- Home
- Equipment
Refine by
Scanmatic Environmental Equipment & Supplies
11 equipment items found
Manufactured by:Scanmatic AS based inArendal, NORWAY
Navigation assistant for lifeboats Scanmatic Lifeboat Navigation Assistant (LNA) is an important aid for the lifeboat pilot during an evacuation. It provides navigation information the moment a free fall or conventional lifeboat hits the water. Traditionally, navigation systems in lifeboats does not provide trustworthy guidance away from the installation after an evacuation. The LNA brings user ...
Manufactured by:Scanmatic AS based inArendal, NORWAY
SMIO modules are used to increase the number of physical interfaces in IEDs from Scanmatic e.g. SM5049 or SM5059. SMIO-modules are available in different variants, with different physical interfaces, and they make it possible to tailor the system to the specific ...
Manufactured by:Scanmatic AS based inArendal, NORWAY
Fiber optic measurement method for measuring water levels in ponds. The solution is based on pressure sensor, long-life battery and an RS232 / fiber conversion mounted in a buoy. The buoy communicates via fiber cable to ...
Manufactured by:Scanmatic AS based inArendal, NORWAY
SM4441 is used in installations with gauge pressure sensors. It is important that water is not allowed to enter the pressure compensation capillary. This may damage the sensor. SM4441 consist of a desiccant breather, including silica gel to absorb the humidity, mounted on an aluminum bracket. A plastic tube is used to connect to the capillary of the pressure sensor. The dimension for the tubes ...
Manufactured by:Scanmatic AS based inArendal, NORWAY
SONCAT (The Sonar Calibration And Training buoy) is Scanmatic’s trademark for a portable buoy-based system for testing and calibrating naval ship sonar, as well as training sonar operators. The SONCAT system simulates sound from an underwater target, typically a submarine. The system consists of mainly two ...
Manufactured by:Scanmatic AS based inArendal, NORWAY
Scanmatic’s Sonar Transponder Module (STM) receives and analyzes audio signals from sonars, and generates an echo or emits pre-stored audio signals. In “echo repeat”, STM adds a signature to the received sonar pulse and sends back this modified audio pulse. For a sonar operator, it looks like there is a real submarine on the sonar ...
Manufactured by:Scanmatic AS based inArendal, NORWAY
The Vertical Line Array (VLA), is a system for recording, visualization and storing of underwater acoustic signals. The VLA is capable of continuously recording four acoustic signals, covering all frequencies from 30Hz to 100kHz. The system is capable of sample rates up to 384 kS/s on all four channels simultaneously. Acoustic signals are sampled with a resolution of 16 bits and are stored as ...
Manufactured by:Scanmatic AS based inArendal, NORWAY
SM4418 is a water level measurement system based on the bubbler principle, and it replaces the existing SM4416. The system is connected to a compressed air source with a pressure regulator, based on a compressor or compressed air cylinder, and a measurement tube or orifice. The measurement tube is installed between the bubbler system and the point of ...
Manufactured by:Scanmatic AS based inArendal, NORWAY
LF-300 is a complete system for testing and calibrating naval ship sonar, as well as training sonar operators. The system stands out by an extended acoustic frequency range, from 300 Hz to 100 kHz, thus well suited for wideband acoustics. To achieve this, the system consists of 7 transducers that can transmit simultaneously, each responsible for a sub-specter of the total frequency ...
Manufactured by:Scanmatic AS based inArendal, NORWAY
SM5059 is a datalogger optimized for data acquisition and remote control for meteorology, hydrology and environmental monitoring. The datalogger handles measurement in real time as well as historical values. Messages and alarms are handled in real time, with the option for time stamping and a historical buffer. Commands are handled in real time. SM5059 use the same working principles and software ...
Manufactured by:Scanmatic AS based inArendal, NORWAY
Scanmatics latest tool for data collection, data storage and presentation of historical or present value measurements, called H2, consists of a number of modules, which can be combined into a complete data collection system as needed. The system includes a rich functionality, covering everything from remote configuration of data loggers, to data collection and presentation of data. Present values ...