CETCO

170 products found

CETCO Products

  • Building Materials - Waterproofing - Coreflex

  • COREFLEX - Thermoplastic Waterproofing Membrane with Active Polymer Core (APC)

    COREFLEX - Thermoplastic Waterproofing Membrane with Active Polymer Core (APC)

    Setting the standard for waterproofing membrane strength, durability and performance for more then 50 years. COREFLEX consists of a thermoplastic membrane integrally bonded to a proprietary Active Polymer Core (APC) layer. Combined with fully welded seams, this provides the ultimate waterproofing protection. Whether your project requires foundation waterproofing, plaza deck restoration, or green roof construction, COREFLEX provides superior...

  • Cetseal - Sealant/Adhesive

    Cetseal - Sealant/Adhesive

    CETSEAL is a multi-purpose, single component polyether moisture cure sealant/adhesive. CETSEAL is a low VOC, 100% solids, non-shrinking product with excellent UV resistance.

  • Corecap - Tie-Back Covers

    Corecap - Tie-Back Covers

    Preformed non-reinforced thermoplastic flashings, designed to provide a welded thermoplastic cover over tie-back heads on property line shoring walls; three preformed sizes available. CoreCap(s) used in conjunction with same size rigid TB-Boot.

  • Coreclad - Thermoplastic Coated Stainless Steel Clad Metal Flashing

    Coreclad - Thermoplastic Coated Stainless Steel Clad Metal Flashing

    CORECLAD is a 24 ga. (0.61 mm) stainless steel sheet laminated with a 20 mil (0.50 mm) thick UV stable thermoplastic coating integrally bonded to one side. The thermoplastic coating is compatible with CoreFlex and CoreFlash membranes thus allows for thermoplastic welding to form a monolithic barrier. CORECLAD is also resistant to most forms of fungus, algae and micro-biological attack.

  • Coredisc - T-Joint Disc

    Coredisc - T-Joint Disc

    COREDISC is a nominal 100 mm (4”) round x 1.5 mm (60 mil) thick non-reinforced thermoplastic disc. COREDISC is also resistant to most forms of fungus, algae and micro-biological attack.

  • Coreflash - Model 60-MIL - Reinforced Flashing Membrane

    Coreflash - Model 60-MIL - Reinforced Flashing Membrane

    COREFLASH 60 is a nominal 60 mil (1.5 mm) thick reinforced thermoplastic flashing membrane with excellent tear and puncture resistance. Membrane is dual color with yellow thermoplastic top coat and black bottom coat. COREFLASH 60 is also resistant to most forms of fungus, algae and microbiological attack. Available in 54” x 50’ (1.4 m x 15.2 m) rolls.

  • Coretex - APC Waterproofing Geotextile

    Coretex - APC Waterproofing Geotextile

    CORETEX is a unique low permeable, hydrophilic waterproofing product that utilizes an Active Polymer Core (APC) technology that is less permeable and more chemically resistant than traditional active waterproofing membranes.

  • Coreflex - Universal Corner

    Coreflex - Universal Corner

    A molded non-reinforced thermoplastic flashings used to seal inside and outside corner details. Universal Corners come as one piece and are trimmed to fit the appropriate corner condition.

  • Building Materials - Waterproofing - Ultraseal AB

    ULTRASEAL AB waterproofing membrane is the next generation of the popular ULTRASEAL waterpoofing system. Incorporating a new pressure-sensitive layer, the enhanced ULTRASEAL AB waterproofing membrane bonds tenaciously to concrete to prevent water migration. ULTRASEAL AB waterproofing membrane bonds once concrete is poured against its membrane surface. Unlike other adhesive-bonding membranes, its active APC waterproofing layer self-seals small punctures and tears commonly caused during constr

  • Ultraseal - Model AB - APC Waterproofing Membrane with Advanced Bond Coating

    Ultraseal - Model AB - APC Waterproofing Membrane with Advanced Bond Coating

    ULTRASEAL AB is the next generation of the popular ULTRASEAL waterpoofing system. Incorporating a new pressure-sensitive layer, the enhanced ULTRASEAL AB bonds tenaciously to concrete to prevent water migration. ULTRASEAL AB bonds once concrete is poured against its membrane surface. Unlike other...

  • Bentoseal - Trowel-Grade Sodium Bentonite Sealant

    Bentoseal - Trowel-Grade Sodium Bentonite Sealant

    A trowel-grade bentonite-based mastic that is used to detail at membrane terminations, around penetrations, over grouted concrete form-tie holes, and provide fillets to inside wall corners. Unlike most mastics, this premium mastic is capable of swelling and self-sealing upon hydration and is VOC compliant. Bentoseal can be covered with a waterproofing membrane immediately after application.

  • Envirosheet - Sheet Membrane Waterproofing

    Envirosheet - Sheet Membrane Waterproofing

    ENVIROSHEET membrane is supplied in 200 square foot rolls, 36” (914 mm) wide by 66.7’ (20.3 m) long. The rubberized asphalt is covered with release paper which is removed prior to installation. The membrane is cold-applied and self-adheres to a properly prepared and primed substrate. A cold-weather version.

  • Hydrobar Tubes - Granular Sodium Bentonite in Water-Soluble Tubing

    Hydrobar Tubes - Granular Sodium Bentonite in Water-Soluble Tubing

    HYDROBAR TUBES are a detailing accessory product for CETCO Waterproofing Systems used at the footing/wall junction to provide additional waterproofing protection. HYDROBAR TUBES consist of a thin, watersoluble tubing filled with granular sodium bentonite. When wetted, the tubing dissolves, allowing the bentonite to hydrate and form into a dense, low permeable material that combines with the sodium bentonite in the VOLCLAY S ystem p roducts. E ach H...

  • CETCO Seamtape - Multi-Purpose Joint Tape

    CETCO Seamtape - Multi-Purpose Joint Tape

    A single-sided tape consisting of an aggressive rubber-based adhesive with a durable polyethylene backing. Seamtape is primarily used to seal the overlap seams for both backfilled foundation walls and horizontal deck applications. Seamtape protects the overlap seams against debris intrusion during backfill and damage from rain prior to backfilling. Available in 3” (75 mm) x 50-Ft (15.2 m) rolls; 8 rolls per case.

  • Waterstoppage - Granular Sodium Bentonite

    Waterstoppage - Granular Sodium Bentonite

    WATERSTOPPAGE is chemically treated, granular sodium bentonite used as a detailing accessory product for CETCO Waterproofing Systems. When wetted, WATERSTOPPAGE forms into a dense, low permeable material that combines with the sodium bentonite in the waterproofing products to form a seamless waterproofing membrane. Mineralogical composition of WATERSTOPPAGE is a minimum 90% Montmorillonite with a maximum 10% native sediments and unaltered volcanic...

  • Building Materials - Waterproofing - Ultraseal XP

  • Ultraseal - Model XP - Active Polymer Waterproofing Membrane

    Ultraseal - Model XP - Active Polymer Waterproofing Membrane

    Featuring XP technology, the latest innovation in active waterproofing, ULTRASEAL XP provides exceptional performance in a wide range of ground contaminates. Proven effective in both hydrostatic and non-hydrostatic conditions, the self-sealing ability of ULTRASEAL XP seals minor cuts or damage to the membrane.

  • SEAL-X - Model XP - Active Polymer Trowel-Grade Sealant

    SEAL-X - Model XP - Active Polymer Trowel-Grade Sealant

    A trowel-grade mastic designed for a variety of surface preparation and detailing work with CETCO active waterproofing membranes. Featuring XP Technology hydrophilic polymer, SEAL-X XP swells upon contact with water to form a watertight barrier in fresh to high-saline water conditions. With the consistency of thick grease, SEAL-X XP is easy to apply and bonds to most building materials. Available in 25kg (5 gallon) pails.

  • Waterstop - Model XP - Synthetic Hydrophilic Polymer Based Strip

    Waterstop - Model XP - Synthetic Hydrophilic Polymer Based Strip

    The next generation of waterstop that expands upon contact with water to form a positive seal to stop water ingress through cast-in-place concrete construction joints and around pipe penetrations. Through the use of the patented XP technology, WATERSTOP XP is proven effective in a wide range of contaminated environments.

  • Building Materials - Waterproofing - Voltex DS

  • Voltex - Proven Waterproofing Membrane

    Voltex - Proven Waterproofing Membrane

    VOLTEX is a proven waterproofing membrane ideal for vertical and horizontal foundation surfaces. VOLTEX incorporates the high-swelling and self-sealing properties of VOLCLAY sodium bentonite to form a monolithic, low permeable membrane to protect the structure from water ingress.

  • VOLTEX - Model DS - Bentonite-Geotextile Waterproofing Membrane

    VOLTEX - Model DS - Bentonite-Geotextile Waterproofing Membrane

    Bentonite-Geotextile Waterproofing With Integrated Polyethylene Liner. All the benefits of VOLTEX, plus added protection. The Voltex DS composite is comprised of two high strength geotextiles making it suitable for projects that require more durability or additional chemical resistance. Its composite construction resists damage from tradesman installing reinforcing steel over it and inclement weather. With the durability of the needle-punched...

  • Voltex - Model DSCR - Waterproofing Composite of High Strength Geotextiles

    Voltex - Model DSCR - Waterproofing Composite of High Strength Geotextiles

    VOLTEX DSCR is a highly effective waterproofing composite of high strength geotextiles,1.10 pounds of contaminant resistant sodium bentonite per square foot, and a integrally bonded polyethylene liner. The high swelling, low permeable, contaminant resistant sodium bentonite is encapsulated between the two geotextiles.

  • Building Materials - Waterproofing - Voltex

  • Voltex - Bentonite-Geotextile Waterproofing System

    Voltex - Bentonite-Geotextile Waterproofing System

    The world’s leading Bentonite-Geotextile Waterproofing System. More than 50 years of proven performance. Designed for both vertical and horizontal foundation surfaces, VOLTEX incorporates the high-swelling and self-sealing properties of VOLCLAY sodium bentonite to form a monolithic, low permeable membrane to protect the structure from water ingress. VOLTEX contains zero VOCs and can be installed on green concrete in almost any weather...

  • TB-Boot - Tie-Back Covers

    TB-Boot - Tie-Back Covers

    TB-BOOTS are specially designed tieback covers used to maintain waterproofing integrity at soil retention tieback heads. TBBOOT is a single piece, durable pre-formed thermoplastic cover that provides a simple and quick waterproofing installation detail. TB-BOOTS are used with various CETCO waterproofing membrane systems including Voltex, Ultraseal and COREFLEX.

  • Building Materials - Waterproofing - Envirosheet

  • Envirosheet - Self-Adhering Sheet Membrane Waterproofing

    Envirosheet - Self-Adhering Sheet Membrane Waterproofing

    A composite sheet waterproofing membrane, ENVIROSHEET provides an easy means of installing a uniformly thick waterproofing membrane on both horizontal and vertical surfaces to protect against the infiltration of water. ENVIROSHEET is produced at a factory controlled thickness to provide a uniform 60-mil (1.5 mm) application and consists of 56-mils of rubberized asphalt and a 4-mil cross-laminated, polyethylene carrier film. The two components are...

  • Model M-2000 - Liquid Flashing

    Model M-2000 - Liquid Flashing

    A single-component, trowel-grade moisture cured polyurethane mastic, M-2000 LIQUID FLASHING is used with CETCO Waterproofing Systems to detail primarily at membrane terminations, around horizontal deck penetrations and transitions, over grouted concrete form-tie holes, and provide fillets to inside wall corners. Available in 18.9 Liter (5-gallon) pails.

  • Waterstop - Model RX - Flexible Strip Concrete Construction Joint

    Waterstop - Model RX - Flexible Strip Concrete Construction Joint

    An active, flexible strip concrete construction joint waterstop, WATERSTOP-RX provides a strong positive seal by expanding upon contact with water. Proven effective on projects worldwide for over 20 years, WATERSTOP-RX is designed for both continuous and intermittent hydrostatic conditions. WATERSTOP-RX is available in multiple configurations.

  • Building Materials - Waterproofing - Hydrofix

  • Hydrofix - Fluid-Applied Waterproofing Membrane

    Hydrofix - Fluid-Applied Waterproofing Membrane

    A single component, moisture-activated, elastomeric waterproofing membrane. HYDROFIX is cold fluid-applied and cures to form a seamless membrane that is positively bonded to the substrate. HYDROFIX is typically applied by roller or squeegee. Its fluid application allows it to be installed at difficult areas such as around multiple pipe penetrations and over irregular substrates.

  • Hydrofix - Single Component Waterproofing System

    Hydrofix - Single Component Waterproofing System

    A 100% Solids Fluid-Applied, HYDROFIX is a single component waterproofing system. Its fluid application allows it to be installed at difficult areas such as around multiple pipe penetrations and over irregular substrates and cures to form a seamless membrane that is positively bonded to the substrate.

  • Building Materials - Waterproofing - LDC 60

  • Model LDC 60 - Fluid Applied Waterproofing Membrane

    Model LDC 60 - Fluid Applied Waterproofing Membrane

    A elastomeric waterproof membrane, LDC 60 cures to form a seamless barrier that forms tenacious bond to concrete to prevent lateral water migration. The inherent toughness and elasticity of LDC 60 enables it to bridge small structural or shrinkage cracks which may develop in the substrate.

  • Model LDC 60 - Cold Fluid-Applied Polyurethane Waterproofing

    Model LDC 60 - Cold Fluid-Applied Polyurethane Waterproofing

    A single component, moisture cure modified polyurethane waterproofing membrane. LDC 60 is cold fluid applied and cures to form a seamless, elastomeric membrane that is positively bonded to the substrate. LDC 60 provides a quick and easy means of installing a cold fluid applied waterproofing membrane on both horizontal and vertical surfaces to protect against the infiltration of water. Its fluid application allows it to be installed at difficult areas,...

  • Building Materials - Waterproofing - Strataseal HR

  • Strataseal - Model HR - Rubberized Asphalt Waterproofing System

    Strataseal - Model HR - Rubberized Asphalt Waterproofing System

    A flexible, self-sealing, hot-applied, rubberized asphalt waterproofing system. STRATASEAL HR combines decades of membrane polymer experience and advanced mineral enhancement technology into a 100% solids thermoplastic product that is flexible as well as self-sealing. In the unlikely event of damage to the membrane, the advanced adhesion properties of STRATASEAL HR limit lateral water migration to the damaged area. STRATASEAL HR is ready for use and...

  • Stratabond - Model 100 - Reinforcement Fabric

    Stratabond - Model 100 - Reinforcement Fabric

    A 1.5-oz/sq-yd high strength, spun bonded polyester fabric used as a reinforcing layer with STRATASEAL HR hot-applied rubberized asphalt membrane. Stratabond 100 maintains its physical properties when wet and dimensionally stable over varying humidity levels and exhibits high resistance to splitting and cracking from thermal shock.

  • Building Materials - Waterproofing - Swelltite

  • Model A-3000WB - Water-Based Adhesive for Swelltite Membrane

    Model A-3000WB - Water-Based Adhesive for Swelltite Membrane

    A water-based latex adhesive used primarily to secure the Swelltite membrane in both vertical and horizontal applications. The product is VOC compliant and changes from a light gray to dark gray upon application. Waterproofing membrane is installed to adhesive after it turns to dark gray color. Available in 18.9 Liter (5-gallon) pails.

  • Model SB-100 - Solvent-Based Contact Adhesive

    Model SB-100 - Solvent-Based Contact Adhesive

    A solvent-based contact adhesive, designed for bonding CoreFlash membranes to approved horizontal and vertical substrates. Adhesive SB-100 is easy to apply by roller, brush or spraying and has high initial tack strength and excellent heat resistance. Adhesive SB-100 is packaged in 5 gallon (18.9 liter) pails.

  • Swelltite - Composite Bentonite Waterproofing System

    Swelltite - Composite Bentonite Waterproofing System

    A highly effective waterproofing membrane, SWELLTITE consists of a sodium bentonite compound integrally bonded to a geomembrane liner. This composite combines the active waterproofing benefits of sodium bentonite with the strength and durability of a thick geomembrane liner.

  • SWELLTITE - Composite Bentonite Waterproofing System

    SWELLTITE - Composite Bentonite Waterproofing System

    Combining the active waterproofing benefits of sodium bentonite with the strength and durability of a thick geomembrane liner. Unlike other membrane systems that require precise installation, SWELLTITE’s reactive bentonite compound can expand to seal small punctures in the membrane. SWELLTITE works by forming a continuous membrane upon hydration with water. When confined under pressure, the swell is controlled, forming a dense, positive seal...

  • Building Materials - Waterproofing - T-Series

  • Model T-Series - Tunnel Waterproofing Membranes

    Model T-Series - Tunnel Waterproofing Membranes

    The T-series thermoplastic waterproofing membranes are specifically designed for tunnel projects. They have excellent puncture and elongation properties and are resistant to root penetration and micro-organisms.

  • Building Materials - Drainage - Aquadrain

  • Aquadrain - Model 15X - Subsurface Drainage Composite

    Aquadrain - Model 15X - Subsurface Drainage Composite

    A two-part prefabricated sheet drain composite consisting of a 3-dimensional polypropylene formed dimple core covered with a non-woven polypropylene filter fabric on one side. The formed dimple core provides compressive strength and collects water for flow to drainage discharge pipes.

  • Aquadrain - Model 15XP - Subsurface Drainage Composite

    Aquadrain - Model 15XP - Subsurface Drainage Composite

    A three-part prefabricated sheet drain composite consisting of a 3-dimensional polypropylene formed dimple core covered with a non-woven polypropylenefilter fabric bonded to one-side and a polymeric film bonded to the other. The formed-dimple core provides compressive strength and collects water for flow to drainage discharge pipes.

  • Aquadrain - Model 30H - Subsurface Drainage Composite

    Aquadrain - Model 30H - Subsurface Drainage Composite

    A two-part prefabricated sheet drain composite consisting of a 3-dimensional polypropylene formed dimple core covered with a woven polypropylene filter fabric bonded to oneside. The formed-dimple core provides compressive strength and collects water for flow to drainage discharge pipes.

  • Aquadrain - Model G20 - Subsurface Drainage Composite

    Aquadrain - Model G20 - Subsurface Drainage Composite

    A two-part prefabricated drainage composite consists of a high strength HDPE geonet core with a non-woven polypropylene filter fabric bonded to both sides. AQUADRAIN G20 is designed for horizontal and vertical applications requiring very high compressive strength with low to moderate flow properties.

  • Aquadrain - Model GS25 - Subsurface Geonet Drainage Composite

    Aquadrain - Model GS25 - Subsurface Geonet Drainage Composite

    A three-part prefabricated drainage and protection composite consisting of a high strength HDPE geonet core with nonwoven polypropylene filter fabrics bonded to both sides. AQUADRAIN G25 is designed for horizontal and vertical applications requiring very high compressive strength properties with low to moderate flow properties.

  • Building Materials - Drainage - Green Roof Solutions

  • Greenscapes - Aluminum Edging

    Greenscapes - Aluminum Edging

    Made of slotted, 0.1 inch thick unfinished aluminum and engineered to allow free flow of water during even the most intense rain events. Aluminum Edging is available for both straight and flexible, curvilinear applications in one inch incremental vertical leg sizes ranging from 3.5 inches to 8.5 inches. Custom sizes are also available.

  • Greenscapes - Model GS-110 - Root Barrier

    Greenscapes - Model GS-110 - Root Barrier

    A .25mm thick, single-ply polyethylene sheet used extensive GreenScapes assembly. GS-110 can also be used in deeper assemblies where no woody species are to be planted.

  • Greenscapes - Model GS-300 - Drainage Mat

    Greenscapes - Model GS-300 - Drainage Mat

    A Drainage Composite consists of a polypropylene drainage core of fused, entangled filaments and a non-woven polypropylene filter fabric bonded to the top side. The entangled filaments are molded into a square waffle pattern that maintains this flexible design.

  • Greenscapes - Model GS-310 - Drainage Mat

    Greenscapes - Model GS-310 - Drainage Mat

    A stormwater retention and drainage composite product consisting of a 3-dimensional polystyrene formed dimple core providing compressive strength to support subsequent layers. The formed dimple core retains stormwater but allows excessive stormwater to drain through drainage holes in the top of the drain board.

  • Greenscapes - Model GS-404 - Filter Fabric

    Greenscapes - Model GS-404 - Filter Fabric

    A non-woven geotextile allowing drainage of stormwater from the growing media to the water management layer. In addition to retaining the fines of the growing media, it provides excellent laminar flow.

  • Greenscapes - Model GS-500 Series - Growing Media

    Greenscapes - Model GS-500 Series - Growing Media

    GS-500, GS-505, GS-510 are lightweight engineered growing media blends for green roofs. Each consists of a uniform distribution of aggregate grain sizes and organic materials producing consistent color, structure and texture that allows the media to maintain specified aeration, water permeability, erosion resistance and root penetration.

  • Greenscapes - Inspection Chamber

    Greenscapes - Inspection Chamber

    Designed to provide accessible covers for roof mounted drains, Inspection Chambers help to prevent debris from entering the drains and cutting off light to prevent the potential for plants to grow into the drains.

  • Greenscapes - Bulk Sedum Cuttings for Extensive Greenroofs

    Greenscapes - Bulk Sedum Cuttings for Extensive Greenroofs

    GreenScapes Bulk Sedum Cuttings are ½ - 2 ½ inch long spontaneously rooting stems available in a wide variety of sedums suitable for low-cost planting of extensive green roofs, over planting of plug installations, repair of damaged areas and filling in of sparse areas on extensive green roofs.

  • Building Materials - Waterstops & Expansion Joints

    Waterstops with expansion capabilities that not only provide better seals, but can fill voids and seals cracks. The broad product range and installation versatility of our waterproofing systems allow you to work with a single manufacturer to cover all of your waterproofing needs. From zero-lot property line construction to backfilled foundation walls to under slab and plaza deck application, CETCO has the waterproofing solution that fit your need.

  • AKWASTOP - Hydrophilic Rubber Concrete Joint Waterstop

    AKWASTOP - Hydrophilic Rubber Concrete Joint Waterstop

    A hydrophilic rubber waterstop, AKWASTOP swells up to 300% upon contact with water and provides a consistent seal along the entire installation. It prevents water infiltration through cast-in-place concrete construction joints subjected to continuous or intermittent hydrostatic pressure.

  • AKWASWELL - Polyurethane-Based Caulk Grade Swelling Paste

    AKWASWELL - Polyurethane-Based Caulk Grade Swelling Paste

    A polyurethane-based caulk grade swelling paste, AKWASWELL is used primarily to seal rough surfaces in concrete construction joints. Swelling up to 500% of its initial volume when hydrated by water, it creates a positive seal and stops the flow of water through the joint and is suitable for low to moderate hydostatic pressure conditions.

  • REVOFIX - Profiled Expanded Metal Mesh Strip

    REVOFIX - Profiled Expanded Metal Mesh Strip

    REVO-FIX is a profiled expanded metal mesh strip designed for mechanically fixing WATERSTOP-RX and WATERSTOP-XP to cast-in-place concrete surfaces. Revo-Fix can be used as an alternative method to CETSEAL. Available in two sizes.

  • Building Materials - Remedial Grouts

    Stop water ingress before it happens or even while water is flowing. Whether you need a simple crack repair, or a long-term waterproofing solution for penetrations, and structural joints in concrete walls, floors or ceilings, AKWASEAL LV or BENTOGROUT can satisfy your needs. Proven effective in hundreds of projects, these remedial waterproofing products are the choice of concrete professionals world-wide.

  • CETCO BENTOGROUT - Pump and Mixer

    CETCO BENTOGROUT - Pump and Mixer

    The CETCO Bentogrout Pump and Mixer equipment is designed specifically for Bentogrout. CETCO Bentogrout equipment is comprised of a progressive cavity pump with a vertical paddle and horizontal ribbon blender type mixer.

  • Building Materials - Ultraseal

  • Ultraseal - Advanced Active Polymer Core (APC) Waterproofing Technology

    Ultraseal - Advanced Active Polymer Core (APC) Waterproofing Technology

    Advanced Active Polymer Core (APC) waterproofing technology with integrated geomembrane liner. Engineered to provide high-performance waterproofing protection for foundation applications. ULTRASEAL is 10 times less permeable and more chemically resistant than traditional hydrophilic waterproofing membranes. The swelling action of the APC resists high levels of groundwater contaminants and can self-seal small concrete cracks caused by ground settlement...

  • Environmental Products - GCL - Bentomat

  • Bentomat - Geosynthetic Clay Liner

    Bentomat - Geosynthetic Clay Liner

    BENTOMAT Geosynthetic Clay Liners available in a wide range of configurations, meeting your project requirements. When designing with GCLs, engineers should consider shear strength, hydraulic performance and chemical compatibility in order to assure a stable, long-lasting and high-performing liner system. BENTOMAT can be configured with various components in order to ensure maximum value and performance. Not all projects have the same performance...

  • Bentomat - Model DN-HS - Geosynthetic Clay Liner

    Bentomat - Model DN-HS - Geosynthetic Clay Liner

    BENTOMAT DN-HS is a reinforced GCL consisting of a layer of sodium bentonite between two polypropylene nonwoven geotextiles that are needle-punched together. This double nonwoven GCL provides higher strength as compared to ordinary double nonwoven GCLs while maintaining the advantage of higher interface friction performance.

  • Environmental Products - GCL - Resistex

  • Resistex - Geosynthetic Clay Liners

    Resistex - Geosynthetic Clay Liners

    RESISTEX is a polymer-modified bentonite GCL that is engineered to provide the highest level of chemical compatibility for hydraulic barrier performance in extremely aggressive leachate environments.

  • Environmental Products - GCL - Fluoro-Sorb

  • FLUORO-SORB - Adsorbent Media for PFAS Remediation and Removal

    FLUORO-SORB - Adsorbent Media for PFAS Remediation and Removal

    FLUORO-SORB adsorbent is a proprietary, NSF-certified product designed to globally support remediation efforts surrounding per- and polyfluoroalkyl substances (PFAS). Unlike other sorbent products that are selective and unpredictable in adsorbing PFAS, FLUORO-SORB adsorbent binds the entire spectrum of PFAS (including PFOA, PFOS, PFHxS and PFNA) efficiently and in a wide variety of removal and remediation processes. With a specially...

  • Environmental Products - GCL - Soil Sealants

  • Volclay - Bentonite Soil Sealants

    Volclay - Bentonite Soil Sealants

    Using bentonite to create a soil liner. VOLCLAY bentonite soil sealants are granular and powder sodium bentonite that provides economical, low permeability soil liners for a wide variety of containment applications. When VOLCLAY bentonite soil sealants are mixed with soil and hydrated, they expand to fifteen times in volume, forming a mechanical bond with surrounding soils and filling the voids between the soil particles. This creates a barrier that...

  • Environmental Products - Solidification/Stabilization

    In-Situ Solidification/Stabilization: Enhancing the performance of cement based systems. In-situ S/S treatment can be more cost effective and more protective of human health and the environment than traditional dig-and-haul remedies. In-situ S/S treatment minimizes excavation and the associated release of volatiles and eliminating the additional costs of landfill disposal. Solidification/stabilization (S/S) prevents or slows the release of hazardous constituents from contaminated media. CETC

  • Quik-Solid - Model 50 - Granular Cross-Linked Polyacrylate Superabsorbent Polymer

    Quik-Solid - Model 50 - Granular Cross-Linked Polyacrylate Superabsorbent Polymer

    QUIK-SOLID 50 is a custom blend of granular cross-linked polyacrylate superabsorbent polymer and ORGANOCLAY. This high performing product rapidly absorbs and retains large volumes of aqueous solutions, while also offering a hydrophobic component to adsorb low soluble organic matter. The absorptive properties of QUIK-SOLID 50 are ideally suited for the solidification of wastewater, sediments and semi-solids containing organic laden contaminants.

  • Quik-Solid - Superabsorbent Media Booms

    Quik-Solid - Superabsorbent Media Booms

    QUIK-SOLID Booms are a higher performing alternative to traditional cellulose absorbent products that are utilized for hazardous, non hazardous and low level radioactive waste disposal. QUIK-SOLID superabsorbent media and a cellulose filler material are packaged in a closed nylon sock to ensure maximum polymer retention and absorbency. The sock can be cut to size and placed in drums, boxes intermodal and other transport containers for solidification...

  • Quik-Solid - Superabsorbent Media Mats

    Quik-Solid - Superabsorbent Media Mats

    QUIK-SOLID Mats are a high-performing yet lower cost alternative to other absorbent fabric products that are used in the hazardous waste or nuclear waste disposal industry. QUIK-SOLID Mats are made with polyester fabric layers bonded together with a special polyolefin adhesive. The QUIK-SOLID granular absorbent polymer is imbedded between the layers of fabric and the entire laminate structure is made of non-biodegradable materials.

  • Quik-Solid - Super Adsorbent Polymer

    Quik-Solid - Super Adsorbent Polymer

    Quik-Solid super adsorbent polymer is a solid, granular cross-linked polyacrylate advanced superabsorbent media that rapidly absorbs and retains large volumes of fresh water aqueous solutions. Its absorptive properties are ideally suited for the absorption and solidification of hazardous and non-hazardous waste waters, soils, and semi-solid matter. This high efficiency absorbent is capable of absorbing up to 250 times by weight of aqueous matter and...

  • Environmental Products - Sediment Capping Technologies

    CETCO provides a range of solutions for remediation of contaminated sediments. Contaminants may be treated in-situ, reducing risks and project costs. Depending on the site conditions traditional sand caps may prove unfeasible, or result in an excessively thick design. Sediment capping technologies provided by CETCO address concerns about navigation, placement, biointrusion and flow patterns. Active cap designs incorporate active or adsorptive media to capture or treat the contaminants and re

  • Reactive Core Mat Organoclay - Permeable Composite of Geotextiles and Granular Organoclay

    Reactive Core Mat Organoclay - Permeable Composite of Geotextiles and Granular Organoclay

    REACTIVE CORE MAT is a patented permeable composite mat consisting of reactive material(s) encapsulated in a non-woven core matrix bound between two geotextiles. The upper geotextile is a needle-punched, non-woven fabric that is heat-laminated to a matrix of nonwoven fibers needle-punched into a woven geotextile. Through its innovative processing, RCM can combine two active materials, if required.

  • Bentoblock - Low Permeability Sediment Cap Material

    Bentoblock - Low Permeability Sediment Cap Material

    BENTOBLOCK is natural sodium bentonite screened to 3/8 inch (0.95 cm) to 3/4 inch (1.90 cm) in size. BENTOBLOCK is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health Effects.

  • Environmental - Organoclays

    Organic adsorption media for environmental remediation applications. The Organoclay product line is a range of proprietary adsorption media that is highly effective in removing oils, greases and other high molecular weight, low solubility organic compounds from aqueous streams. Organoclay products are specialty sorbents, altered to an organophilic state making them attractive to organic molecules.

  • CETCO Organoclay - Model PM-200 - Organic Adsorption Media

    CETCO Organoclay - Model PM-200 - Organic Adsorption Media

    CETCO PM-200 ORGANOCLAY® is a proprietary granular adsorption media effective in removing oils, greases other non-aqueous phase liquids (NAPL) and other dissolved high molecular weight/low solubility organics. Organoclay PM-200 is specially formulated for use in the following applications; Bulk Sediment Capping and in Permeable Reactive Barriers (PRBs).

  • CETCO Organoclay - Model PM-199 - Organic Adsorption Media

    CETCO Organoclay - Model PM-199 - Organic Adsorption Media

    CETCO PM-199 ORGANOCLAY is a proprietary granular adsorption media effective in removing oils, greases other non-aqueous phase liquids (NAPL) and other dissolved high molecular weight/low solubility organics. Organoclay PM-199 is specially formulated for use in the following applications; Organophilic Filtration Media, Bulk Sediment Capping and as a Solidification/Stabilization additive.

  • CETCO Organoclay - Model SS-199 - Organic Adsorption Media

    CETCO Organoclay - Model SS-199 - Organic Adsorption Media

    CETCO SS-199 ORGANOCLAY is a semi-granular adsorption media effective in removing oils, greases other non-aqueous phase liquids (NAPL) and other dissolved high molecular weight/low solubility organics. Organoclay SS-199 is specially formulated for use in in situ solidification.

  • ORGANOCLAY - Organic Adsorption Media for Environmental Remediation Applications

    ORGANOCLAY - Organic Adsorption Media for Environmental Remediation Applications

    The ORGANOCLAY product line is a range of proprietary adsorption media that is highly effective in removing oils, greases and other high molecular weight, low solubility organic compounds from aqueous streams. The ORGANOCLAY products are specialty sorbents, altered to an organophilic state making them attractive to organic molecules.

  • Environmental Products - Vapor Intrusion Barrier Systems

    High performance Vapor Intrusion Barrier Systems designed to meet your project requirements. LIQUID BOOT is a spray-applied, water-based membrane containing no volatile organic compounds (VOCs). With superior chemical resistance properties it seals all vapor intrusion pathways, preventing contaminated soil vapors from penetrating the slab. LIQUID BOOT spray applied vapor intrusion barrier systems can be used in underslab and below grade vertical wall applications to minimize gas and vapor in

  • Liquid Boot - Vapor Intrusion Barrier Systems

    Liquid Boot - Vapor Intrusion Barrier Systems

    High performance Vapor Intrusion Barrier Systems designed to meet your project requirements. LIQUID BOOT is a spray-applied, water-based membrane containing no volatile organic compounds (VOCs). With superior chemical resistance properties it seals all vapor intrusion pathways, preventing contaminated soil vapors from penetrating the slab. LIQUID BOOT spray applied vapor intrusion barrier systems can be used in underslab and below grade vertical wall...

  • Liquid Boot - Spray-Applied Gas Vapor Barrier

    Liquid Boot - Spray-Applied Gas Vapor Barrier

    LIQUID BOOT is a seamless, spray-applied, water-based membrane containing no VOCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT is installed under slab and on below grade vertical walls as a gas vapor barrier to minimize vapor and nuisance water migration into buildings. LIQUID BOOT spray-application directly to penetrations, footings, grade beams, pile caps and other irregular surfaces, provides for a fully-adhered...

  • Liquid Boot - Model 500 - Spray-Applied Gas Vapor Barrier

    Liquid Boot - Model 500 - Spray-Applied Gas Vapor Barrier

    LIQUID BOOT 500 is a seamless, spray-applied, water-based membrane containing no VOCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT 500 is economically formulated specifically for horizontal applications. LIQUID BOOT 500 spray application directly to penetrations, footings, grade beams, pile caps and other irregular surfaces, provides for a fully-adhered gas vapor barrier system.

  • Basefabric - Model T-60 - Non-Woven Geotextile Fabric

    Basefabric - Model T-60 - Non-Woven Geotextile Fabric

    BASEFABRIC fabric consists of polypropylene, non-woven geotextile that is resistant to ultraviolet degradation and to biological and chemical environments normally found in soils. BaseFabric provides a uniform substrate for spraying the Liquid Boot membrane.

  • Geovent - Active/Passive Gas Venting System

    Geovent - Active/Passive Gas Venting System

    GEOVENT consists of a three-dimensional vent core that is wrapped in a non-woven, needle punched filter fabric. GEOVENT consists of a three-dimensional vent core that is wrapped in a non-woven, needlepunched filter fabric. GEOVENT End Outlets are available for use in conjunction with GEOVENT active/passive gas venting systems.

  • Liquid Boot - Trowel Grade

    Liquid Boot - Trowel Grade

    LIQUID BOOT TROWEL GRADE is a trowel-applied, water-based membrane containing no VoCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT TROWEL GRADE is installed in conjunction with the LIQUID BOOT vapor intrusion barrier to minimize vapor migration.

  • Ultradrain - Model 6200 - Drainage Material

    Ultradrain - Model 6200 - Drainage Material

    ULTRADRAIN consists of an impermeable polymeric sheet cuspated under heat and pressure to form a high flow dimpled drainage core. The core is then bonded to a layer of non-woven filter fabric. The filter fabric retains soil or sand particles as well as freshly placed concrete or grout, allowing filtered water to pass into the drainage core. Ultradrain also has a protection sheet bonded to the backside of the cuspated core providing protection for soft...

  • Ultrashield - Model G-1000 - Non-Woven Geotextile Fabric

    Ultrashield - Model G-1000 - Non-Woven Geotextile Fabric

    Ultrashield fabric consists of polypropylene, non-woven geotextile that is resistant to ultraviolet degradation and to biological and chemical environments normally found in soils. UltraShield provides protection for the membrane from rebar and other construction processes. ULTRASHIELD G-1000 is a polypropylene, staple fiber, non-woven geotextile. The fibers are needled-punched, forming a stable network that retains dimensional stability relative to...

  • HDPE Geomembrane - Model VI-20 - High-Performance Vapor Intrusion Barrier

    HDPE Geomembrane - Model VI-20 - High-Performance Vapor Intrusion Barrier

    VI-20 is a 7-layer co-extruded EVOH geomembrane made using high quality virgin-grade polyethylene and barrier resins that provide unmatched impact trength as well as superior resistance to VOC vapor transmission. EVOH technology serves as a highly resilient underslab and vertical wall barrier designed to restrict methane, radon and other harmful chemicals. Applications for EVOH originatedin them of hydrocarbons, whose use was mandated by the US EPA...

  • Drilling Products - Drilling Fluids

  • Hydraul-EZ - Horizontal Directional Drilling Fluid

    Hydraul-EZ - Horizontal Directional Drilling Fluid

    HYDRAUL-EZ is a high-yield, 200 mesh sodium Wyoming bentonite blended with a special dry polymer additives making it ideal for HDD boring. HYDRAUL-EZ is certified to NSF/ANSI Standard 60, Drinking Water Treatment Chemicals - Health Effects.