Screwsucker - Pumping By APSCO
- Home
- Companies
- Screwsucker - Pumping By APSCO
- Products
- APSCO ScrewSucker - Model 125H - Dry ...
APSCO ScrewSucker - Model 125H -Dry Running, Self Priming, Solids Handling Diesel Engine Pump System
Discharge Flange: 6” 125 LB. ANSI. Capacity: (max @ 1800 RPM) 1900 GPM. Head: (max @ 1800 RPM) 136 ft.
Most popular related searches
pump system
water pump
drainage line
sewage water
noise emissions
level switch
raw sewage
pump station
diesel pump system
vacuum pump system
- Clog resistant impeller and liner in wear resistant configuration.
- Impeller has large free passage of 4”.
- Fuel consumption is 50% lower than conventional dirty water pumps with the same free passage.
- Large pump capacity combined with a low engine power rating.
- The pump set primes very quickly even at large suction heights.
- The vacuum system can handle large quantities of air. Up to 60 cfm, standard is 15 cfm.
- Capable of pumping unscreened raw sewage water.
- Capable of pumping viscous liquids.
- The wear liner can be adjusted from outside the pump. R1 and R3 configuration.
- Electronic vacuum system.
- Pump is capable of long running times in snore conditions.
- Pump can dry prime down to 28 feet.
- Automatic start / stop system (level switching).
- Very low noise emission.
- Double shaft seal immersed in oil bath (sic/sic and carbon/ceramic)
- Pumping out sewage pits and cellars.
- Drainage of building sites.
- Well pointing and drainage lines.
- Pumping bentonite and sludge.
- Emergency pump station.