- Home
- Companies
- Idroelettrica S.p.a.
- Products
- Centrinorm - Centrifugal Electric ...
Centrinorm - Centrifugal Electric Pumps, Base-Mounted
Idroelettrica`s Centrinorm centrifugal electric pumps are designed for a range of applications including civil, industrial, and agricultural uses. These pumps are constructed to meet EN 733 standards and are available with high-efficiency IE2 motors for power up to 5.5 kW and IE3 motors for higher power requirements. The pump`s body is made from G25 cast iron and normalized according to UNI standards, allowing for motor replacement without detaching the pump body from the system piping. The design enables the pumping of clean, non-abrasive, and chemically non-aggressive liquids. Suitable for a wide array of uses such as water distribution, heating, air conditioning, irrigation, and even fire-fighting systems, these pumps are built on a robust painted steel section base frame. Specialized configurations and sealing systems can be provided for specific applications and liquids.
Normalized base-monted electric pumps
- Power supply Three-phase 400V
- Construction according to EN 733
- IE2 high-efficiency motors up to 5.5 kW and IE3 for higher powers
Single-impeller base-coupled centrifugal electric pump coupled via a flexible coupling to an asynchronous motor of closed construction with IE2 high-efficiency external ventilation both assembled on thick painted steel section base frame.
Pump body normalized according to UNI standards. The motor can be replaced without removing the pump body from the system piping.
Standard construction is cast iron G25 UNI 5007. other construction metallurgies are available upon request.
- For civil, industrial and agricultural applications: water distribution systems, irrigation, fountains and water features, construction, etc.
- Also suitable for recirculation, heating, air conditioning and circulation systems in general, fire-fighting pumping stations and pressurization systems in general. Suitable for pumping clean water without abrasive particles and chemically nonaggressive liquids.
- It is possible to supply pumps with set-ups (metallurgy and sealing systems) for special applications and liquids.
- Pump body = Cast iron
- Motor mount = Cast iron
- Impeller = Cast iron
- Shaft = Stainless steel AISI 431
- Mechanical Seal = Ceramic/Graphite
- Maximum Temperature: Liquid -15°C ÷ +120°C
- Ambient + 40°C
- Maximum Pressure: 10 Bar
- Motor: Asynchronous 2 or 4 poles, C.I. F, IP 55
- Shopping centers
- Hospitals
- Facilities
- Industries
- Hotel
- Residential
- Cinemas and theaters
- Schools