- Home
- Equipment
Refine by
Mcwane Environmental Equipment & Supplies
14 equipment items found
Manufactured by:McWane Ductile - A Division of McWane, Incorporated based inCoshocton, OHIO (USA)
Cast iron pipe has long been the standard material for conveying water and sewage in municipal, utility and industrial piping systems. The life expectancy of cast iron pipe is unknown but is estimated to be 100 years or more. The oldest operating cast iron main is in Versailles, France, which was installed in 1664. There are more than 500 members of the Cast Iron Pipe Century Club, a unique ...
Manufactured by:McWane Ductile - A Division of McWane, Incorporated based inCoshocton, OHIO (USA)
All the best of Tyton or Fastite rubber-gasket sealed ductile iron pipe joints with triple the maximum deflection available from either. Designed and used in subaqueous installations where lateral forces and an unsure bury condition demand a strong yet flexible restraint joint piping system. 15-degrees of deflection per joint equates to a 4-1/2 foot available offset in every full length of pipe ...
Manufactured by:McWane Plant & Industrial (MPI) based inBirmingham, ALABAMA (USA)
Designed for years of dependable service, the superior design of our butterfly valve provides ease of adjustment along with the ensured dependability expected in any distribution system or plant installation. Our butterfly valve has a 100% bubble tight seal via a 316 stainless steel ring located in the body, and rubber seat located on the vane. The rubber seat provides a 'zero leakage' ...
Manufactured by:McWane Plant & Industrial (MPI) based inBirmingham, ALABAMA (USA)
MPIs Eccentric Plug Valves are designed for consistent performance, durability and longevity. Built to the AWWA C517 standard, the Eccentric Plug Valves are available in sizes 3"-48" for 100% port with a variety of end connections. A reliable and engineered product capable of bi-directional flow at fully rated pressures. Dependable in a variety of service ...
Manufactured by:McWane Plant & Industrial (MPI) based inBirmingham, ALABAMA (USA)
During the 1980’s, the waterworks industry was introduced to the resilient seated gate valve and Kennedy Valve Company was at the forefront of this industry wide movement. Today we offer both our KS FW AWWA C509 Full Wall and KS RW AWWA C515 Reduced Wall resilient seated gate valves, embodying the latest valve technology for simplicity, durability, and superior ...
Manufactured by:McWane Plant & Industrial (MPI) based inBirmingham, ALABAMA (USA)
MPIs line of rotating disc gate valves has been utilized successfully since 1908 in water/wastewater treatment plants and water lines all over the United States. If you are looking for an extended life valve, this valve is your choice for generations of service. MPIs rotating disc gate valves clean themselves with every operation. Deposits are removed in travel, so nothing builds up on the ...
Manufactured by:McWane Ductile - A Division of McWane, Incorporated based inCoshocton, OHIO (USA)
The 'original' modern pipe joint, circa 1925; the mechanical joint remains in use primarily as a means for connecting fittings, valves, and similar appurtenances to a pipeline. The nuts, bolts, and gland featured in the joint provide a permanent watertight seal to 350 psi and more through a “stuffing box” compression of the gasket into its counterpart triangular recess of the ...
Manufactured by:McWane Ductile - A Division of McWane, Incorporated based inCoshocton, OHIO (USA)
The Mechanical with Tyton Joint pipe combines the ease of connecting fittings and valves with the simple, reliable, and proven Tyton Joint gasket sealing system. Available in sizes 6' through 24', this dual purpose ductile iron product could be used in both push on and restrained ...
Manufactured by:McWane Plant & Industrial (MPI) based inBirmingham, ALABAMA (USA)
MPIs NRS style ductile iron/stainless steel mud valves are designed primarily for use in settling tanks of water and wastewater treatment plants. They are available in both ductile iron and stainless steel bodies. Their intended use is to drain tanks for maintenance or cleaning. Mud Valves are furnished with a 2” square operating nut; however, they can be supplied with optional extension ...
Manufactured by:McWane Plant & Industrial (MPI) based inBirmingham, ALABAMA (USA)
MPIs Swing Check Valves are designed and manufactured in conformance with AWWA C508. Under certain circumstances where it is desirable to have more positive control of the closing on the disc, the valves can be supplied with either lever-and-spring or lever-and-weight. Swing check valves are used for the prevention of backflow in water systems where there is the possibility of a pollutant in the ...
Manufactured by:McWane Plant & Industrial (MPI) based inBirmingham, ALABAMA (USA)
The KEN-FLEX resilient-hinged check valve provides reduced maintenance and faster closing than most traditional swing check valves. The rubber-encapsulated flapper assembly is the only moving part and is easily accessed through a full-size cover with the valve in line. The resilient flapper material makes KEN-FLEX" ideal for "dirty water" applications, and the fast-closing action is ideal for ...
Manufactured by:McWane Plant & Industrial (MPI) based inBirmingham, ALABAMA (USA)
During the 1980’s, the waterworks industry was introduced to the resilient seated gate valve and Kennedy Valve Company was at the forefront of this industry wide movement. Today we offer both our KS FW AWWA C509 Full Wall and KS RW AWWA C515 Reduced Wall resilient seated gate valves, embodying the latest valve technology for simplicity, durability, and superior ...
Manufactured by:McWane Ductile - A Division of McWane, Incorporated based inCoshocton, OHIO (USA)
Although zinc coated Ductile Iron Pipe may seem new to North America, it was first introduced for use in North America in the 1980’s by McWane Ductile’s Canada Pipe Division, which was then known as CANRON. ...
Manufactured by:McWane Ductile - A Division of McWane, Incorporated based inCoshocton, OHIO (USA)
Fabricated pipe is made to custom lengths to meet specific project needs. Fabricated pipe can be cement, glass, or Protecto 401 lined to meet all applications. Exterior coatings available include standard Bituminous, Tnemec primers and epoxies, as well as other specialty coatings as ...