Disab TrailerVAC - Model SET-10T - Semi-Mobile Electrical Powered Vacloader
This is a semi-mobile electrical powered vacloader equipped with built-in hydraulic tipping system. It can be towed/connected to i.e. a tractor. It is perfect for both wet and dry materials and most often used in industrial applications where collection of dust is required.
The TrailerVac SET-10T suction units meet the high demands from the industry due to its efficiency, reliability, ease of operation and maintenance giving excellent value for money.
The TrailerVac SET-10T units are a series of mobile, electrical powered vacuums loaders that are fitted onto trailers chassis. Dry material and even liquids can be handled by the units. Together with a fixed pipe network they can operate as a perfect central vacuum unit for industrial installations.
- Rigid design for industrial use
- Roots-type high vacuum pump (50-80%)
- Filter system for dry and wet material
- Automatic filter cleaning without compressed air
- Electrical motor 30 to 55 kW
- Large dustbins with tailgate for easy discharge
- Very low noise level
Most heavy industry sites have raw material handling, production, packing etc. often located to several different buildings, with some distances between the premises. In these cases ordinary stationary central vacuum cleaning system is unable to serve everything. This is why the TrailerVac SET10T is a suitable choice. The high suction capacity together with the large collecting hopper volume, all placed onto a trailer for towing by a tractor or similar makes the whole unit easy to transport as it is operational as soon a hose/pipe is connected together with an electrical power plug. Also the handling of the dust is easily carried out as there is a built-in tipping cylinder for the discharge.
The rigid trailer can carry high load together with high suction capacity using Roots pump makes the unit especially suited for heavy industrial environments.
The vacuumed material is first separated in a specially designed fall chamber with a wear proof pre separator inlet. In this section the heavier particles fall to the bottom of the container.
From this section the air will be lead to the main filter section where any remaining fine dust will be separated. From the filter section the air passes a safety filter before entering the vacuum pump and a silencer before exhaust.
Due to the well insulated motor compartment housing the noise level of the unit is extremely low.
An unloading valve is placed between the main filter system and the vacuum pump. The vacuum will immediately be equalised when the valve is opened and at the same time the main filters will be cleaned. This will also prevent counterrotation of the motor as well as less power consumption at starting. It will also be activated by safety control functions. All functions are controlled at the dust-tight control panel and control lamps will indicate the units operational status.
For use in any industrial application where collection of dust is required i.e. to clean out; deep pits, trenches, bucket elevators, conveyor spills, overhead cranes and runways, dust collectors, processing machines etc.
The unit is specially suitable where bulky or sticky material shall be collected due to it’s convenient discharging.
Manufacturers of Cement, Lime, Gypsum, Tiles, Ceramics, Chemicals, Plastics, Fertilizers and Alumina. Foundries, Steel mills, Quarries, Mines, Pulp- and Paper Industry, Incineration Plants, Thermo-electric Power Plants, Painting Contractors/Shipyards, Cleaning Contractors…
- Vacuum pump: three-lobe rotary pump
- Max vacuum, mbar: 500
- Max overpressure, mbar: N/A
- Air volume m3/h (unloaded): 1855-3360
- Operation speed (rpm): 2 975
- Power: 30-55
- Voltage Frequency, V/Hz: 400/50
- Tank volume (m3)*: 3,5
- Total tank volume: 5,5m3
- Power source: Electric
- Engine type: N/A
- Tank material: Carbon steel/stainless steel
- Tank tipping: Hydraulic cylinder, single acting system. Hydraulically operated and locked tailgate as add-on.
- Main filter system (m2): 15
- Safety filter surface(m2): 20
- Cooling air:
- Atex: On request
Weight and Dimensions**
- Complete unit (including chassis): 3 700 / 3 850 / 4 200 / 4 250kg
- Total unit length including tuck chassis: 5 420mm
- Total width: 2 100mm
- Height (incl. hose boom): 2 600mm