CETCO - Model PM-100 Z -Granular Filtration Media

• Pump and treat filtration

• Lowers overall operating cost relative to utilizing activated carbon
• As a pre-treatment, extends life and absorbency of activated carbon by removal of larger molecular organics
• Accommodates increases in flow rates and contaminant concentration levels
• Provides a "fail-safe" method to prevent oil contamination
• Non-hazardous
• Operates in standalone mode for treatment of oil contaminated waters or stream condensates

Characteristics

• Appearance Tan Granules
• Specific Gravity 2.3 - 2.5
• Bulk Density 54 - 56 lbs/ft3
• BTU Value of Spent Media > 2,000 BTU/lb
• Solubility in Water Negligible
• Melting Point 1400°F

Particle

• Micron 500 - 1,000

• Influent waste stream must be free of suspended solids
• Load the vessel with a minimum of 2 ft (0.6 m) of PM-100 Z
• Leave a minimum of 15% - 20% head space to allow for expansion of media during back flush
• Fill the vessel with freshwater and back flush vessel (up-flow) for 30 ± 2 minutes to remove fines and eliminate entrained air from the bed
• After back flush, do not drain vessel. The vessel is now ready for down flow operation.

• Liquid Filtration Vessels with under-drainage systems (laterals or screens should be smaller than 0.0165 inches [0.42 mm])

• 50 lb bags
• 2,000 lb bags