Logo Environmental XPRT
Companies
Products
Services
Software
Training
Applications
Sign in
List your business
Sutron Corporation
About
Downloads
  2. Companies
  3. Sutron Corporation
  4. Products
  5. Sutron Accubar - Dual Orifice Constant ...

Sutron Accubar - Dual Orifice Constant Flow Bubble Gage & Recorder

SHARE

The Sutron Accubar Constant Flow (CF) Dual Orifice Bubble Gauge/Recorder, a self-contained, precision device for measuring water levels, water temperature*, suspended sediment* & density* using long established bubble gauge principles, combines the following components into a single package. Ideal for rivers, streams, dams & reservoirs, oceans & industrial areas plus any area where water density changes, eg, tidal & estuary areas.

Most popular related searches
water level data
water level monitoring
water quality
suspended sediment
data logger
river dam
water data
precision monitoring system
reservoir dam
sensor data
  • User-set measurement and logging. Version -2 make separate measurements in 2 locations. The Bubbler managers pressure on each orifice line independently so that pressures in one line do not affect operation of the other line.
  • Make measurements in separate channels or separate bodies of water or within the same area as redundant sensors (-2 version)
  • Intall the Bubbler orifice with a vertical separation to get an extended range measurement of up to 50 psi total on a 25 psi unit.
  • The -3 version adds a special ultra-accuate density sensor. The -3 density measurement is more accurate (0.1%) than measurements by separate stage sensors on-site would be.
  • Bubbler is both a logger and a sensor, capable of working as a stand-alone or with other loggers/communcations devices via SDI-12, RS232 and RS485.
  • Flash Log holds over 300,00 readings and allows recording of status, water level data.
  • SDI-12 and RS232/RS485 interfaces provide data to loggers or communications equipment.
  • Dual Orifice CF Bubbler supports MODBUS protocol.
  • RS232 port supports a simple command line mode compatible with HyperTerminal and other communcations devices.
  • RS232 port also provides full access to setup, status and Bubbler data plus easy connection to a modem or radio.
  • Front panel for setting up operating parameters, monitoring performance,testing and examining the log.
  • Self-contained needing only external power and orifice tubing.
  • Long-life desiccant (1 year depending on local humidity and user set flow rate)
  • User-set bubble rate for each line to accommodate a variety of field conditions.
  • User-set configuration of single, dual orifice lices and extended range operation (-2 only)
  • Built-in, precision Accubar® sensor, accuracy 0-20ft. 0.01 ft, 20-57.5ft. 0.05% reading. 50 psi version’s accuracy 20-115.3ft. 0.05% reading.
  • User-configured averaging to filter out waves.
  • User-set auto purge to keep the outlet clear of debris. Sensors auto zero after purge to prevent sensor drift.
  • Redundant data storage when connected to an external logger.
  • Meteorology and Climatology
  • Disaster Warning
  • Water Level and Flow
  • Water Quality
  • Hydrology