- Home
- Companies
- CleanAir Europe
- Products
- CleanAir Cateco - Isokinetic Sampling ...
CleanAir Cateco - Isokinetic Sampling System
CleanAir Europe offers the CleanAir CATECO Isokinetic Sampling System which is identical to the Method 5 sampling system, the difference being the replacement of the modular sample filtration system with a more versatile CATECO heated filter unit. Separating the probe and the filtration unit from the glassware makes it easier to use this unit for vertical sampling or for locations where sampling points are difficult to access. The CATECO CleanAir system is ideally suited for sampling according to the American EPA 40 CFR 60, European prEN 13284-1 standards. It is also compatible with the ISO 9096 standard. "Determination of particulate emissions from stationary sources. ». Other pollutants can be sampled in the splash section provided the correct reagent is used.
Composition:
- Control console for isokinetics and temperature control
- Vane pump for controlling the sampling rate
- Heated sampling probe equipped with a pitot tube and a thermocouple
- Set of sampling nozzles
- Heated oven with temperature measurement at the filtration point
- Set of filters
- Connecting umbilical
- Drip tray, complete glassware set and outlet fitting
- Sample recovery kit
- Cable gland for sealed probe mounting
- Optional standard port tape to accept the cable gland.
Characteristics:
- CE marking in 230 V
- Flow rate depending on isokineticity and pressure drop up to 40 l/min
- Thermocouples type K
- 82.6 mm cellulose, glass or quartz filters
- Oven temperature 120°C
- Useful length of probes: 2`, 3`, 4`, 5`, 6`, 8` and 10` (consult us for other lengths)
- Borosilicate, quartz, stainless steel, titanium, inconel sheaths
- Umbilical lengths: 7.5 m, 15 m or 30 m
- Nozzles according to EN 13284-1, ISO 9096: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 and 14 mm
- Nozzles according to US EPA 40 CFR 60: 1/8″, 3/16″, 1/4″, 5/16″, 3/8″ and 1/2″
Standards:
- Method US EPA 5, EN 13284, ISO 9096, ISO 12141
Key points:
- The CATECO oven is particularly adapted to difficult samples thanks to its small probe and a reduced oven compartment.
- The use of this system must imperatively be entrusted to a user trained in a specific methodology. The flow velocity at the sampling point must be known and communicated to CleanAir Europe for project feasibility.