RUNI - Model SK240/SK370 -Dewatering Reject
Dewater Rejects from Plastic Washing. All plants for plastic recycling, that washes their plastic before the real processing, have big amounts of reject from the washing plant. The reject is mostly very wet material consisting of paper, plastic, sand, textile etc. Unfortunately the reject cannot be used and therefore the recycling industry often has large cost for disposal of this wet reject.
RUNI screw compactor is a simple and efficient way to press out the liquid from the reject. It have the necessary sensors and automatic hydraulic jaws making it possible to operate automatically with start and stop, and regulating support depending on the material composition.
RUNI screw compactors have for many years proved to a be a strongly built and tough machine with an extra reinforced screw and screw house that makes it able to work 24/7.
RUNI has developed 2 sizes of screw compactor for this purpose:
When dewatering reject from plastic washing lines in a RUNI screw compactor, the reject ends with up to 75 % of dry matter.
Reject from industrial productions very often contain a lot of water. To save cost on transport and landfill it is beneficial to remove as much water as possible. Here the RUNI dewatering press has shown its worth. RUNI dewatering screw press is developed for dewatering of reject (waste from paper production containing plastic, wood, metal, laminated paper etc.), from the paper industry or for dewatering food waste from food industry. Before waste from the paper production can be transformed to recycling paper all unwanted material must be sorted out. This water containing reject is both expensive to transport and to dispose of, but after compacting and dewatering in the RUNI dewatering press, it can now go to incineration at a much lower cost.