flow passes through the screen, debris is captured against the bar rack. The debris is then removed by the rake teeth that engage into the bar rack to lift debris up to the discharge point where a wiper deposits it into either a sorting tray, compactor, grinder, conveyor or ...
Manufactured by:Syntron Material Handling based inSaltillo, MISSISSIPPI (USA)
The Link-Belt D3000 series idler is manufactured to CEMA dimensional standards and exceeds CEMA D idler load ratings. The C/D3000 idler features factory lubricated and sealed-for-life rolls, which eliminate re-lubrication maintenance costs. The C3000 line is also available with lubrication fittings at both ends of the idler for ease in field re-greasing from either side of the conveyor. This ...
Manufactured by:Link-Belt Cranes based inLexington, KENTUCKY (USA)
Greaseless 38 ft – 142 ft (11.6 m – 43.3 m) full-power five-section boom. Two-piece manual offsetable fly is available with offset positions of 2°, 15°, 30°, and 45° with no capacity deducted for stowed attachment. Fully rigged transports under 100,000 lbs (45 359 kg) with counterweight ...
Manufactured by:WSG & Solutions, Inc. based inMontgomeryville, PENNSYLVANIA (USA)
The Link-Belt Type AS Grit Collector is designed for small plants with flows up to 10 MGD. The unit consists of a hopper with an inclined screw and grit washer for removing and washing grit. Air is provided to maintain uniform velocities at all flows. The unit uses compressed air through diffusers to create and maintain circulating velocities of 1 to 2 fps. This produces optimum conditions to ...
Manufactured by:Link-Belt Cranes based inLexington, KENTUCKY (USA)
Greaseless 36.8 ft – 115 ft full-power four-section formed boom (five feet longer than predecessor). Manually offsetable one- or two-piece fly: offsetable to 2°, 20°, and 40°. Full fly is stowable on the machine, and no capacity deducts for stowed ...
Manufactured by:Link-Belt Cranes based inLexington, KENTUCKY (USA)
Greaseless 41 ft – 127 ft pin and latch four-section boom. Manually offsetable one- or two-piece fly: offsetable to 2°, 15°, 30°, and 45°. Full fly is stowable on the machine, and no capacity deducts for stowed ...
Manufactured by:Link-Belt Cranes based inLexington, KENTUCKY (USA)
Greaseless 38 ft – 115 ft (11.6 m – 35 m) full-power four-section boom. Two-piece manual offsetable fly is available with offset positions of 2°, 15°, 30°, and 45° with no capacity deducted for stowed ...
Manufactured by:LBX Company, LLC based inLexington, KENTUCKY (USA)
SAE Net Horsepower: 120 HP (89.7 kW). Operating Weight: 39,500 lbs (17.9 metric tons). ...
Manufactured by:LBX Company, LLC based inLexington, KENTUCKY (USA)
SAE Net Horsepower: 120 HP (89.7 kW). Operating Weight: 42,100 lbs (19.1 metric ...
Manufactured by:Link-Belt Cranes based inLexington, KENTUCKY (USA)
Full-power 36.8 ft – 115 ft (11.2 m – 35.1 m) four-section boom with two boom extend modes (EM1, EM2). Greaseless boom includes Link-Belt’s proven Teflon-impregnated wear pads for easy maintenance. Durable textured and slip-resistant paint on all walking surfaces is new and improves ...
Manufactured by:Syntron Material Handling based inSaltillo, MISSISSIPPI (USA)
Link-Belt elevator buckets are engineered to handle bulk materials efficiently in both centrifugal discharge and continuous bucket elevators. Available in diverse types and sizes, these buckets are constructed from materials such as formed steel, ductile iron, Promal, nylon, and polyethylene. Ductile iron is favored in cast buckets due to its resilience against abrasion and stress during digging. ...
Manufactured by:Syntron Material Handling based inSaltillo, MISSISSIPPI (USA)
The Link-Belt E4000 series idler line features factory lubricated and sealed-for-life rolls, which eliminate re-lubrication maintenance costs. The E4000 Idler line is also available with lubrication fittings at both ends of the idler for ease in field re-greasing from either side of the conveyor. Boasting load ratings exceeding CEMA E requirements, this idler line is designed for maximum capacity ...
Manufactured by:WSG & Solutions, Inc. based inMontgomeryville, PENNSYLVANIA (USA)
The Link-Belt Type ASB Grit Collector will handle flows of 1.5 MGD or more. The system uses a longitudinal screw in the bottom of the chamber to move the grit to a bucket elevator which lifts it to a discharge point. A type SW grit washer is used to wash and dewater the collected grit. The Type ASB Grit Collectors are available with Swingfuser aerators which provide maintenance accessibility to ...
Manufactured by:Syntron Material Handling based inSaltillo, MISSISSIPPI (USA)
The Link-Belt bucket elevators, designed by Syntron Material Handling, are crafted for robust performance and reliability in various bulk handling applications. These elevators come in standard Type 1 and Type 7 models, each offering unique features to effectively manage a wide range of materials. Known for their quality and dependability, Link-Belt elevators are suitable for industries requiring ...