Digested Organics LLC
- Home
- Companies
- Digested Organics LLC
- Products
- Digested - Spiral Brush Screen Filter
Digested - Spiral Brush Screen Filter
The wastewater to be filtered flows into the top of the unit where it enters the interior of the cylindrical screen. Clarified material, or filtrate, exits the unit by passing through the screen while the solids accumulate inside the screen. The motor spins a spiral-shaped cleaning brush within the screen, keeping the screen clean and pushing the accumulated solids to the purge outlet at the bottom of the unit. An automated valve opens periodically to discharge these solids out of the unit—there is no disruption to the process flow and no shut down time for backwashing.
Most popular related searches
suspended solids removal
wastewater clarification
filter element
wastewater suspended solids removal
automated valve
isolation valve
cylindrical screen
brewery wastewater
particle sizing
reverse osmosis system
- Automatically Self-Cleaning
- Handles High and Variable TSS (25,000+ mg/L)
- Low Cost / Low Maintenance
- Continuous Filtrate with up to 99%+ Recovery
- Patented Technology
- Single units or Multiplex
Model 850
- Inlet: 2” FNPT or #150 Flange
- Filtrate Outlet: 2” FNPT or #150 Flange
- Purge Outlet: 2” FNPT or #150 Flange
- Max Flow: 100 gpm
- Screen Micron Rating: 15 – 100 micron (wedgewire type)
- Max Operating Pressure: 120 psi @70°F
- Max Temp: 190°F
- Head Loss: 1-3 psi)
- Brush Motor: 1 HP (460V, 3-Ph)
- Wetted Housing: CPVC, 2205SS, Acetal
- Seals: EPDM or Viton
- Cleaning Brush: Acetal, Nylon 6.12 & 316 SS
- Filter Element: 316L SS
Model 1000
- Inlet: 3” FNPT, Flange, or Tri-Clamp
- Filtrate Outlet: 3” FNPT, Flange, or Tri-Clamp
- Purge Outlet: 3” FNPT, Flange, or Tri-Clamp
- Max Flow: 250 gpm
- Screen Micron Rating: 15 – 100 micron (wedgewire type)
- Max Operating Pressure: 150 psi @70°F
- Max Temp: 190°
- Head Loss: 1-3 psi
- Brush Motor: 7.5 HP (460V, 3-Ph)
- Wetted Housing: 316 SS
- Seals: EPDM or Viton
- Cleaning Brush: Nylon 6.12, 316 SS, UHWM-PE
- Filter Element: 316L SS
MULTIPLEX SKIDS
- Available with one to four units per skid and a choice of powder coated steel or a full stainless steel skid
- Stainless steel screens available from 10 to 100 microns to customize the particle size removal and throughput
- Custom-engineered plastic brushes (which operate inside the screens), and high-efficiency motors
- Isolation valves enable the operator to remove one unit for maintenance while the rest remain in service.
- Water inlet valve for flushing prior to system shut-down or maintenance.
- Maintenance platform with non-slip grating
- NEMA 4X enclosures and HMI for easy operations
- Wastewater clarification
- Suspended solids removal
- Food and beverage manufacturing wastewater
- Flush manure clarification
- Brewery wastewater clarification
- Pre-filtration for existing UF or RO system or our own Two-Step Reverse Osmosis™
