- Home
- Companies
- Creative Materials
- Products
- Creative Materials - Model 125-10 - ...
Creative Materials - Model 125-10 -Electrically Conductive Ink
125-10 electrically conductive ink and coating suitable for application by screen printing and syringe dispensing. This product features excellent adhesion to Kapton, Mylar, glass and a variety of other surfaces. Unlike conventional conductive materials, this product is very resistant to flexing and creasing. Some applications for 125-10 include, but are not limited to, EMI/RFI shielding of polyimide flexible circuits, polymer thick film circuitry, membrane switches, electrical attachments for surface mounted devices, and anode coatings for tantalum capacitors. For some applications, 125-10 can be used as a lower cost alternative to some of our standard conductive inks.
Consistency: Smooth Paste
Percent Filler, cured: 88
Crease Resistance: Excellent
Volume Resistivity (Ω-cm): 0.00004
Sheet Resistivity (Ω/sq/mil, MAX.): 0.015
Solderable: No
Hydrolytic Stability: Excellent
Useful Temperature Range (°C): -55 to +200
Thermal Stability (°C): Good to +325
Theoretical Wet Coverage (in2/gm/mil): 29 *
Specific Gravity: 2.07
SUGGESTED HANDLING & CURING: 125-10 is ready to use as supplied. Further thinning may be accomplished by adding small amounts of thinner 102-03. When working with polycarbonate thin with 120-08. Prior to using, be certain to re-suspend fillers. Best properties, for most applications, result when cured for several minutes at 170°C to 180°C. Good properties are obtained on a variety of substrates by drying and curing at temperatures ranging from 50°C to 150°C. End user is advised to experimentally determine temperature and time best suited for individual applications.
STORAGE: Shelf Life - 6 months at 25°C; or 9 months at 5°C; or 12 months at -10°C.
SAFETY & HANDLING: Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin.