ChemInnov - Industrial Chimneys
ChemInnov chimneys are standard, industrial chimneys, intended for all types of boilers and electricity generators running on gas, fuel, oil or wood with flue gas temperatures of 60° to 550°C. ChemInnov chimneys are available in diameters 200 to 800mm. They are made out of austenitic stainless steel and insulated by mineral wool, the thickness and density of which vary depending on application. The standard fi- nish jacket is made from primary aluminium. They can be tied with a guiding collar or free-standing with embedded anchors in the ground. The ChemInnov base plate means that the chimney can be turned 360°.
- Competitiveness
- Saves time: manufacture, delivery, assembly
- Connection flexibility
- Wide choice of finishes
- Easy to assemble
Stability reinforcement and flue gas inlet on ChemInnov ®
The smoke flue inlet is a sensitive part of the chimney as every time the plates are opened, the chimney’s stability is weakened. This is why all of our ChemInnov® chimneys are fitted with belt and straight base reinforcements to ensure mechanical resistance and long life. Fume evacuation is facilitated with smoke flue inlets at 135°. By limiting pressure loss, the output of generators is more effective.
Evacuation of condensation
The dew point is when water in the flue gas turns from a gas state to a liquid state. This common phenomenon during smoke evacuation creates condensation. By installing a condensation trap and drain pipe, the chimney is kept clean easily and effectively. The condensation trap is always located as close as possible to the flue gas inlet to protect it from cold fumes that would damage the chimney base. The whole system helps to protect the generator from backflow of condensation from the chimney.
Anchoring on the free-standing ChemInnov ®
For an effective and rapid connection, ChemInnov® has a base plate that can be turned 360°, meaning that the chimney can turn on itself. It therefore becomes easier to align the chimney with the smoke evacuation horizontal flue. A fastening system by guided collars keeps the chimney stable.
- The chimney termination seals are made from stainless steel 1.4404 (316L)
- 2mm thick stainless steel flue liner
- 50mm thick mineral wool insulation, density 80kg/m3
- Smoke flue inlet at 135°
- Insulated and curved inspection door
- Evacuation of condensationv
- Finish in primary aluminium (isoxal)
- Rapid installation
- Base plate can be turned 360° with rust protection
- Lightning conductor system: stainless steel tips comply with standard NF
- EN 62 305 with “crow’s foot” earth connection, copper plate outside heat
- Insulation and lightning meters.
- 100mm thick mineral wool insulation
- Weighted index measuring point EN 13 284 2
- Stainless steel mirror finish, all RAL shades of custom-made decoration
- Aircraft warning day-time marking: with paint red and white stripes
- Aircraft warning night-time marking: high-intensity duty/standby lamps to
- Be supplied from chimney base
- Storm collar
- Continuous measuring point