- Home
- Companies
- INDAG Maschinenbau GmbH
- Products
- INDAG - Model DLM/P - Dynamic Inline ...
INDAG - Model DLM/P -Dynamic Inline Mixer Nonfood for Shear Sensitive Mixing
INDAG intensive inline mixer type DLM/P is used to mix homogeneously mixer shear sensitive liquids with additives. Even if concentration of additive (i.e. 0,01%) is very small, mixing result will be absolutely homogeneous. Introduced mixing energy will not increase temperature of product more than 1°C. Especially shear sensitive products like aerated foams will not be destroyed by INDAG intensive inline mixer DLM/P. A small selection of examples for applications are: mixing of reactive additives into adhesive; mixing of pre emulsions with solvents; mixing of polybutadiene with water; mixing of collagen with colour; …
- Very good self-cleaning during CIP-cleaning
- No pressure loss
- Homogenous mixing result even for extreme concentration ratios
- Efficient introduction of mixing energy
- Mixing energy can be changed variable and adapted to product or capacity changes
- Temperature increase less than 1 °C
- Gentile mixing of shear sensitive products
INDAG intensive inline mixer type DLM/P consists of round shape mixing elements on rotor and in stator (mixer casing). Round shape mixing elements are extremely robust to allow mixing of highly viscous products (> 10,000,000 mPas). Mixing energy is introduced efficiently into product. It is possible (as an option) to heat or cool rotor and stator. INDAG mixer DLM/P is designed in a modular way. DLM/P is offered in a compact design (KB) and a foundation plate design (LB). Compact design means that rotor is supported by drive shaft of motor. Foundation plate design means that rotor is supported by its own bearing block. An own bearing block allows a loner rotor and a larger mixing volume. DLM/P can be equipped with single acting mechanical seal or double acting mechanical seal. INDAG mixers are designed likewise for explosive range and products (ATEX).
Positioning
horizontal or vertical position of mixer is possible
Pressure levels
6 bar, 10 bar, 16 bar, 25 bar, 40 bar, 100 bar
Materials
1.4301 (AISI 304), 1.4404 (AISI 316 L), 1.4539 (AISI 904L), 14462 (AISI 318), Teflon coated, Tantal coated
Seals
Single acting mechanical seal; double acting mechanical seal; stuffing box seal, visco seal
Connections
EN, DIN, ANSI flange
Rotational speed
100 rpm to 1,800 rpm
Capacities
50 l/h to 60,000 l/h
Temperatures
0 °C to 250 °C
Viskosities
1 mPas to 10,000,000 mPas