CleanAir Europe products

CleanAir offers a manual isokinetic sampling system for continuous sampling of gases or vapours from a stack with the same velocity characteristics as at the sampling point. The particles are deposited on a filter. Hot gases are conditioned in a series of cold bubblers. Condensate is recovered and a volumetric gas meter (DGM) measures the dry gas flow rate. This system exists either with a heating cabinet or with a Cateco oven which allows a reduced space requirement.

CleanAir Europe offers the CleanAir CATECO Isokinetic Sampling System which is identical to the Method 5 sampling system, the difference being the replacement of the modular sample filtration system with a more versatile CATECO heated filter unit. Separating the probe and the filtration unit from the glassware makes it easier to use this unit for vertical sampling or for locations where sampling points are difficult to access. The CATECO CleanAir system is ideally suited for sampling according to the American EPA 40 CFR 60, European prEN 13284-1 standards. It is also compatible with the ISO 9096 standard. "Determination of particulate emissions from stationary sources. ». Other pollutants can be sampled in the splash section provided the correct reagent is used.

The AQM 65 is a fully integrated air measurement station that offers high levels of performance. The size of a large suitcase, it can measure up to 20 gaseous and particulate pollutants and various environmental parameters simultaneously. The AQM 65 offers the optimal balance of performance and pollutant price measurement criteria in relation to WHO air quality limits, while costing 3 to 5 times less than a traditional station based on analyzer technology.

The E-Sampler is a device for counting particles and dust in the ambient air. The E-Sampler uses a dual laser and gravimetric technology for real-time monitoring of aerosols and particles. Equipped with an acquisition unit, its autonomy on battery (supplied) is 30 hours. This device is suitable for outdoor and indoor measurements and provides measurements of ambient temperature, atmospheric pressure and relative humidity.

Model JUM 3-200 is a fully heated transportable FID that has been successfully used in international markets for over 30 years. Also among other portable gas FIDs, the JUM 3-200 is the first fully heated transportable FID built using a high pressure back pressure sampling filter. It is widely distributed in the industry and battery testing community and is highly regarded for its ruggedness, high accuracy, sensitivity and stability. Our optional 50 liter highly secure low pressure metal hydride fuel tank can easily be mounted on the left side panel, and provides 45 hours of uninterrupted operation. This fuel tank can be self-filled at a low pressure of only 25 bar. No special adapters are required. A standard 2-stage pressure regulator with 30 bar output is sufficient.

The Heated FID 3-500 is the low cost version of our 3-300A analyzer that has been sold thousands of times in over 3 decades. The 3-500 was introduced when a number of long term users requested a lower cost but fully compliant heated FID analyzer to be integrated into their EMC systems.

Combustion analysis in the industrial sector: With the testo 340 Combustion Analyzer, you have professional technology, easy handling, and practical operation in one device. The powerful testo 340 combustion analyzer can accommodate up to four gas sensors.

The testo 815 is the ideal device for assessing the noise level in the workplace on a daily basis. The device can be used for control measurements in the air conditioning and heating sector, on combustion plants or at the workplace, but also for quick and precise noise assessment of machinery or in a disco.

The Model 108 Heated Sample Diluter dilutes an introduced sample gas of high concentration at a dilution ratio of 1:10 (standard) or 1:100 (optional) to allow linear measurement of total hydrocarbon concentration ratios greater than tens of thousands of ppm, up to 10% and higher. For faster response, greater range and zero stability, sample injection is the method of choice in this proven heated sample dilutor.

CleanAir offers the second-hand Tecora Skypost aircraft to collect dust from the ambient air. This sampler can be equipped with a PM10 and PM2.5 cyclone. The dust is deposited on a 47mm filter. Measurement sequences are programmable. The electronic flow regulator allows continuous, unsupervised operations and easy replacement of the filter without interrupting the sampling.