- Home
- Equipment
Refine by
Pewe Environmental Equipment & Supplies
30 equipment items found
Manufactured by:Process Engineered Water Equipment (PEWE) based inVancouver, WASHINGTON (USA)
The unique technology built into each PEWE G2-SEP Single Phase Plate Clarifier maximizes settleable solids removal while minimizing chemistry usage. The chassis and vessel are constructed of AISI 304SS. With the Tru Counter Flo plate pack and adjustable weir system the G2-SEP Single Phase Plate Clarifier operates with complete precision of the optional PEWE Command Control automated panel. A pipe ...
Manufactured by:Process Engineered Water Equipment (PEWE) based inVancouver, WASHINGTON (USA)
This lamella style plate settler is an excellent choice for efficient solids removal. The unique technology built into each PEWE G²-SEP GS Multi Phase Plate Clarifier maximizes settle-able solids removal while minimizing chemistry usage. The chassis and vessel standard construction is AISI 304SS. With the Tru Counter Flo plate pack and weir system, the G²-SEP GS Multi Phase Plate ...
Manufactured by:Process Engineered Water Equipment (PEWE) based inVancouver, WASHINGTON (USA)
The PEWE premier line of AugerConveyor AC units cover a wide range of flow capacities. The unique technology built into each AugerConveyor AC screw system maximizes solids throughput capacity. With the replaceable UHMW wear surface the AugerConveyor AC achieves excellent longevity. PEWE products and systems are designed in-house and produced under tight quality control. Support services are ...
Manufactured by:Process Engineered Water Equipment (PEWE) based inVancouver, WASHINGTON (USA)
The unique technologies built into each PEWE DeWater DBP Belt Filter Press is designed to maximize solids recovery while minimizing chemistry usage during sludge dewatering. Selection of the appropriate belt press system depends upon the sludge solids encountered. DeWater DBP Systems come with an array of belt options to meet your specific solids requirements. Each belt filter press has a wide ...
Manufactured by:Process Engineered Water Equipment (PEWE) based inVancouver, WASHINGTON (USA)
The PEWE DeWater CSP Compactor Screw Press consists of an auger screw assembly, transport tube, drainage section, press section, and mechanical drive system. It is supplied with a flanged inlet, flanged solids discharge, and a drainage fitting. The CSP is designed to extract moisture from wet solids. It accomplishes this by utilizing the auger screw to transport and compress the solids and allow ...
Manufactured by:Process Engineered Water Equipment (PEWE) based inVancouver, WASHINGTON (USA)
The TRU is designed to extract moisture from wet solids. The unit utilizes a screw to transport and compress the solids and allow the liquid to drain off. The PEWE DeWater TRU Truck Receiving Unit consists of an auger screw assembly, screen basket, transport tube, drainage section, press section, discharge section, tank housing, and mechanical drive system. The TRU is supplied with a flanged ...
Manufactured by:Process Engineered Water Equipment (PEWE) based inVancouver, WASHINGTON (USA)
The unique dissolved air flotation technology built into each Nx²JEM DAF system maximizes TSS removal while minimizing chemistry usage and sludge production. The chassis and vessel are constructed of AISI 304SS. The Nx²JEM features a Tru Counter Flo plate pack, ParaLam Weir system, integrated pipe flocculator and Rogue MAX RGT aeration. Additionally, the unit operates under the ...
Manufactured by:Process Engineered Water Equipment (PEWE) based inVancouver, WASHINGTON (USA)
The unique dissolved air flotation technology built into each T²-MAX DAF system maximizes TSS removal while minimizing chemistry usage and sludge production. The chassis and vessel are constructed of AISI 304SS. the T²-MAX features a traditional open style, ParaLam Weir system, integrated pipe flocculator and Rogue MAX RGT aeration. Additionally, the unit operates under the precision of ...
Manufactured by:Process Engineered Water Equipment (PEWE) based inVancouver, WASHINGTON (USA)
The PEWE PolyAccu Dose System is designed for efficient liquid chemical make down for water and wastewater treatment. The key to solution generation is the application of the correct mixing energy and time in the proper amount of water. By getting these three factors right with features such as the Active Blend Blade™ flash mixer, the PolyAccu Dose System ensures reliable chemical dosing. ...
Manufactured by:Process Engineered Water Equipment (PEWE) based inVancouver, WASHINGTON (USA)
The PEWE premier line of OWS Oil/Water Separator systems cover the full range of flow and removal possibilities. The unique technology built into each OWS Oil/Water Separator system maximizes free Oil and Grease (OG) removal without the need for chemistry. With the special coalescing media packs and integrated oil capture, the OWS Oil/Water Separator achieves excellent removal results of up to ...
Manufactured by:Process Engineered Water Equipment (PEWE) based inVancouver, WASHINGTON (USA)
The SuperSkreen SSI series maximizes solids removal in an easy to maintain unit. The screen is a barrier by which material larger than the gap or slot size may not pass, allowing the water to continue through. Internally-fed screen units are used for the removal of large insoluble material from an aqueous solution. Wastewater screens are used on process and wastewater streams for particles that ...
Manufactured by:Process Engineered Water Equipment (PEWE) based inVancouver, WASHINGTON (USA)
Parabolic screen units, sometimes referred to as “side hill”, are used for the removal of large insoluble material from an aqueous solution. Screens are used on process and waste water streams for particles that need to be removed to protect downstream systems. The screen can also be used for product recovery, large solids separation, and mixed settleable solids for both municipal ...
Manufactured by:Process Engineered Water Equipment (PEWE) based inVancouver, WASHINGTON (USA)
The PEWE SuperSkreen SSB bar screen is typically placed at the headworks (entrance) of a wastewater treatment plant. Bar screens are used to remove large objects such as rags, plastics bottles, wood, solids, toys and other debris from the waste stream before entering the treatment plant. The SuperSkreen SSB may be sized for wide variances in flow conditions such as both normal sanitary and storm ...
Manufactured by:Process Engineered Water Equipment (PEWE) based inVancouver, WASHINGTON (USA)
The ASO Alpha! MBBR moving bed bioreactor wastewater treatment system is a continuous flow design utilized for the reduction of soluble organics and nutrients. The key to the system is the US Patented media which provides a “home” for biological colonies of bacteria and protozoa to grow and flourish. The media are contained within the sub-grade serial tank system where they are ...
Manufactured by:Process Engineered Water Equipment (PEWE) based inVancouver, WASHINGTON (USA)
The ASO Bio-Carrier is an efficient media for moving bed biofilm reactor MBBR aerobic or anoxic applications. The plastic surface is specially designed to provide a suitable home for biological colonies of bacteria and protozoa to grow and flourish. The technology provides for a cylindrical self-sloughing flow through carrier. The MBBR method of treatment requires no sludge recycling or ...
Manufactured by:Process Engineered Water Equipment (PEWE) based inVancouver, WASHINGTON (USA)
The DeWater RDT internally fed rotary drum sludge thickener units are used to condense municipal sludge by extraction of free water. The unit is used to thicken both primary and secondary sludges commonly found in municipal wastewater treatment plants. The rotary drum sludge thickener can also be used on industrial sludge applications. The DeWater RDT Series Rotary Drum Thickener will maximize ...
Manufactured by:Process Engineered Water Equipment (PEWE) based inVancouver, WASHINGTON (USA)
The unique technology built into each PEWE HD²XLRator DAF system maximizes TSS removal while minimizing chemistry usage and sludge production. The chassis and vessel are constructed of AISI 304SS. With the Tru Counter-Cross Flo plate pack, ParaLam Weir system, integrated pipe flocculator and Rogue MAX RGT aeration, the HD²XLRator DAF operates by precise control of the PEWE Command ...
Manufactured by:Process Engineered Water Equipment (PEWE) based inVancouver, WASHINGTON (USA)
The unique patented technology (#8431022) built into each PEWE Dueler DAF system maximizes TSS removal while minimizing chemistry usage and sludge production. The innovative design allows for simultaneous pre and post biological treatment for insoluble TSS, FOG, BOD and other constituent removal in a single compact system. The Dueler DAF features a ParaLam Weir system, integral pipe ...
Manufactured by:Process Engineered Water Equipment (PEWE) based inVancouver, WASHINGTON (USA)
Simply put, the MAX TRS self-priming centrifugal pump offers high efficiency water transfer without clogging. MAX TRS close-coupled 316 stainless steel pump head produces high flow rats under low head conditions. It is especially designed for continuous low pressure circulation and transfer of non-flammable liquids, water, irrigation, spraying systems, and jockey pump service aggressive liquid ...
Manufactured by:Process Engineered Water Equipment (PEWE) based inVancouver, WASHINGTON (USA)
The unique dissolved air flotation technology built into each Poly-E² DAF system maximizes TSS removal while minimizing chemistry usage and sludge production. The chassis and vessel are constructed of AISI 304SS. The Poly-E² features a Tru Counter Flo plate pack, ParaLam Weir system, integrated pipe flocculator and Rogue MAX RGT aeration. Additionally, the unit operates under the ...