- Home
- Equipment
Refine by
Whirled Environmental Equipment & Supplies
8 equipment items found
Manufactured by:Nasco based inFort Atkinson, WISCONSIN (USA)
Specially designed to hold any size bag, the holder uses a retainer ring to secure the bag firmly in place. Even in a fast flowing stream, the bag will not come loose. The adjustable fiberglass pole extends from 6 to 12 ft. (1.82 to 3.66 m), has a swinging end, and comes with three sizes of retainer rings to hold the ...
Manufactured by:Nasco based inFort Atkinson, WISCONSIN (USA)
An efficient and inexpensive way to sample water from any desired depth. The single-line trigger mechanism uses one line to both raise and lower the sampler as well as trigger the device to seal the collection chamber; you won’t have to worry about the problems of tangled lines. The efficient flow-through design of the sampler provides an ample 1.5 liter volume of water from which ...
Manufactured by:Nasco based inFort Atkinson, WISCONSIN (USA)
For hot fill samples with a temperature up to 215° F (102° C), the Whirl-Pak high temperature bag is specially made for this application. The FDA approved film is a co-extrusion of low density polyethylene and nylon that will hold liquids, solids, sauces, gravies, and other samples having a high temperature. The 18 oz. (532 ml) bag is self standing and does not need a rack or special ...
Manufactured by:Nasco based inFort Atkinson, WISCONSIN (USA)
Capacity is measured in fluid ounces when the bag is closed and tab is folded over three times. Volume and dimensions are approximate; bags should not be used at temperatures above 180° F (82° C). Bags can be frozen to any temperature, even liquid nitrogen - careful handling required after freezing. All bags are sterilized after ...
Manufactured by:Whirl-Air-Flow based inPrinceton, MINNESOTA (USA)
Whirl-Air Batch Blender/Transporters can handle a variety of dry materials in a wide range of particle sizes and densities. Pneumatic blending provides thorough, dust-free mixing with extremely low sheer and blend times of only two to five minutes. The unique Whirl-Air design uses dense phase pneumatic conveying to deliver the blended batch without segregation to one or more process areas. The ...
Manufactured by:Ball Tech Energy Ltd based inRosh HaAyin, ISRAEL
Ball Tech Energy’s sand filters have been developed especially for water filtration in contaminated water applications where sand grains adhere to each other and cause filter clogging. In such applications, simple backwashing of the grains has proven ineffective. In Ball Tech Energy’s patented filter, every single sand grain is washed as a single unit. Replacing the sand in the ...
Manufactured by:Whirl-Air-Flow based inPrinceton, MINNESOTA (USA)
Dense Phase is typical used to convey abrasive, fragile and friable material long or short distances. They are different types of dense phase conveying depending on the application, such ...
Manufactured by:United Equipment Technologies (UET) Mixers, Inc. based inMechanic Falls, MAINE (USA)
Series 2 static mixers feature UET’s whirled mixing elements, which are both bent and twisted. These mixing elements result in a shorter overall length than traditional static mixers, yet still provide terrific mixing performance. UET whirled elements are used in many industries, including chemical/petrochemical, oil & gas, food & beverage, water treatment, and more. Materials of ...