Carbolite Gero Ltd - part of Verder Scientific

- Model MTF - Wire Wound Single Zone Tube Furnaces

From

0

The MTF wire wound tube furnaces, like the larger diameter CTF range use a wire element that is wound directly onto a fixed integral ceramic work tube. This simple and economical design provides a furnace which can be used without the need to purchase an accessory work tube. However, should vacuum or a modified atmosphere be required, it is necessary to use a separate slide-in work tube in order to provide the required length needed to fit end seals. Similarly, in some circumstances a work tube that has different physical or chemical properties to the fixed work tube may be required. The use of an additional slide-in work tube protects the integral work tube and heating element.

  • 1000°C or 1200°C maximum operating temperature
  • 15 mm, 25 mm or 38 mm inner diameters
  • 130 mm, 250 mm, 400 mm or 850 mm heated length
  • Integral wirewound work tube
  • Carbolite Gero 301 controller, with single ramp to set-point & process timer
  • Delayed start / process timer function as standard
  • Horizontal configuration mounted on control module

  • Over-temperature protection (recommended to protect valuable contents & for unattended operation)
  • A range of additional work tubes, end seals and work tube packages is available for use with modified atmosphere
  • Insulation plugs & radiation shields to prevent heat loss & improve uniformity
  • Alternative mounting options are available
  • A range of sophisticated digital controllers, multi-segment programmers and data loggers is available. These can be fitted with RS232, RS485 or Ethernet communications

MTF 10/15/130
Max temp (°C): 1000
Max continuous operating temp (°C): 900
Dimensions: Fixed tube inner diameter (mm): 15
Dimensions: Heated tube length (mm): 130

MTF 10/25/130
Max temp (°C): 1000
Max continuous operating temp (°C): 900
Dimensions: Fixed tube inner diameter (mm): 25
Dimensions: Heated tube length (mm): 130

MTF 12/25/250
Max temp (°C): 1200
Max continuous operating temp (°C): 1100
Dimensions: Fixed tube inner diameter (mm): 25
Dimensions: Heated tube length (mm): 250

MTF 12/38/250
Max temp (°C): 1200
Max continuous operating temp (°C): 1100
Dimensions: Fixed tube inner diameter (mm): 38
Dimensions: Heated tube length (mm): 250

MTF 12/25/400
Max temp (°C): 1200
Max continuous operating temp (°C): 1100
Dimensions: Fixed tube inner diameter (mm): 25
Dimensions: Heated tube length (mm): 400

MTF 12/38/400
Max temp (°C): 1200
Max continuous operating temp (°C): 1100
Dimensions: Fixed tube inner diameter (mm): 38
Dimensions: Heated tube length (mm): 400

MTF 12/38/850
Max temp (°C): 1200
Max continuous operating temp (°C): 1100
Dimensions: Fixed tube inner diameter (mm): 38
Dimensions: Heated tube length (mm): 850

  • Heat-up time (mins): --
  • Dimensions: External H x W x D (mm): 430 x 900 x 375
  • Dimensions: Furnace body length (mm): 900
  • Uniform length ±5°C (mm): 500
  • Max power (W): 2800
  • Holding power (W)
  • Thermocouple type: N
  • Weight (kg): 24

Please note

  • Heat up rate when using an optional ceramic work tube must be limited to 5 °C/min
  • Heat up rate is measured to 100°C below max, using an empty tube & insulation plugs
  • Holding power is measured at continuous operating temperature
  • Uniform length ±5°C (mm): Uniform temperature lengths are measured with insulation plugs fitted
  • Maximum power and heat up times based on a 240V supply

Customer reviews

No reviews were found for Carbolite - Model MTF - Wire Wound Single Zone Tube Furnaces. Be the first to review!