CM Technologies GmbH
- Home
- Companies
- CM Technologies GmbH
- Products
- CMT - Drip Sampler
CMT - Drip Sampler
The most common and cheapest way to get a representative sample is to use a drip sampler. Installation: The heavy oil sampler can be installed on any standard flange. MARPOL 73/78: Designed to comply with regulatory requirements in sampling.
Most popular related searches
oil condition monitoring
MARPOL annex VI
autosampling
MARPOL annex
MARPOL
oil monitoring
sample conditioning system
oil sampling
pipe flange
sample conditioning
- Using a so-called drip sampler is the most common and economic way to obtain a representative sample according to MARPOL 73/78 Annex VI.
- One size sampler can be used on most common different standard flanges even for different pressure.
- In cases when you have a negative pressure at the point of sampling please use our automatic samplers.
- Select the nearest size Bunker Sampler with an outer diameter smaller than the flanges Pitch Circle Diameter minus the flanges Bolt Hole Diameter.
- The inner diameter must be larger than the Nominal Pipe Size of the flange.
- Manufactured under strict ISO 9001 quality assurance standards.
- Compliant with IMO MARPOL 73/78 Annex VI helping you to stay within the legal requirements for bunker fuel sampling.
- Weight optimized.
- Simple to install on all common flanges between 2” and 14”.