- Home
- Equipment
Refine by
Nvent Environmental Equipment & Supplies
11 equipment items found
Manufactured by:nVent based inHouston, TEXAS (USA)
nVent Raychem 465 controller is a c-UL-us listed controller designed to freeze protect the fire sprinkler and fire protection piping per UL515A. This controller, as a part of the c-UL-us listed Raychem electric heat tracing system, provides an energy efficient, low installation cost and faster response solution than alternate methods such as dry systems or glycol systems. ...
Manufactured by:nVent HOFFMAN Management Company based inSt. Louis Park, MINNESOTA (USA)
The mild steel single door combinable floor standing enclosure range, MCS-HP, with a IP 66 protection degree offers a higher protection level for equipment and components which will help extend their lifetime and reduce maintenance costs when the enclosure is installed for rough environments with severe conditions.These new enclosures are rated as IP66 even if they are bayed using the standard ...
Manufactured by:nVent HOFFMAN Management Company based inSt. Louis Park, MINNESOTA (USA)
Concept Enclosures have streamlined styling, flush quarter-turn latches and an attractive, durable ...
Manufactured by:nVent based inHouston, TEXAS (USA)
nVent RAYCHEM XPI polymer insulated (PI) series trace heating cables provide freeze protection and process temperature maintenance on long transfer lines, vessels and instrumentation lines. XPI: up to 260°C continuous and 300°C intermittent exposure. Can be used in both hazardous and safe environments. ...
Manufactured by:nVent based inHouston, TEXAS (USA)
nVent RAYCHEM AMC-1B is a line-sensing thermostat designed to control heat tracing systems in non-hazardous locations. It senses pipe or tank wall temperatures, used to control a single heat tracing circuit or switch multiple circuits with a contactor, it has an adjustable set point. Also used to indicate low temperature or high temperature alarm ...
Manufactured by:nVent HOFFMAN Management Company based inSt. Louis Park, MINNESOTA (USA)
Use mild steel Concept Disconnect Enclosures in applications that require indoor and outdoor environmental protection and maintain stylized design features. Accepts major brand disconnect switches and circuit breakers and is supplied with an nVent HOFFMAN integrated tool to open ...
Manufactured by:nVent HOFFMAN Management Company based inSt. Louis Park, MINNESOTA (USA)
These general purpose disconnect enclosures accept major brand disconnect switches and circuit breakers, available with or without the nVent HOFFMAN supplied defeater door handle and handle hardware. Each Disconnect Enclosure with Handle, Type 12 is furnished with latch pivot post(s) and adjustable door interlock bracket fastened to door, cover latch bar for door, and instructions for ...
Manufactured by:nVent HOFFMAN Management Company based inSt. Louis Park, MINNESOTA (USA)
The mild steel single door combinable floor standing enclosure range, MCS, with a IP 55 protection degree, is available off the shelf in many different sizes. This enclosure range is well suited for many different applications. The risk for component failure, and with that unnecessary downtime, is eliminated as water and dust are prevented from entering the ...
Manufactured by:nVent HOFFMAN Management Company based inSt. Louis Park, MINNESOTA (USA)
Concept Enclosures are ideal for machine control applications. With streamlined styling, flush quarter-turn latches and an attractive, durable ...
Manufactured by:nVent HOFFMAN Management Company based inSt. Louis Park, MINNESOTA (USA)
Available with front or front and rear access, these Type 12 enclosures have sturdy unibody construction and flexible internal mounting options to provide panel and component mounting ...
Manufactured by:nVent HOFFMAN Management Company based inSt. Louis Park, MINNESOTA (USA)
These NEMA 3R rated electrical enclosures are suitable to house Electric Vehicle Inverters. These A30 Series electrical enclosures are available with front, or front and rear door access. The unibody construction and flexible internal mounting options provide panel and component mounting to handle heavy loads. These enclosures are made in the USA with US steel for EV Infrastructure ...