Logo Environmental XPRT
Companies
Products
Services
Software
Training
Applications
Sign in
List your business
CleanAir Europe
About
Downloads
  2. Companies
  3. CleanAir Europe
  4. Products
  5. CleanAir - Manual Isokinetic Sampling ...

CleanAir - Manual Isokinetic Sampling System

SHARE

CleanAir offers a manual isokinetic sampling system for continuous sampling of gases or vapours from a stack with the same velocity characteristics as at the sampling point. The particles are deposited on a filter. Hot gases are conditioned in a series of cold bubblers. Condensate is recovered and a volumetric gas meter (DGM) measures the dry gas flow rate. This system exists either with a heating cabinet or with a Cateco oven which allows a reduced space requirement.

Most popular related searches
isokinetic sampling system
isokinetic sampling system
isokinetic sampling
heated sampling probe
EPA 40 CFR
isokinetic
heated sampling
digital temperature controller
pitot tube
quartz filter

Composition:

  • Control console for isokinetics and temperature control
  • Vane pump
  • Heated sampling probe equipped with a pitot tube and a thermocouple
  • Set of sampling nozzles
  • Heated oven with temperature measurement at the filtration point
  • Set of filters
  • Connecting umbilical
  • Drip tray, complete glassware set and outlet fitting
  • Sample recovery kit
  • Cable gland for sealed probe mounting
  • Optional standard port tape to accept the cable gland.

Characteristics:

  • CE marking in 115 V or 230 V
  • Flow rate depending on isokineticity and pressure drop up to 40 l/min
  • Thermocouples type K
  • 82.6 mm cellulose, glass or quartz filters
  • Oven temperature 120°C
  • Useful length of probes: 2`, 3`, 4`, 5`, 6`, 8` and 10` (consult us for other lengths)
  • Borosilicate, quartz, stainless steel, titanium, inconel sheaths
  • Umbilical lengths: 7.5 m, 15 m or 30 m
  • Nozzles according to EN 13284-1, ISO 9096: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 and 14 mm
  • Nozzles according to US EPA 40 CFR 60: 1/8″, 3/16″, 1/4″, 5/16″, 3/8″ and 1/2″

Standards:

  • Method US EPA 5, EN 13284, ISO 9096, ISO 12140


Key points:

  • The use of this system must imperatively be entrusted to a user trained in a specific methodology. The flow speed at the sampling point must be known and communicated to CleanAir Europe for the feasibility of the project.