- Home
- Companies
- Core Sensors LLC
- Products
- Core Sensors - Model CS50 - ...
Core Sensors - Model CS50 -Non-Incendive Pressure Transducer
The CS50 Non-Incendive Pressure Transducer is a high strength sensor designed for use in Class I, Division 2 hazardous locations. The CS50 features an all welded stainless steel construction, offering a minimum IP65 rating. A wide range of configurable options make the CS50 a versatile pressure transducer designed to operate in some of the harshest conditions. The CS50 is an excellent solution for applications such as natural gas compression, hydrogen compression and storage, and process control instrumentation.
- CSA Class I, Division 2, Groups A, B, C, D T4 Approved
- Pressures from 50 PSI up to 30,000 PSI
- See model CS51 for pressures below 50 PSI.
- One piece design
- Assembled in New Jersey, USA
- Natural gas compression
- Oil exploration
- Process controls
- Hydrogen (316L SS only)
In an effort to simplify installation in Class I, Division 2 hazardous locations, the CS50 Non-Incendive Pressure Transducer is offered with an integral Turck Minifast electrical connection.
When combined with a CSA Division 2 approved Turck cordset and a Turck Lokfast Guard, there is no requirement for conduit to be installed over the cable*. This not only makes installation easy but also makes switching out sensors less cumbersome. Core Sensors can supply all components as a complete package. Click here to learn more about the Turck Minifast electrical connection.
Accuracy @ 25°C*
≤ ± 0.25% BFSL
≤ ± 0.5% BFSL (>10,000 PSI)
Stability (1 Year)
≤ ± 0.25% of FS
Pressure Cycles
100 million
Overpressure
2X minimum
Burst Pressure
5X or 60,000 PSI, whichever is less
* Accuracy includes non-linearity, hysteresis and non-repeatability
Operating Temperature
-40 to +80°C
Operating Temperature
(Electrical connection “F”, DIN 43650-A)
-20 to +80°C
Media Temperature
-40 to +125°C
Media Temperature
(Electrical connection “F”, DIN 43650-A)
-40 to +105°C
Compensated Temperature
0 to +55°C
Storage Temperature
-40 to +125°C
TC Zero
≤ ± 1% of FS
TC Span
≤ ± 1% of FS
EMI/RFI Protection
Yes
IP Rating*
IP65 minimum
Vibration
10g, 20 to 2000Hz
Shock
100g, 11msec, 1/2 sine
* IP Rating is dependent on electrical termination selected. Contact factory for more information.
* IP Rating applies when electrical connector is attached with the appropriate ingress protection.
Outputs
4-20mA
Excitation
10-28VDC
Current Consumption
20mA, typical
Output Load
0-800 Ohms @ 10-28VDC
Frequency Response (min)
~250Hz
Zero Offset (of FS)
≤ ± 0.5% typical, ± 1% max
Span Tolerance (of FS)
≤ ± 0.5% typical, ± 1% max
Outputs
1-5V
1-6V
Excitation
10-28VDC
Current Consumption
<10mA
Output Load
5K Ohms, min
Frequency Response (min)
~1kHz
Zero Offset (of FS)
≤ ± 0.5% typical, ± 1% max
Span Tolerance (of FS)
≤ ± 0.5% typical, ± 1% max
Outputs
0.5-4.5V ratiometric
Excitation
5VDC +/- 0.5V
Current Consumption
<10mA
Output Load
5K Ohms, min
Frequency Response (min)
~1kHz
Zero Offset (of FS)
≤ ± 0.5% typical, ± 1% max
Span Tolerance (of FS)
≤ ± 0.5% typical, ± 1% max
Outputs
0.5-2.5V non-ratiometric
Excitation
3-5VDC unregulated
Current Consumption
≤ 3mA
Output Load
5K Ohms, min
Frequency Response (min)
~1kHz
Zero Offset (of FS)
≤ ± 0.5% typical, ± 1% max
Span Tolerance (of FS)
≤ ± 0.5% typical, ± 1% max