Codel EnergyTech - Model 301 -Tribo Electric Dust Monitor

A low cost dust monitor using well-proven technology providing accurate and rapid results. Being adaptable it can can be used on duct sizes from 250mm to 5m making the EnergyTech 301 a suitable sensor for a wide range of applications where a dust measurement is required.

EnergyTech 301 continuous dust monitor uses the well-proven tribo-electric sensor technology to directly measure mass particulate concentration by sensing the frictional charge created when particles collide with a conductor.

The advanced electronics of the EnergyTech 301 detect this signal and present it to the operator via RS485 or 4-20mA directly out from the sensor head. The EnergyTech 201 also features a built in display for viewing live sensor data as well as for configuration and calibration.

The measurement levels can be corrected to mg/m3 via an integrated calibration function.

The tribo-electric technique is extreamly sensitive, capable of detecting dust concentrations of less than 1mg/m3 in small ducts.

The EnergyTech 301 requires no critical alignment and has no optical surfaces to keep clean. The sensor is easy to install, requiring only a simple probe and is ideal for small duct sizes.

Minimal maintenance is required, infrequent probe cleaning and low installation costs make this technology extreamly attractive for cust collector monitoring.

• Direct sensing method; actual particulate concentration
• Automated Online zero and span checking facility
• Integrated calibration function for mg/m3 output
• Easy installation with minimal maintenance required
• Adaptable; suitable for virtually all dust collectors
• Wide range of duct sizes from 250mm to 2m

• The EnergyTech 301 a suitable sensor for a wide range of applications where a dust measurement is required.

• Operating Range: 0.07 to 6500mg/m3 or 0 – 100%
• Particle Size: 0.1 to 100μm
• Duct Diameter: 250mm to 2m
• Ambient Temperature: -20°C to +55°C
• Power supply: 48V DC supplied from Power Supply Unit (PSU)
• Construction: aluminium casting, weatherproof to IP67 (NEMA 4)
• Analogue outputs: 4-20mA opto-isolated
• Alarm output: alarm relay 2.5A @ 24V
• Digital Outputs: RS485 Modbus Bi-Directional