Becca - Model 3P -Clean & Polish Waste Management System
At BECCA we have developed a series of tools that make up the 3P System. We selected tools for the spray gun cleaning process based upon the testing and feedback received from top painters across the country. As a result, we developed tools to achieve maximum success using little effort in a short period of time.
Spray guns used with solvent based materials can primarily be cleaned with solvent however, waterborne materials are more difficult to clean. The standard process of chasing waterborne material with solvent (usually acetone) creates more issues than it solves. For instance, solvent mixed with waterborne paint causes waterborne paint to become and behave like a solvent paint. The remaining paint in or on the spray gun will create a strong adhesion to the surface, eventually causing performance problems or corrosion.
It stands for Three Processes for Success!
Process One: Begin by a detailed cleaning and polishing of your paint spray gun. This will get it back to a like new condition. If your gun is new move on to Process Two.
Process Two: Now implement the BECCA cleaning system for primer/sealer, base coat, clear coat, or two component materials or single stage materials.
Process Three: Finishing up, select a waste management system that best handles the particular materials you are using whether waterborne, solvent, multi-stage, two component, or single stage.
What is 3P?
The BECCA 3P System takes Spray Gun Cleaning to the ultimate level. This system provides a long term solution that has:
- High Level of Cleaning
- If all steps of the process are followed then the gun will be like new all the time
- Very Low cost to Operate
- Low Maintenance costs
- Only uses a small amount of compressed air
- Very Low waste Generation
- Hazardous waste
- Regular Waste
BECCA’s 3P System provides an easy, and effective method for cleaning paint spray guns like no other competitive paint gun cleaner.