- Home
- Equipment
Refine by
Simflo Environmental Equipment & Supplies
6 equipment items found
Manufactured by:SIMFLO Pumps Inc. based inWillcox, ARIZONA (USA)
The discharge head shall be of ASTM A48, Class 30 Cast Iron or ASTM A53, grade B Fabricated Steel designed for above ground discharge with sufficient strength and rigidity to support the motor mounted on it and carry the suspended weight of the attached column and bowl assemblies. If fabricated steel, a radius or three-piece mitered type elbow shall be used for smooth transition. The discharge ...
Manufactured by:SIMFLO Pumps Inc. based inWillcox, ARIZONA (USA)
Simflo’s hilo series submersible pumps are some of the best on the market today. Their excellent engineering and robust construction, along with a wide range of operating capacities, ensures that there is a hilo series pump that will meet your demands and will offer you dependable, worry-free ...
Manufactured by:SIMFLO Pumps Inc. based inWillcox, ARIZONA (USA)
The motor stand shall be of ASTM A53, grade B fabricated steel designed with sufficient strength and rigidity to support the motor mounted on it and carry the suspended weight of the attached column and bowl assemblies. The design shall permit a two-piece head shaft to be coupled above the packing box. The bottom face of the motor stand shall be circular and fully ...
Manufactured by:SIMFLO Pumps Inc. based inWillcox, ARIZONA (USA)
The discharge head shall be of ASTM A48, Class 30 Cast Iron or ASTM A53, grade B Fabricated Steel designed for above ground discharge with sufficient strength and rigidity to support the motor mounted on it and carry the suspended weight of the attached column and bowl assemblies. If fabricated steel, a radius or three-piece mitered type elbow shall be used for smooth transition. The discharge ...
Manufactured by:SIMFLO Pumps Inc. based inWillcox, ARIZONA (USA)
Simflo's standard discharge head is cast of high grade iron, designed with the strength and rigidity to support the weight of a deep pump setting. Heads are provided with a discharge flange drilled to match 150lb ANSI connections. The bottom face of the discharge head is fully machined to allow for a level installation. Simflo's discharge heads are designed to allow for shaft coupling above the ...
Manufactured by:SIMFLO Pumps Inc. based inWillcox, ARIZONA (USA)
Simflo's discharge elbows are fabricated steel and are provided with a class 150 ANSI raised face flanges of the same diameter as the column pipe. The discharge elbow has an integral steel base drilled for flange mounting and lifting lugs of sufficient strength to lift the entire head, column pipe and pump/motor assembly safely for installation and servicing operations. A threaded connection is ...