- Home
- Equipment
Refine by
Applications
- Water Measurement Monitors for Monitoring Hydrocarbons in Bilge Water
- Water Measurement Monitors for Monitoring Oil in Cooling Water Sector
- Water Measurement Monitors for Monitoring Hydrocarbons in Wastewater
- Water Measurement Monitors for Monitoring Phenol in Water
- Water Measurement Monitors for Monitoring Fuels in Stormwater
- Water Measurement Monitors for Raw Water Intake Monitoring
- Water Measurement Monitors for Monitoring Hydrocarbon Leaks in Steam Condensate
- UV fluorescence technology for monitoring oil in power plant cooling water
- UV fluorescence technology for monitoring of phenol in water
- Water Measurement Monitors for Monitoring Gas Condensates
- Water Measurement Monitors for Monitoring Desalination Intake
- Monitoring petroleum hydrocarbons in wastewater
- Water Measurement Monitors for Monitoring Once Through Cooling Water
Tdhi Environmental Equipment & Supplies
14 equipment items found
Manufactured by:Benchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based inEdmonton, ALBERTA (CANADA)
Now available from Turner Designs Hydrocarbon Instruments, the Cuvette Caddy is the perfect accessory for sample analysis with the TD‑500D. This double-sided stainless steel accessory holds mini-cells, 8 mm cuvettes, sample well adapters and CheckPOINTTM solid standards. Using this holder greatly eases filling cuvettes and helps avoid spills and fouling. The top plate of ...
Manufactured by:Benchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based inEdmonton, ALBERTA (CANADA)
Turner Designs Hydrocarbon Instruments proudly announces the all new dual-channel TD-560 Oil in Water Analyzer. In addition to the optical channel found in the TD-550, suitable for crude and other heavy oils, the TD-560 adds a second channel for detecting lighter hydrocarbons, such as BTEX, gas condensates, gasoline, jet fuel, kerosene, transformer oils, styrene and phenol. The TD-560 offers a ...
Manufactured by:Benchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based inEdmonton, ALBERTA (CANADA)
Online water analyzers can be challenged by process upsets and unexpected conditions that push measurements out of range or foul the sensor. Because upset conditions can be short lived, they make it difficult to collect a ...
Manufactured by:Benchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based inEdmonton, ALBERTA (CANADA)
Solid Calibration Standards for the TD-500D, TD-3100, and TD-4100 Series Instruments. Instantly calibrate or check instrument performance without preparing liquid standards. Insert the CheckPOINT TM Solid Standard probe into the inspection port of your Turner Designs online oil in water monitor, or place it in the sample compartment of the lab instrument to check instrument calibration and ...
Manufactured by:Benchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based inEdmonton, ALBERTA (CANADA)
The TD-4100XD is a ruggedized version of the TD-4100 continuous online oil in water monitor. The XD is designed specifically for offshore oil production, refining, petrochemical, mining, and other industries that require robust online hardware for severe duty and hazardous area locations. The monitor is skid or wall mounted and constructed of 316 stainless steel. It also includes an external ...
Manufactured by:Benchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based inEdmonton, ALBERTA (CANADA)
The TD-4100XD General Purpose monitor is a lower cost version of the industry standard TD-4100XD and is designed for use in non-explosive atmospheres. It was designed for dirty water applications and uses our standard EZ Access noncontact flow cell for lower maintenance. Field validation is via our CheckPOINT™ solid calibration check ...
Manufactured by:Benchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based inEdmonton, ALBERTA (CANADA)
The TD-2500 combines ultrasonics and a time-tested insertion probe to offer the ultimate in early detection of high concentrations, or slugs, of oil in waste water. Ultrasonic technology measures oil at high concentrations, typically seen after oil/water separation, is sensitive to droplets, solids or gas bubbles and is easier to maintain than optical ...
Manufactured by:Benchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based inEdmonton, ALBERTA (CANADA)
Turner Designs Hydrocarbon Instruments is proud to introduce the new standard in grab sample oil in water analysis with the TD-550 oil in water analyzer. The TD-550 is suitable for crude oils and other heavy oils with a greatly enhanced detection range (low ppb to 5000 ppm) over most oil in water analyzers. Also new, the TD-560 includes the same optical channel of the TD-550 along with a second ...
Manufactured by:Benchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based inEdmonton, ALBERTA (CANADA)
After many years of successful service, the popular TD-3100 benchtop analyzer is no longer in production. The all new TD-550 and TD-560 have replaced the TD-3100 as benchtop analyzers. Turner Designs Hydrocarbon Instruments will continue to support the TD-3100 for spare parts and service. Please contact a sales representative or your local authorized dealer for more ...
Manufactured by:Benchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based inEdmonton, ALBERTA (CANADA)
The TD-4100XDC is a closed cell version of the rugged, world industry standard TD-4100XD Oil in Water Monitor. It was designed for normally clean water applications or dirty water applications where fouling can be controlled by chemical injection or optional onboard cleaning systems. It utilizes a clear tube flow cell to contain the sample water at pressure to prevent oxygen contamination in ...
Manufactured by:Benchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based inEdmonton, ALBERTA (CANADA)
The EZ Access falling stream flow cell for TD-4100 and TD-4100XD oil in water monitors provides easy access for window cleaning and emission filter change from the front of the monitor, without any disassembly. Customers enjoy all the benefits of our noncontact falling stream flow cell, plus pressure proof optical windows (100 psig) to prevent flooding in plugged drain ...
Manufactured by:Benchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based inEdmonton, ALBERTA (CANADA)
Most oilfield produced waters and other oily waste waters have high fouling potential for optical sensors. High cost ultrasonic cleaning systems only address the local optical path and not the entire sample system. Our clean-in-place (CIP) system addresses the entire sample system in the same way that CIPs are used to clean heat exchangers and other oily ...
Manufactured by:Benchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based inEdmonton, ALBERTA (CANADA)
The TD-4100XDC General Purpose oil in water monitor is a lower cost version of the industry standard TD-4100XDC and is designed for use in non-explosive atmospheres. It was designed for normally clean water applications, or dirty water applications where fouling can be controlled by chemical injection or optional onboard cleaning systems. It uses a clear tube flow cell to contain the sample water ...
Manufactured by:Benchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based inEdmonton, ALBERTA (CANADA)
The TD-120 Oil in Water Monitor, developed from more than 20 years of real-world experience with UV fluorescence technology, offers industry leading features. The online monitor is resistant to dirty or turbid water influences that typically impact UV absorption or light scatter instrument measurements—allowing hydrocarbons, fuels, lubricating oils, heat transfer fluids, and crude oil to be ...