- Home
- Equipment
Refine by
Teledyne Environmental Equipment & Supplies
156 equipment items found
Showcase
Manufactured by:Teledyne Gas and Flame Detection based inArras Cedex, FRANCE
Full-range detection for emissions monitoring and utilities. Regulatory compliance and environmental protection demand accurate, continuous monitoring. MethaSense Trace meets those demands while reducing operational risk and maintenance ...
Premium
Manufactured by:Teledyne Gas and Flame Detection based inArras Cedex, FRANCE
Model DM-100 Series sensors feature intelligent electronics, non-intrusive operator interface and comprehensive fault diagnostics. The sensor is packaged in an electro-polished 316 stainless steel housing fitted with a ¾ inch NPT thread. The plug-in, field replaceable sensor cell features large surface area gold-plated pins that reduce the effects of corrosion in harsh industrial ...
Premium
Manufactured by:Teledyne Gas and Flame Detection based inArras Cedex, FRANCE
In industrial settings, leaks threaten both people and productivity. MethaSense XP delivers consistent performance in environments where maintenance access is ...
Premium
Manufactured by:Teledyne Gas and Flame Detection based inArras Cedex, FRANCE
The sensor electronics are completely protected and immune to water ingress and corrosion. The sensor elements are all plug-in components and can easily be replaced in the field. Operator interface is non-intrusive via a small handheld magnet. Configuration and routine calibration is intuitive and menu driven with fully scripted instructions. Sensor status is displayed on a built-in alphanumeric ...
Premium
Manufactured by:Teledyne Gas and Flame Detection based inArras Cedex, FRANCE
The SW-AV2-DV2E supplies two alarm lights with a sounder in a third party UL/cULus/ULc approved package. Utilizing Detcon’s wireless protocol allows use with Detcon’s family of wireless gas detection ...
Premium
Manufactured by:Teledyne Gas and Flame Detection based inArras Cedex, FRANCE
Designed for the detection of explosive gases, toxic gases or oxygen, this gas detector comes with a Wheatstone bridge output (OLC 100) or 4-20mA output (OLCT 100). Whatever your application Teledyne Gas and Flame Detection offers a solution: catalytic, electrochemical, semiconductor, or poison control version. ATEX approved, these detectors are available in explosion safe or intrinsically safe ...
Premium
Manufactured by:Teledyne Gas and Flame Detection based inArras Cedex, FRANCE
Infrared Gas Detector - 1 or 2 Points of Detection from a Single Head. The iTrans2 infrared gas detector employs an intelligent electronics platform to provide one or two points of detection from a single head for maximum flexibility, superior performance and lower installation costs. With the optional HART Communication Protocol, the iTrans2 offers remote diagnostics, set-up or calibration by ...
Premium
Manufactured by:Teledyne Gas and Flame Detection based inArras Cedex, FRANCE
The PS200 Series combines quality, ruggedness and advanced technology in a user friendly, portable gas monitor. It is compact, lightweight, water resistant, extremely robust, and is certified to multiple international and regional standards. The PS200 can measure any combination of LEL, O2, CO and H2S making it suitable for a wide range of personal monitoring and confined space ...
Premium
Manufactured by:Teledyne Gas and Flame Detection based inArras Cedex, FRANCE
Each system includes a tripod, network HMI, gas detection sensor(s), and alarm warning devices. An optional Sentinel SiteWatch provides remote access to system data via Ethernet or cellular communication. Power to the sensor assembly is supplied by a rechargeable Smart Battery Pack, disposable batteries or directly from HMI. Flexible and expandable, a Site Sentinel network can include up to 32 ...
Premium
Manufactured by:Teledyne Gas and Flame Detection based inArras Cedex, FRANCE
Model FP-700 is a non-intrusive "Smart" sensor designed to detect and monitor combustible gases in air over the range of 0-100% LEL using catalytic bead sensor technology. The plug-in, field replaceable detector is poison-resistant and features over-sized gold-plated connections that help prevent corrosion. The FP-700's rugged framework includes an electro-polished 316 stainless steel housing ...
Premium
Manufactured by:Teledyne Gas and Flame Detection based inArras Cedex, FRANCE
The GD10P Series has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from boiler plant rooms to offshore petrochemical installations. These GD10P infrared gas detectors differ from all other models, because they utilize silicon based solid-state infrared sources. The complete optomechanical design and ...
Premium
Manufactured by:Teledyne Gas and Flame Detection based inArras Cedex, FRANCE
Model CX sensors are equipped with standard analog 4-20mA, and Modbus RTU RS-485 outputs and can be used with SmartWireless Site Sentinel CX/CXT controllers. The CX is a very low power device making it an ideal choice for a battery powered detector (optional) in applications where power is unavailable or not economically feasible. CX gas detection sensors are easily and economically deployable ...
Premium
Manufactured by:Teledyne Gas and Flame Detection based inArras Cedex, FRANCE
Whether you are building a new facility or updating an existing one, there are a myriad of safety decisions to make. One decision, however, is now crystal clear. To best protect your workplace and employees, choose the 7800 Controller. Five simple function buttons make configuration and setup of the 7800 Controller easy and intuitive. Built-in programming flexibility allows you the ability to ...
Premium
Manufactured by:Teledyne Gas and Flame Detection based inArras Cedex, FRANCE
Designed by our customers, this robust and accurate gas detector provides unrivaled protection in confined space applications. The PS500 can be tailored to detect up to five gases with its toxic and catalytic sensors, photo ionisation detectors, and infrared capabilities. “Plug and Play” option allows the customer to “plug in” a new board with a different gas ...
Premium
Manufactured by:Teledyne Gas and Flame Detection based inArras Cedex, FRANCE
The OLCT 60 is a generation of high quality gas detectors which covers all industrial needs for a variety of applications. The OLCT 60 Series is composed of several versions: XP or IS sensor (toxic or oxygen versions). Remote or on-board sensor. The OLCT 60AD version allows the sensor to be installed remotely up to 15 meters (standard), allowing detection in inaccessible locations, or in Zone 0 ...
Premium
Manufactured by:Teledyne Gas and Flame Detection based inArras Cedex, FRANCE
The GD1 has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from offshore production facilities to wastewater treatment plants. At the heart of the detector is a tuneable laser diode that eliminates environmental effects from sun, rain and fog. The laser scans single absorption lines where there is no ...
Premium
Manufactured by:Teledyne Gas and Flame Detection based inArras Cedex, FRANCE
The 5-Way Charger is specifically designed for use with the PS200 Series portable gas detector. Simply plug it in and charge up to five units ...
Premium
Manufactured by:Teledyne Gas and Flame Detection based inArras Cedex, FRANCE
The OLC 10 and OLCT 10 are designed to detect combustible or toxic gases for tertiary applications (boiler plants, battery charging rooms, car parks, hospitals). Two OLC 10's can be connected to one detection channel to monitor the same area, without an additional junction box or extra wiring. Similarly, up to five OLCT 10's can be connected to one channel for the detection of CO, NO or NO2 in a ...
Premium
Manufactured by:Teledyne Gas and Flame Detection based inArras Cedex, FRANCE
The portable dual gas detector PS DUO is a handheld instrument designed for monitoring gas levels in potentially hazardous environments. ...
Premium
Manufactured by:Teledyne Gas and Flame Detection based inArras Cedex, FRANCE
Syntel is an addressable loop system suitable for use in zone 1 and 2 hazardous areas. The complete addressable loo is fault tolerant operating normally with a short or open circuit. Syntel does not have a CPU, so there is no common failure point. It includes a standard OPC interface and can also be supplied by Modbus allowing easy integration with third party systems. Syntel stores alarm and ...