Coalescing Systems

• Compact, economical liquid
• Separation systems for use with
• Non-emulsified solutions up to 150°f.

SERFILCO Coalescing Systems are compact, economical, and simple to operate. Remove oils from rinse waters, cleaning solutions, plating solutions or waste effluents. Separate water or tramp oil from hydraulic fluids and machining coolants.

Highly effective systems pump, prefilter and separate nonemulsified fluids having a .09 or greater difference in specific gravity. Solution is pumped through prefilter, then coalescing element where small droplets are held until large enough to float to top of coalescing chamber. Light phase is discharged from top of coalescing chamber, heavy phase is discharged from bottom of coalescing chamber. Unwanted phase is periodically bled off via manual flow control valve. Purified solution is directed back to tank or reservoir for re-use. Recovered effluent contains less than 10 ppm of the discontinuous phase. Carbon purification may be used to polish.

Standard coalescing systems include pump,* prefilter and coalescing chamber with manual light and heavy phase discharge valves. Prefilter media of 5 to 10 micron is required to protect coalescing element. Selecting a system with greater prefilter capacity will reduce prefilter cartridge and coalescing element consumption. If properly protected, coalescing element has indefinite life. Coalescing of fluids with excessive particulate loading is best accomplished when solution is first clarified with separate filtration system.

Standard pumps are low shear positive displacement: flexible impeller, rotary gear or diaphragm. These pumps minimize emulsification in pump head and have self-priming capabilities. For removal of floating or light phase, pump suction must be connected to overflow weir or optional skimmer assembly. For removal of heavy phase solution, suction connection near tank bottom is recommended.