- Home
- Equipment
Refine by
Tecnidro Environmental Equipment & Supplies
24 equipment items found
Showcase
Manufactured by:Tecnidro Srl based inGenova (GE), ITALY
The TIC12 controller represent the new generation of well-known TIC backflush controller produced by Tecnidro since ...
Premium
Manufactured by:Tecnidro Srl based inGenova (GE), ITALY
This valve protects pumps and pipes from pump startup and shutoff pressure surges due to power failure. Pump off means valve normally closed. If pump starting cause pressure surge, the pilot smoothly opens the valve to limit pressure ...
Premium
Manufactured by:Tecnidro Srl based inGenova (GE), ITALY
Tangential Water Meter, Cast iron body and metallic ...
Premium
Manufactured by:Tecnidro Srl based inGenova (GE), ITALY
The valve closes totally the pipe line when back flow occurs. The valve is complete with an hydraulic control circuit able to regulate operation's speed during closing, preventing ...
Premium
Manufactured by:Tecnidro Srl based inGenova (GE), ITALY
This valve controls water level in high level reservoirs to avoid overflow, without any external control system like float control etc. The valve remains completely open until the closing input is transmitted by the 3-ways piezometric altitude ...
Premium
Manufactured by:Tecnidro Srl based inGenova (GE), ITALY
The valve controls downstream flow to a pre-set and constant value in order to limit water consumptions and preserve pipeline fill rate or to set a maximum demand value. The valve is controlled by a differential hydraulic pilot that senses the pressure fall generated by water flow into a calibrated ...
Premium
Manufactured by:Tecnidro Srl based inGenova (GE), ITALY
Tangential water meter, cast iron body and technopolymer ...
Premium
Manufactured by:Tecnidro Srl based inGenova (GE), ITALY
Tangential Water Meter, Cast iron body and technopolymer ...
Premium
Manufactured by:Tecnidro Srl based inGenova (GE), ITALY
Hydrometer IER with Turning Joint and Oval Valve, Patent ...
Premium
Manufactured by:Tecnidro Srl based inGenova (GE), ITALY
Saving water resources is nowa priority objective in the management of distribution networks, but remains difficult to achieve without the support of specific and reliable automation technologies. With over 30 years of experience in the production of hydraulic equipment, TECNIDRO introduces to the market an innovative solution proposing HYDRONET system, based on the latest LPWAN radio ...
Premium
Manufactured by:Tecnidro Srl based inGenova (GE), ITALY
Available size: from DN100-4 up to DN250-10. TFM are flanged type magmeters with internal rubber lining, available for pipe size from DN100-4” up to DN250-10”. Operating priciple of TFM meters is based on electromagnetic induction Farady's law, assuring hig accuracy on flow rate measurement, even in the presence of muddy water. TFM meters are standard battery powered with external ...
Premium
Manufactured by:Tecnidro Srl based inGenova (GE), ITALY
The hydraulic value mod ING-EL is an automatic shut-off valve that allows to open and close the line, ensuring excellent reliability and versatility. The entire line of models has the option of having a manual flow controller or ...
Premium
Manufactured by:Tecnidro Srl based inGenova (GE), ITALY
Hydraulic valves backwash 3V Series, manufactured in Italy by Tecnidro, are specifically designed for batteries of sand or rings filters, manual or automatic type, used in agriculture irrigation, gardening and industrial ...
Premium
Manufactured by:Tecnidro Srl based inGenova (GE), ITALY
The valve opens fully or shuts off in response to electric signals. The valve is controlled by a solenoid that allows control liquid to flow in the upper chamber in order to close the main valve or, alternatively, drains upper chamber in order to open the main ...
Premium
Manufactured by:Tecnidro Srl based inGenova (GE), ITALY
Tangential water meter, cast iron body and metallic ...
Premium
Manufactured by:Tecnidro Srl based inGenova (GE), ITALY
Ultrasonic Water Meter. Available for pipes from DN50-2″ up to ...
Premium
Manufactured by:Tecnidro Srl based inGenova (GE), ITALY
The valve shall be made with high hydrodynamics section globe body, without stagnation pockets (conical, low pressure loss type), the main valve body and cover shall be made in standard ductile cast iron casting GJS500-7 and the valve body and cover shall be protected by 200° C furnace polyester resin powder painting with 150 micron of minimum guaranteed ...
Premium
Manufactured by:Tecnidro Srl based inGenova (GE), ITALY
Insertion ultrasonic water meter. Available size: from DN300-12″ up to ...