GasMix AIOLOS III - Dynamic Gas Mixer and Diluter
Using GasMix ™ Aiolos III you benefit of :
- Exceptional Accuracy and Reproducibility:
AIOLOS III generates calibration gas on-site at desired concentrations—even at very low levels—with remarkable precision. Each Mass Flow Controller (MFC) is factory-calibrated at multiple points, ensuring reliable and reproducible gas standards. This rigorous metrology guarantees full traceability and certification of concentration accuracy, fully compliant with ISO 6145-7 standards. - Time-Saving Automation:
The system’s dedicated, user-friendly software controls all aspects of the operation—from calculating mixtures to programming dilution sequences. With fully automated injection, dilution, and flushing sequences that can be synchronized with an external analyzer, operator bench time is significantly reduced. This makes routine quality procedures much less labor-intensive. - Versatility and Flexibility:
Whether you need to mix or dilute two to six gases simultaneously, the AIOLOS III is designed to handle a variety of gas matrices. It is particularly well-suited for applications across environmental analysis, petrochemical industries, research, specialty gas mixtures, and even food and flavor quality control. Options such as a fully inert version for aggressive gases or an injection valve-equipped model further enhance its adaptability. - Robust and Intuitive Design:
Crafted with a focus on metrological performance, the AIOLOS III features a robust design that delivers a high dilution ratio (up to 10^8), flow accuracy of ±1%, and response times of less than five seconds. Its intuitive interface and seamless integration of calibration curves for each gas ensure that both routine and complex gas mixing tasks are performed with ease.
User-Friendly Software:
- Intuitive Operation: GasMix™ features dedicated, user-friendly software that simplifies system control, mixture calculations, and calibration table management.
- Automated Sequences: The software allows programming of required mixtures and dilutions into sequences, enabling fully automatic multipoint calibrations.
- Analyzer Integration: It can operate an optional injection valve and communicate directly with analyzers, streamlining the calibration process.
- Reduced Operator Time: Operators simply connect the cylinders, set the input pressure, launch the sequence, and return later to review results, significantly minimizing bench time.
Exceptional Metrology:
- Rigorous Calibration: Each Mass Flow Controller (MFC) in GasMix™ instruments undergoes a meticulous factory calibration at multiple points across the entire range, ensuring high accuracy and linearity, especially at low and high ends.
- Gas-Specific Calibration: This calibration process is repeated for each selected gas matrix (e.g., He, Ar, CH₄, H₂, N₂, Air), with multipoint calibration tables stored in the software and automatically applied for the chosen gas.
- Uncertainty Reporting: The instrument not only prepares gas mixtures accurately but also calculates and reports the maximum relative uncertainty for each delivered concentration.
Unique Features:
- Certified Concentrations: GasMix™ diluters are unique in the market, capable of delivering certificates for the produced concentrations. CAC Gas & Instrumentation
- Safety Protocols: To ensure safety and quality, Aiolos III automatically stops mixing in response to user-defined alarm settings.
- Comprehensive Audit Trail: The audit trail function tracks all events as they occur, including alarms, deviations, and logins. Power users can access this information anytime, even months after the operation was performed, ensuring complete traceability.
General
- Number of gas channels: 2 to 6
- Inlet Gas Pressure: 3 bar(g) nominal, max 8 bar(g)
- Outlet Pressure: atmospheric up to 7 bar(g)
- Connections: Swagelok 1/8′ ,other on request
- Gas compatibility: pure gases, concentrated gas mixtures, most of aggressive and reactive gases (for specifics, contact us)
Performance characteristics of AIOLOS III
- Mixing: mixing up to 6 channels simultaneously
- Dilution ratio of the initial concentration: up to 10^8
- MFC operation range: 2 to 100% of full scale
- Flow accuracy: ±1% of the required value over the entire scale
- Repeatability: less than 0.1% of the requested value
- Response time to the setpoint: <5 sec
Other
- Operation temperature: 10 – 50°C
- Power supply: 90-260Vac, 1,5-4A, 50-60Hz
- Dimensions: L x l x h (cm) : 45 x 22 x 38 (or 45 x 22 x 59 with options)
- Weight: approx. 14 kg (depends on configuration)
Who Benefits from using the AIOLOS III ?
- Environmental – Calibration of analysers for ambient air monitoring
- Chemical, Oil & Gas – Calibration of GC, μGC, Elemental analyzers, RGA, NGA; LPG analyzers, Spectrometers
- Research: Generation complex gas mixtures
- Specialty Gases – Customized secondary standards
- Food & Flavour – Quality control
A fully inert version
Gas mixer, diluter compatible with most aggressive gases and active compounds like sulfurs gases, NO, ammonia, VOC.
A version with injection valve
This model of gas mixer, diluter is fitted with a driven gas loop and injection valve. Interface cable included. Remote control functionality allows for the ability to drive an external injection valve the start command of an analyzer.
FReD
FReD is optional automated flow regulator to be placed downstream to the diluter. The output flow rate can be set and accurately controlled directly by GasMix™ software.
LPG version with add-on option
Designed and produced by AlyTech, the new external LPG module AURA for GasMix™ gas mixer, diluter allows to perform Gas and LPG analyses according to the ASTM D6667 or ASTM D7551 method for instance, based on a multipoint calibration.
The AURA is LPG vaporizer device equipped with a heat regulator to set optimal evaporation temperature and heated transfer lines. It makes Aiolos III a Unique Universal Gas & LPG Sampler and Injector. It will allow you significantly reduce the number of calibration gas cylinders to store! Reed More about AURA