- Home
- Equipment
Refine by
Micatrone Environmental Equipment & Supplies
64 equipment items found
Manufactured by:AB Micatrone based inSolna, SWEDEN
The sensor is intended to be used when measuring temperature on liquid in pipes from outside the ...
Manufactured by:AB Micatrone based inSolna, SWEDEN
The MN-1000 is a rotary guard designed to monitor the speed of fans, shafts, stoker screws and motors. The MN-1000 can be used with two types of sensors: Passive donor type Micatrone MGN-10 or, Namur sensor type Micatrone ...
Manufactured by:AB Micatrone based inSolna, SWEDEN
Micaflex OPD operator panel is an accessory that reflects the main device's indications, alarms and functions. OPD is suitable for the pressure and flow sensors Micaflex PFT, PFA, PFC and PFTT as well as the moisture and temperature sensors Micaflex HTT and ...
Manufactured by:AB Micatrone based inSolna, SWEDEN
The MI-4000/HL is a temperature monitor for monitoring both high and low flue gas temperatures in biofuel-fired ...
Manufactured by:AB Micatrone based inSolna, SWEDEN
The sensor is intended to be used for high temperature measurements, up to 600°C. The sensor consists of a Pt-100 element (100 ohms at 0°C) mounted in an acid-proof tube. The sensor has a fixed insert length and is attached to the duct with an external G1/2" pipe ...
Manufactured by:AB Micatrone based inSolna, SWEDEN
The MS-35M4-LR actuator is intended for regulating dampers, guide rails and valves. The control signal is selectable current or voltage signal. Mode output is available for both current and voltage signals. The actuator has an optional function for flow linearization of butterfly ...
Manufactured by:AB Micatrone based inSolna, SWEDEN
Plug-in transformer suitable for Micaflex P/PD/FD ver 4 and Micaflex PFT ver 3. The transformer module is used when only 230 VAC supply voltage is available and / or when one wishes the output signal to be galvanically separated from the supply voltage. ...
Manufactured by:AB Micatrone based inSolna, SWEDEN
The temperature sensor is intended for measuring the temperature of ventilation systems or similar applications. The temperature sensor's sensing element (Pt-100) is mounted in a thin acid-proof tube, which gives the sensor a short time ...
Manufactured by:AB Micatrone based inSolna, SWEDEN
Micatrone butterfly valve MTT-HG is intended for on/off and control applications in the process industry on media such as steam, gases, liquids and other media that do not attack the material included in the ...
Manufactured by:AB Micatrone based inSolna, SWEDEN
Summary unit with 3 analog inputs and 1 analog output. Micaflex SU/3 has 3 analog inputs for 0-10 VDC and 1 analog output for summing up the three input signals. Each input signal can be adjusted. It is possible to sum 2 inputs and subtract for the third ...
Manufactured by:AB Micatrone based inSolna, SWEDEN
Module boards for Modbus RTU communication: 60-5338-1 Micaflex ver 3 PFA, PFA-PU, PFC, PFCA, PFT and PFTT, pressure and flow sensors, 60-5338-2 Micaflex ver 4 HTT and HTC/T2, humidity and temperature sensors, 60-5338 Micaflex ver 5 FHC, fume hood control, 60-5338-6 Micaflex ver 5 PD/FD, pressure and flow sensor. Allows data communication with Modbus RTU via RS-485 interface. ...
Manufactured by:AB Micatrone based inSolna, SWEDEN
MFM-ZP is a module for automatic zero setting of pressure and flow transmitters. MFM-ZP is especially suitable for low pressure ranges when requiring measurement around zero pressure with a maximum deviation less than +/- 0.1 Pa and flow measurement with MFS flow measurement probes down to about 0.5 m/s. The MFM-ZP consists of a solenoid valve with drive electronics that is mounted between the ...
Manufactured by:AB Micatrone based inSolna, SWEDEN
MTS-HT is an impulse connection kit that contains the required components for a dense and secure connection between the MFS flow measuring probe and the transmitter when the probe is mounted in channels with elevated ...
Manufactured by:AB Micatrone based inSolna, SWEDEN
Micatrone provides installation accessories such as impulse line (HT plastic tube), and fastening clips to obtain a connection between the measuring point and the transmitter. The HT-tube is especially selected and tested, as it is of the utmost importance for the function that the connection is tight so that no leakage can affect the ...
Manufactured by:AB Micatrone based inSolna, SWEDEN
Measuring value converter designed to convert pt-100 sensor resistance to load-independent output 4... 20 mA. The MO-3000 is intended for local installation near the sensor because the mA signal is significantly less interference sensitive when transmitting the measuring signal to control rooms or ...
Manufactured by:AB Micatrone based inSolna, SWEDEN
Micatrone motorized trotting valves are intended to be used as shut-off valves or regulating valves in cooling and heating systems with a maximum flow rate of 12 m/s. The valves are used in heating systems with micatrone's power selector ...
Manufactured by:AB Micatrone based inSolna, SWEDEN
MG-O2R both measures and regulates the O2 content of flue gases. MG-O2R measures o2 content and temperature in the flue gases as well as the temperature of the combustion air. Using the O2 content, flue gas temperature and the temperature of the combustion air, the fuel efficiency is ...
Manufactured by:AB Micatrone based inSolna, SWEDEN
The MG-4000-R2 is intended for measuring the O2 content of flue gases from oil burners, gas burners and biofuel boilers. The MG-4000-R2 can, together with a regulator, optimize the air/fuel ratio. As a result, the highest possible fuel efficiency can be achieved and also maintained over time regardless of changes in fuel and combustion ...
Manufactured by:AB Micatrone based inSolna, SWEDEN
The MMT-1000 is a max. temperature monitor used to break up the safety circuit of a boiler if the temperature in the supply line from the boiler exceeds a set cut-off limit. Type-approved maximum temperature monitor, certified for module ...
Manufactured by:AB Micatrone based inSolna, SWEDEN
The MS-35M actuator with torque converter MTS-70 is intended for controlling and regulating butterfly valves in hot water pipes. Connection with torque converter kit MTS-70 can be made against other makes of butterfly valve valves with top flange ISO 5211 and pipe dimension DN 50..200 mm depending on the valve torque. Micatrone also supplies complete valves with mounted MTT-series ...