Define - Model TM-2DLI -2-Wire Isolated Universal Transmitter

• 2-wire universal transmitter (DIN-mount, isolated)
• Current, voltage, thermocouple, RTD and potentiometer input
• Loop powered, 4-20mA output
• LED indicator for error notification
• Potentiometer for fine offset adjustment of current output

• Current, voltage, TC, RTD, & potentiometer input
• 3750VAC isolation between input & output
• -4 to 185°F (-20 to 85°C) operating temp
• 10.5 to 36VDC power supply
• 35mm symmetrical DIN rail mount
• Program using free Define ToolBox software download
  • No power supply or calibrator required
  • Requires a USB Bridge Key
• Designed to withstand harsh EMC environments
• CE approved & 5-year guarantee

Universal Input

• Configuration: 2 wire
• Number of universal inputs: 1 isolated universal input, full input specifications below

Power

• Power supply: 10.5-36V DC
• Supply voltage sensitivity: <±0.005%/V FSO

General Specifications

• Accuracy: ≤ ±0.1% of span
• Accurate to: <±0.03% FSO typical
• Ambient drift: <±0.003%/°C FSO typical
• Isolation test voltage: Between input and output: 3750V AC for 1min
• Noise immunity: 125dB CMRR avg (2.0kV DC limit)
• RF immunity: <1% effect FSO typical
• Maximum load: 1,200Ω (at 20mA with 36V input)
• Linearization tables: 32-point flexible linearization available
• Response time: 400msec typical (10-90% 300msec typical)

Thermocouple Input

• Thermocouple types: B, E, J, K, N, R, S, T
• Input impedance: 1MΩ min
• T/C lead resistance: 100Ω max
• Cold junction compensation: -4 to 194°F (-20 to 90°C)
• CJC error: <±1°C
• Accuracy: E, J, K, N, T: <±1°C. B, R, S: <±2°C
• Ambient drift: E, J, K, N, T: <±0.05°C. B, R, S: <±0.2°C
• Sensor break output drive: Function high upscale/low downscale
• USB programmable zero: 0–±99% of the span
• RTD Input
• RTD input type: PT100 or PT1000 DIN 3-wire type (2-wire can be used with off set calibration)
• Lead wire resistance: PT100: 10Ω/wire max. PT1000: 5Ω/wire max 0.02% FSO off set error per Ω of lead resistance.
• Sensor current: 0.15mA nominal
• Sensor break output drive: Function high upscale/low downscale
• USB programmable zero: 0–±99% of the span
• USB programmable span: –328 to 1562°F (–200 to 850°C)
• Linearity (PT100): 0.02% FSO for span inputs ≤200°C. 0.1% FSO for span inputs ≤850°C
• Linearity (PT1000): 0.02% FSO for span inputs ≤200°C. 0.2% FSO for span inputs ≤520°C
• Other available RTD types: JIS, PT392, CN10

Current Input

• USB programmable zero: 0–±99% of the span
• Field programmable span: 1μA–24mA DC
• Input impedance: 10Ω
• Max over-range: 50mA DC continuous
• Linearity & repeatability: <±0.02% FSO typical

Voltage Input

• USB programmable zero: 0–±99% of the span
• USB programmable span: 100mV to ±10V DC (bipolar)
• Input impedance: 300kΩ min
• Maximum over voltage: 60V DC continuous
• Linearity & repeatability: <±0.02% FSO typical
• Potentiometer Input
• Potentiometer input: 3-wire potentiometer
• Excitation voltage: 1.2V DC
• Potentiometer resistance: 0–2KΩ low pot, 0–1MΩ high pot
• Field programmable zero: 0–90% of the span
• Field programmable span: 0.1–100%
• Linearity & repeatability: <±0.02% FSO typical

Analog Output (Retransmission)

• Analog output type: 4-20mA or 20-4mA (loop powered)
• Output load resistance: 650Ω at 24V DC (50Ω/V above 10.5V DC)
• Max output current: Limited to < 28mA (emission and immunity)

Programming

• Define ToolBox: Simple programming using Define ToolBox (requires Bridge Key, sold separately)

Construction

• Casing: 35mm DIN mount case
• Dimensions (H x W x D): 3.11 x 0.79 x 2.68″ (79 x 20 x 68mm)
• LED indication: Flashing=Normal, On=Fault
• Potentiometer: For fine offset adjustment of current output

Environmental Conditions

• Operating temperature: -4 to 185°F (-20 to 85°C)
• Storage temperature: -4 to 185°F (-20 to 85°C)
• Operating humidity: 5–85%RH max (non-condensing)

Certifications & Compliances

• Casing: Panel mount case
• EMC: EN61326 (Emissions); EN61326 (Immunity); EN61010-1 (Safety)