Caterpillar - Model 926M -Aggregate Handler

Engine

Maximum Gross Power  153.0 hp
Bore  4.0 in
Stroke  5.0 in
Displacement  427.0 in3
Rated Net Power  148.0 hp
Engine Model  Cat® C7.1 ACERT™
Maximum Rated Gross Power: ISO 14396  153.0 hp
Maximum Rated Gross Power: ISO 14396 (DIN)  155.0 hp
Maximum Rated Gross Power – Maximum Engine Speed (Performance Power Mode: Range 1-4)  1800.0 rpm
Maximum Rated Gross Power – ISO 14396 (Performance Power Mode: Range 1-4)  153.0 hp
Maximum Rated Gross Power – ISO 14396 (DIN) (Performance Power Mode: Range 1-4)  155.0 hp
Rated Net Power at 1,800 rpm – SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)  148.0 hp
Rated Net Power at 1,800 rpm – ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance Power Mode: Range 1-4)  149.0 hp
Rated Net Power at 1,800 rpm – ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4)  151.0 hp
Maximum Gross Torque – ISO 14396 (Performance Power Mode: Range 1-4)  531.0 lbf-ft
Maximum Net Torque – SAE J1349 (Performance Power Mode: Range 1-4)  511.0 lbf-ft
Maximum Net Torque – ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode: Range 1-4)  517.0 lbf-ft
Maximum Rated Gross Power – Maximum Engine Speed (Standard Power Mode: Range 1-3*)  1600.0 rpm
Maximum Rated Gross Power – ISO 14396 (Standard Power Mode: Range 1-3*)  146.0 hp
Maximum Rated Gross Power – ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)  148.0 hp
Rated Net Power at 1,600 rpm – SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)  141.0 hp
Rated Net Power at 1,600 rpm – ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)  142.0 hp
Rated Net Power at 1,600 rpm – ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)  144.0 hp
Maximum Gross Torque – ISO 14396 (Standard Power Mode: Range 1-3*)  531.0 lbf-ft
Maximum Net Torque – SAE J1349 (Standard Power Mode: Range 1-3*)  511.0 lbf-ft
Maximum Net Torque – ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*)  517.0 lbf-ft
Emissions  Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Note  * Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Note  Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Note  No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Note  Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test).

Buckets
Bucket Capacities  2.5 m3 (3.3 yd3)

Weights
Operating Weight  28933.0 lb

Steering
Steering Cylinder: Double Acting – Bore Diameter  2.8 in
Steering Cylinder: Double Acting – Rod Diameter  1.6 in
Steering Cylinder: Double Acting – Stroke  17.2 in
Maximum Flow – Steering Pump  34.0 gal/min
Maximum Working Pressure – Steering Pump  3500.0 psi
Maximum Steering Torque – 0° (Straight Machine)  37155.0 lbf-ft
Maximum Steering Torque – 40° (Full Turn)  27747.0 lbf-ft
Steering Cycle Times (Full Left to Full Right) – Minimum RPM: Pump Flow Limited  2.8 seconds
Steering Cycle Times (Full Left to Full Right) – Maximum RPM: 90 rpm Steering Wheel Speed  2.4 seconds
Note  Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Note  Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Loader Hydraulic System
Maximum Flow – Implement Pump  40.0 gal/min
Maximum Flow – Implement Pump: 3rd Function Maximum Flow*  40.0 gal/min
Maximum Working Pressure – Implement Pump  3771.0 psi
Relief Pressure – Tilt Cylinder  4061.0 psi
Relief Pressure – Tilt Cylinder: 3rd Function Maximum Working Pressure  3771.0 psi
Relief Pressure – Tilt Cylinder: 3rd Function Relief Pressure  4061.0 psi
Lift Cylinder: Double Acting – Bore Diameter  4.3 in
Lift Cylinder: Double Acting – Rod Diameter  2.4 in
Lift Cylinder: Double Acting – Stroke  28.7 in
Tilt Cylinder: Double Acting – Bore Diameter  5.1 in
Tilt Cylinder: Double Acting – Rod Diameter  2.8 in
Tilt Cylinder: Double Acting – Stroke  21.9 in
Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Raise (Ground Level to Maximum Lift)  5.5/6.2 seconds
Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Dump (at Maximum Lift Height)  1.5/1.7 seconds
Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Float Down (Maximum Lift to Ground Level)  2.6/2.6 seconds
Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Total Cycle Time  9.6/10.5 seconds
Note  Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Note  Flow values listed are for a machine running in Performance Power Mode (1,800 rpm)
Note  * 3rd function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.

Service Refill Capacities
Fuel Tank  51.5 gal
Cooling System  7.9 gal
Engine Crankcase  5.3 gal
Transmission (Gear Box)  2.2 gal
Front Axles  5.5 gal
Rear Axles  5.5 gal
Hydraulic System (Including Tank)  42.3 gal
Hydraulic Tank  23.8 gal
Diesel Exhaust Fluid (DEF) Tank  5.0 gal

Transmission
Forward and Reverse: Range 1*  1-13 km/h (0.6-8 mph)
Forward and Reverse: Range 2  8.0 mph
Forward and Reverse: Range 3  17.0 mph
Forward and Reverse: Range 4  25.0 mph
Note  * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).

Cab
ROPS  ISO 3471: 2008, FOPS: ISO 3449: 2005 LEVEL II
Declared Sound Levels  – Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)* – Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*
Note  * Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.
Note  The Blue Angel environmental label is an optional attachment for Europe only.

Operating Specificatons
Full Turn Tip Load  17580.0 lb

Power Train
Front Axle  Fixed
Front Axle: Traction Aid**  Locking differential (standard)
Rear Axle  Oscillating
Rear Axle: Oscillation Angle by Tire Size – 17.5 R25  ± 13.5 degrees
Rear Axle: Oscillation Angle by Tire Size – 20.5 R25, 550/65, 600/65, 650/65  ± 10.5 degrees
Note  Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Rear Axle: Traction Aid (optional)  Limited slip differential
Brakes: Service  Inboard wet disc
Brakes: Park  Spring applied hydraulically released
Note  Offset rims available to meet European roading requirements.
Note  **Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 926M.

POWER TRAIN

• Axle seal guards
• Auto idle shut down feature
• Cat C7.1 ACERT engine: – Power Modes (Standard and Performance) – Power by Range (High Power in Range 4) – Turbocharged and aftercooled – Filtered crankcase breather – Diesel particulate filter (Fit for Life)
• Coolant protection to –34° C (–29° F)
• Differential lock in front axle
• Dry type air cleaner
• Enclosed wet disc full hydraulic brakes
• Fuel priming pump, automatic
• Fuel water separator
• Hydraulically driven demand cooling fan
• Intelligent hydrostatic transmission: – Power train modes – Directional Shift Aggressiveness – Rimpull control, adjust wheel torque – Creeper control, adjust ground speed
• Lubed for life driveshafts
• Parking brake, electric
• Wide spaced 6 fins per inch cooling package
• S·O·SSM sampling ports
• Throttle lock and maximum speed limiter

HYDRAULICS

• Automatic lift, lower and tilt kickouts
• Bucket and Fork Modes, adjustable in-cab
• Cylinder damping at kickout and end stops
• Fine Mode control in Fork Mode
• Hydraulic Response setting
• Load sensing hydraulics and steering
• Seat-mounted hydraulic joystick controls

ELECTRICAL

• Alternator, 115-amp, heavy duty
• 12V power supply in cab (2)
• Batteries, 1,000 CCA (2) 24 volt system
• Back-up alarm
• Emergency shutdown switch
• Heavy duty gear reduction starter
• Product Link PRO with subscription
• Remote jump start post
• Resettable main and critical function breakers

OPERATOR ENVIRONMENT

• 75 mm (3 in) retractable seat belt, with audible alarm and indicator
• Automatic temperature control
• Cab, enclosed and pressurized
• Cup holders
• External heated mirrors with lower parabolic
• Ground level cab door release
• Gauges: – Digital hour meter, odometer, tachometer, ground speed and direction indicator – Engine coolant temperature gauge – Fuel and Diesel Exhaust Fluid level – Hydraulic oil temperature gauge
• Hydraulic control lockout
• Interior cab lighting, door and dome
• Interior rearview mirrors (2)
• Lunch box storage
• Operator warning system indicators
• Radio ready speakers
• Rear window defrost, electric
• Seat-mounted controls, adjustable
• Sliding glass on the side windows
• Column mounted multi function control – lights, wipers, turn signal
• Suspension seat, fabric
• Tilt and telescopic steering wheel
• Wet arm wiper/washer, front and rear

OTHER STANDARD EQUIPMENT

• Large-access enclosure doors
• Parallel lift loader linkage
• Recovery hitch with pin
• Remote mounted lubrication points
• Lockable compartments and enclosures

926M Aggregate Handler Optional Equipment Antifreeze/coolant, extended-life
Auto lube, integrated in secondary display
Auxiliary flow, third function
Axles, differential, limited slip, rear
Axles, elevated breathers
Beacon light, strobe
Cab, deluxe (standard in Europe):

• Automatic blower control
• Electrically adjustable heated mirrors (2)
• LED interior lighting
• Secondary display to adjust settings

Ride control adjustable speed activation
Preventative maintenance reminders
Integrated help function (22 languages available)
Sunscreen, front and rear
Camera, rearview (standard in Europe)
Cold start package:

• Ether starting aid, block heater and additional batteries 1,000 CCA (4 in total)

Coupler, (Fusion and ISO 23727)
Debris packages (low, medium, high)
Fenders (extended cover and full coverage)
Guards

• Power train, (lower, side, driveshaft and crankcase)
• Windshield and lights
• Cylinders, tilt and steering

Lights, auxiliary, halogen or LED with engine compartment lights
Rear Object Detection
Radio packages:

• Radio ready with Bluetooth
• Radio, AM/FM with Bluetooth and clock
• Radio, AM/FM with CD player deluxe, weatherband, Bluetooth and clock

Seats:

• Deluxe seat – fully adjustable fabric air suspension seat with high seat backrest
• Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Heated and cooled bottom cushion and backrest.

Steering:

• Dual mode and Secondary

Tires:

• Bias ply, 17.5, 20.5-25
• Radial, 17.5, 20.5, 23.5, 550/65, 600/65, 650/65 R25

Work tools